Item 45076 General Purpose
Rope Hoist
Assembly and Operating Instructions
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2001 by Harbor Freight Tools®. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Thank you for choosing a Harbor Freight Tools product! For future reference, please complete the
owner’s record below:
Model:___________________ Purchase Date:__________________
Save the receipt, and these instructions. It is important that you read the entire instruction manual
to become familiar with this product before you begin using it.
Technical Specications:
Polypropylene rope and zinc safety hooks can lift up to 500 Lbs. weight. Double grip safety hooks
hold hoist safely in place. Rope length = 65’ X 1/4” diameter. Net weight = 1.3 Lbs.
General Safety Warnings and Precautions
1. Read this instruction sheet completely before setting up and using this product.
2. Wear eye protection. Always wear ANSI approved safety goggles when setting up this product,
and while working with tools and equipment.
3. Weight capacity of the Rope Hoist is 500 Lbs. Do not exceed this weight capacity.
4. Keep children away from work area. Do not allow children to handle this product.
Caution: Strangulation danger is present if children are allowed to play with this product.
5. Store idle equipment. When not in use, lock up tools and equipment and keep out of reach of
children.
6. Do not use this product if under the inuence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgment or reexes are impaired while taking drugs. If there
is any doubt, do not attempt to use this equipment.
45076 Rev 01e; 08c Page 1
General Safety Warnings and Precautions (continued)
7. Do not overreach. Keep proper footing and balance at all times to prevent tripping, falling, back
injury, etcetera.
8. Stay alert. Watch what you are doing at all times. Use common sense. Do not use this
equipment when you are tired or distracted from the job at hand.
9. Check for damaged parts. Before each use, check the entire rope for fraying or other damage.
Check the pulley wheels and safety hooks for damage; never use the Rope Hoist if any
component is damaged.
10. Maintain this product with care. Keep this product clean and dry for better and safer
performance.
11. For your safety, service and maintenance should be performed regularly by a qualied
technician.
12. Use the right product for the right job. There are certain applications for which this product
was designed. Do not use small equipment, or a small tool or attachment to do the work of
larger industrial equipment, tools and attachments. Do not use this product for a purpose for
which it was not intended.
13. Do not force the equipment. This product will do the work better and safer at the speed and
capacity for which it was designed.
14. Wear work gloves. Always wear heavy duty work gloves when using the Rope Hoist. Be careful
not to get work gloves caught in moving parts.
15. Maintain safe work area. Before and during the lift or pull, keep spectators clear of the work
area. Keep clear of the area under the lifted item at all times.
Unpacking
When unpacking, check to make sure all parts shown on the Parts List (Page 3) are included. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown on page one
of this instruction manual.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR
SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
45076 Rev 01e Page 2
Usage Instructions
1. Carefully plan the location of the General Purpose
Rope Hoist. The upper Safety Hook must be rmly attached to a rope, chain or some structure that will fully
support the weight of the object to be lifted or pulled (500
Lbs. maximum). Warning: All 3 parts of the Safety Hook
must be engaged to the supporting rope, chain, or structure. Failure to engage the hook properly could result in
personal injury and/or property damage.
2. When setting up the Rope Hoist, (see photo at right),
note the difference in the Upper and Lower Hoist. The
Lower Hoist includes the end-of-rope locking device. This
Lower Hoist should always be connected to the object
that is to be lifted or pulled.
3. With the upper Safety Hook supporting the Rope
Hoist, inspect and test the Rope Hoist before attempting to lift the workpiece. Make sure the rope is in good
condition; make sure the rope is not kinked-up or twisted
between the hoists. Pull the loose pulling rope to make
sure the hoists are functioning properly.
4. After testing the Rope Hoist and nding that the hoist
is functioning properly, you are now ready to use the
product to lift or pull the workpiece.
5. Connect the 3 parts of the lower Safety Hook to a
supporting chain, rope or other connecting device that is
supporting the workpiece to be lifted or pulled.
Caution: Maintain safe work area. Before and during the lift, keep spectators clear
of the work area. Keep clear of the area under the lifted item at all times. Caution:
Periodically check all components of the Rope Hoist to make sure the product is in
good working condition.
Loose Pulling
Rope
Parts Diagram
Safety Hook
(3 Piece)
(#2)
Upper Hoist
(#1)
Rope
(#4)
Lower Hoist
(#1)
End-of-Rope
Locking Device
(#3)
Safety Hook
(3 Piece)
(#2)
6. Carefully pull the loose Pulling Rope and slowly lift or pull the workpiece. Always wear heavy
duty work gloves when operating the Rope Hoist. Make sure the work gloves do not get caught in
moving parts. Tension must be maintained on the loose Pulling Rope to keep the workpiece aloft.
After the workpiece is in the desired position, it can be lowered by slowly and carefully releasing
tension in the loose Pulling Rope.
Caution: The General Purpose Rope Hoist is intended for short term lifting or
pulling projects. DO NOT HANG A LIFTED WORKPIECE FOR AN EXTENDED
PERIOD OF TIME. After the lift or pull is complete, safely support the workpiece and
disconnect the Rope Hoist.
When not in use, the Rope Hoist should
be stored in a dry location that is out of
reach of children.
Part # Description Qty
1 Hoist (Upper & Lower) 2
2 Safety Hook (3 Piece) 2
3 Rope Locking Device 1
4 Rope 1
Parts List
Note: Some parts are listed and shown
for illustration purposes only, and are
not available individually as replacement
parts.
45076 Rev 05/01 Page 3
Loading...