Harbor Freight Tools 46095 Owner's Manual

10 DRIP NOZZLE WATERING

DRIP KIT

Model 93261 / Model 46095

ASSEMBLY AND OPERATING INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our W eb site at http://www.harborfreight.com

TO PREVENT SERIOUS INJUR Y , READ AND UNDERST AND

ALL WARNINGS AND INSTR UCTIONS BEFORE USE.

manual or any artwork contained herein may be reproduced in any shape or form

For technical questions and replacement parts, please call 1-800-444-3353

REV 07/05

without the express written consent of Harbor Freight Tools.

PRODUCT SPECIFICATIONS

Item Description

Hose Length/Diameter Model 93261: 150 Ft., ¼” O.D. x 3/16” I.D.

Maximum Operating Pressure Accessories Faucet to Hose Connector (Qty. 1) / Threaded Adapter Coupler (Qty. 1)

Approximate Unit Weight 3.20 Pounds

Model 46095: 100 Ft., ¼” O.D. x 3/16” I.D. 55 PSI

Water Pressur e Regulator (Qty. 1) / Faucet Gasket (Qty. 1) Faucet Gasket w/Filter Screen (Qty. 1) / Hose Tee (Qty. 14) Plastic Tube (Qty. 5) / Tie-Down Stake (Qty. 15) Plastic Hose Coupler (Qty. 2) In-Line Hose Coupler w/Drip Nozzle Flow Thru w/Small Pin Hole (Qty. 10) Hose Nail-Down Clip (Qty. 10) / Faucet Connector (Qty. 1) Terminal Drip Nozzle w/No Pin Hole (Qty. 10)

SAVE THIS MANUAL

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

UNPACKING

When unpacking, check to make sure that all parts listed in the Parts List on page 7 are included. If any parts are missing or broken, please call Harbor

Freight Tools at the number shown on the front cover of this manual as soon as possible.

GENERAL SAFETY WARNINGS AND PRECAUTIONS

W ARNING: When using tools to install this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted.

SKU 93261 46095

For technical questions, please call 1-800-444-3353.

Page 2

Do not use electrically powered tools in the presence of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords .

4. Store idle equipment. When not in use, tools m ust be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

5. Do not force the product. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the product’ s capacity.

6. Use the right product for the job. Do not attempt to f orce a small product or attachment to do the work of a larger industrial product. There are certain applications for which this product was designed. Do not modify this product and do not use this product for a purpose for which it was not intended.

7. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protectiv e, electrically non-conductiv e clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

8. Use eye and ear protection. Always wear ANSI approved impact safety goggles when setting up this product and when working with tools and equipment.

9. Do not overreach. K eep proper f ooting and balance at all times.

10. Maintain products with care. Inspect all components and the hose periodically and, if damaged, have defective items repaired or replaced by an authorized technician.

11. Disconnect when not in use. When the Drip Kit is not being used, disconnect from the water source and store all components in a dry location.

12. Stay alert. Watch what you are doing, use common sense. Do not assemble or operate any product when you are tired.

13. Check for damaged par ts. Before using any product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the product if it is not working properly.

14. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use

SKU 93261 46095

For technical questions, please call 1-800-444-3353.

Page 3

+ 4 hidden pages