Harbor Freight Tool Central Pneumatic Owners Manual
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference. 18h
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
To ol s re q u ir e d fo r as s e mb l y a n d s e r vi c e m a y n o t b e in c l ud e d .
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
SPECIFICATIONS
Working air pressure: 25 - 60 PSI
Air Outlet Size: 1/8" - 27 NPS
Housing:
Metal Cup: 5 cc
Glass Jar capacity: 22 cc
Glass Jar size: 1-3/8" Diameter X 1-7/8" H
Nozzle size: .35 mm
Air Brush dimensions: 6" L X 1-7/8" W X 3-1/2" H
Air ow adjustable control:
Save This Manual
You wil l need t h is manu a l for t he saf e ty w arn i ng s and pre c au ti o ns , asse mbl y,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Write the product’s serial number in the back of the manual near the
assembly diagram, or write month and year of purchase if product has no serial number.
Keep this manual and invoice in a safe and dry place for future reference.
Brass chrome plated, with blue anodized
aluminum needle cover.
Manometer nger lever pressure
regulator.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Wear protection. Always wear ANSI-approved safety goggles when using or
servicing this Air Brush. Follow all safety warnings for the paint you are using.
3. Do not exceed maximum air pressure of 60 PSI.
4. Do not operate in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Doing so may create sparks which may ignite the dust or
fumes.
Page 2Item 95810 For technical questions, please call 1-800-444-3353.
5. Keep bystanders, children, and visitors away while operating. Provide barriers or
shields as needed.
6. Store idle tools out of reach of children. This Air Brush should not be in the
hands of untrained users. It is not a toy and may be damaged if not used properly.
Never allow children to play with this product.
7. Maintain tools with care. Keep cutting tools clean. Do not use a damaged tool.
Tag damaged tools “Do not use” until repaired.
8. Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used
on another tool.
SERVICE
1. Service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in damage to this
Air Brush.
2. When servicing this Air Brush, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the tool. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
2. This Air Brush is for spray painting only: Never use it for spraying gasoline,
kerosene or other flammable solvent.
3. Avoid injury: NEVER direct compressed air from Air Brush at people or animals.
NEVER direct airflow at eyes or ears.
4. Always maintain adequate ventilation, especially during clean up. Be sure to where
ANSI-approved safety goggles and face mask whenever appropriate.
NOTE: All paints used with this Air Brush are fast drying by design and can seriously
damage your tool if they are not flushed immediately after usage. NEVER let product
sit inside the Air Brush unit for an extended period of time. Most of the paint you will
be using can dry in minutes, or less.
UNPACKING
When unpacking, check to make sure that the is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
Page 3Item 95810 For technical questions, please call 1-800-444-3353.
Loading...