Harbor Freight Tools 46075 User Manual

UNIVERSAL METAL TOOL STAND

46075

ASSEMBLY INFORMATION

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Copyright© 2001 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork

contained herein may be reproduced in any shape or form without the express written consent of

Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Revised Manual 09j

SPECIFICATIONS TABLE

ITEM DESCRIPTION

Dimensions 18-3/8” x 20-1/2” (Top)

32-3/8” (Height)
26-3/8” x 24-1/2” (Base - Leg Spread)

Maximum Weight Capacity 500 Lbs.

Height Adjustment 3” Increments (32-29-26 inches)

Mounting Holes 8 Holes @ 0.310” Diameter

Leg Anchor Holes 4 Holes @ 0.310” Diameter

Material 16 Ga. Low Carbon Steel

Weight 19.40 Lbs.

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly,
inspection, maintenance, and cleaning procedures. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep this
manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY WARNINGS AND PRECAUTIONS

1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas
invite injuries.

2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.

3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment and
keep out of reach of children.

4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.

5. USE EYE PROTECTION. Wear ANSI approved safety impact eye glasses when
using this product. ANSI approved safety impact eye glasses are available from
Harbor Freight Tools.

SKU 46075 PAGE 2

6. DRESS SAFELY. Non-skid footwear or safety shoes should be used when
working with this product. Do not wear loose clothing or jewelry as they can
become caught in moving parts. Wear a protective hair covering to prevent long
hair from becoming caught in moving parts. If wearing a long-sleeve shirt, roll
sleeves up above elbows.

7. INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.

8. DO NOT OVERREACH. Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etcetera.

9. STAY ALERT. Watch what you are doing at all times. Use common sense. Do
not use this product when you are tired or distracted from the job at hand.

10. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that
it will operate properly and perform its intended function. Check for damaged
parts and any other conditions that may affect the operation of this product.
Replace or repair damaged or worn parts immediately.

11. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only
identical replacement parts. Only use accessories intended for use with this
product. Approved accessories are available from Harbor Freight Tools.

12. MAINTAIN THIS PRODUCT WITH CARE. Keep this equipment clean and dry for
better and safer performance.

13. MAINTENANCE: For your safety, service and maintenance should be performed
regularly by a qualified technician.

14. USE THE RIGHT PRODUCT FOR THE RIGHT JOB. There are certain
applications for which this product was designed. Do not use small equipment,
tools or attachments to do the work of larger industrial equipment, tools or
attachments. Do not use this product for a purpose for which it was not intended.

SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS

1. DO NOT EXCEED THE 500 POUND WEIGHT BEARING CAPACITY FOR THIS
TOOL STAND.

2. READ AND UNDERSTAND ALL INSTRUCTIONS AND SAFETY
PRECAUTIONS AS OUTLINED IN THE MANUFACTURERS’ MANUALS OF
THE TOOL(S) TO BE USED WITH THE TOOL STAND PRIOR TO USING THIS
PRODUCT.

SKU 46075 PAGE 3