Harbor Freight Tools 34542 User Manual

MANUAL TIRE CHANGER

Model 34542

ASSEMBLY AND OPERATING INSTRUCTIONS

Tire not included.

Do to continuing improvements, actual product may differ slighlty

from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions, please call 1-800-444-3353.

REV: 10/06

PRODUCT SPECIFICATIONS

Item Description

Product Applications Will handle all tires from 8” to light trucks

such as 7.5” x 16” and flotation tires up

to sizes 12.5”L x 16”. Base Dimensions 15” x 18” Base Mounting Holes 7/16” Diameter (Qty. 4) Mounting/Dismounting Bar Dimensions Wheel Rest Plate Dimensions 7-1/2” Diameter x 3/16” Thick Leg Dimensions 1-1/2” x 3” x .15 (Wall Channel) Main Column Dimensions 2-7/8” Diameter Construction All Steel Additional Features No Air or Electrical Connections Required.

Approximate Weight 42 Pounds

37” Long x 1-15/16” Diameter

Designed to Protect Tube From Damage.

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES AND PRECAUTIONS

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1. Keep your work area clean and well lit. Cluttered benches and dark areas

invite accidents.

2. Do not operate tools and equipment in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Tools and equipment can create sparks which may ignite the dust or fumes.

SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 2

3. Keep bystanders, children, and visitors away while operating tools and

equipment. Distractions can cause you to lose control. Provide barriers or shields as needed.

PERSONAL SAFETY

1. Stay alert. Watch what you are doing, and use common sense when oper-

ating tools and equipment. Do not use a tool or equipment while tired or under the influence of drugs, alcohol, or medication. A moment of inatten-

tion while operating tools and equipment may result in serious personal injury.

2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.

Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

3. Do not overreach. Keep proper footing and balance at all times. Proper

footing and balance enables better control of the power tool in unexpected situations.

4. Use safety equipment. Always wear eye protection. Always wear ANSI-approved safety impact goggles and a full face shield when using and/or installing this product.

TOOL USE AND CARE

1. Do not force the tool. Use the correct tool for your application. The correct

tool will do the job better and safer at the rate for which it is designed.

2. Store idle tools out of reach of children and other untrained persons. Tools

are dangerous in the hands of untrained users.

3. Maintain tools with care. Properly maintained tools are less likely to malfunc-

tion and are easier to control. Do not use a damaged tool. Tag damaged tools “Do Not Use” until repaired.

4. Check for misalignment or binding of moving parts, breakage of parts, and

any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly main-

tained tools.

5. Use only accessories that are recommended by the manufacturer for your

model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 3

SERVICE

1. Tool service must be performed only by qualified repair personnel. Service

or maintenance performed by unqualified personnel could result in a risk of injury.

2. When servicing a tool, use only identical replacement parts. Follow

instructions in the manual. Use of unauthorized parts or failure to follow maintenance instructions

may create a risk of electric shock or injury.

“Inspection, Maintenance, And Cleaning”

section of this

SPECIFIC SAFETY RULES AND PRECAUTIONS

1. Maintain labels and nameplates on the Tire Changer. These carry impor-

tant information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

2. Make sure the Tire Changer is located on a flat, level, sturdy surface ca-

pable of supporting the weight of the Tire Changer, tires, and any additional tools and equipment.

3. Industrial applications must follow OSHA guidelines.

4. Never stand on the Tire Changer. Serious injury could result if the Tire

Changer is tipped.

5. Do not allow children and other unauthorized people to handle or play with

the Tire Changer.

6. Do not force the Tire Changer. This tool will do the work better and safer at

the speed and capacity for which it was designed.

7. Prior to using the Tire Changer, always read and follow the instructions and

safety precautions as outlined in the tire manufacturer and vehicle manufacturer’s owners manuals.

8. Never leave a vehicle running when changing/repairing tires. When running an Engine in an enclosed area, the Engine produces carbon monoxide, a colorless, odorless, toxic gas that, when inhaled, can cause serious personal injury or death. Whenever possible, use a carbon monoxide detector (not included) to detect excessive carbon monoxide fumes in the work area and in the surrounding area.

9. Do not use this product if under the influence of alcohol or drugs. Read

warning labels on prescriptions to determine if your judgement or reflexes are

SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 4

+ 7 hidden pages