Page 1
CREEPER
WITH ADJUSTABLE HEADREST
Model 46087
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2001 by Harbor Freight Tools. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Page 2
Specifications
Maximum Weight Capacity 250 Lbs.
Overall Dimensions 40-3/16” L x 16-15/16” W x 3-7/8” H
Head Rest Adjustments Four @ 0, 15, 25, 32 Degrees
Casters 6 @ 2-3/8” Dia. x 3/4” W
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Avoid working alone. If an accident happens, an assistant can bring help.
2. Avoid electrical shock. Use extreme caution when clamping around
uninsulated conductors or bus bars. Prevent body contact with grounded
surfaces such as pipes, radiators, ranges, and cabinet enclosures when
testing voltages.
3. Keep work area clean. Cluttered areas invite injuries.
4. Observe work area conditions. Don’t expose to rain. Keep work area well
lighted.
5. Keep children away. Children must never be allowed in the work area. Do
not let them handle Creeper. Do not let children ride on the Creeper.
6. Store idle equipment. When not in use, Creeper must be stored in a dry
location to inhibit rust. Always lock up Creeper and keep out of reach of
children.
7. Dress properly. Do not wear loose clothing or jewelry as they can be
caught in moving parts. Protective, electrically nonconductive clothes and
nonskid footwear are recommended when working. Wear restrictive hair
covering to contain long hair.
8. Use eye and ear protection. Always wear ANSI-approved impact safety
goggles.
SKU 46087 Page 2
Rev 08b
Page 3
9. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. Do not modify this tool and do
not use this tool for a purpose for which it was not intended.
10. Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
11. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician.
12. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.
13. Do not operate Creeper if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the creeper.
14. Maintenance. For your safety, maintenance should be performed
regularlyby a qualified technician.
Warning: The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood by the operator that common
sense and caution are factors which cannot be built into this product,
but must be supplied by the operator.
Unpacking
When unpacking, check to make sure the parts listed on page 4 are included. If
any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual.
1. If you raise the vehicle to work under it, set the vehicle on jack stands. Do not
work under a vehicle raised on a jack. If the vehicle is on the ground, block the
tires, set the parking brake, and put it in gear or Park.
2. Adjust the headrest using the Adjustment Lever (#5) down to 0 degrees.
Keep your head flat on the Head Cushion (#4) while you slide under the vehicle,
then adjust the Head Cushion (#4) to a comfortable angle.
3. Lower the Head Cushion (#4) to 0 degrees to slide the Creeper out.
SKU 46087 Page 3
Operation
Page 4
.
Maintenance
1. Wipe down cushions with a damp cloth.
2. Clean off any grease or debris which accumulates on casters.
3. Check hardware and tighten if necessary.
Note: Maximum Weight Capacity is 250 Lbs.
4
2
Assembly Drawing
3
1
5
Parts List
Part No. Description
1 Frame
2 Casters Qty (6)
3 Body Cushion
4 Head Cushion
5 Adjustment Lever
6 Hardware (not shown)
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO
THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
NOTE: Some parts are listed and shown for illustration purposes only and are not
available individually as replacement parts.
SKU 46087 Page 4
Loading...