Harbor breeze TG44MBK3D1RC User Manual

ITEM #1461039

BEACH CREEK

LED CEILING FAN

MODEL #TG44MBK3D1RC

Español p. 20

ATTACH YOUR RECEIPT HERE

Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.

BM19330

TABLE OF CONTENTS

Safety Information ...............................................................................................................

Package Contents ..............................................................................................................

Hardware Contents

...........................................................................................................................

. 2

. 4

Preparation ........................................................................................................................... 5

Initial Installation ................................................................................................................... 5

Downrod-Style Fan Mounting ............................................................................................... 8

Closemount-Style Fan Mounting ........................................................................................

.10

Wiring ...................................................................................................................................12

Final Installation .................................................................................................................. 14

Operating Instructions ......................................................................................................... 15

Care and Maintenance ...................................................................................................

.... 17

Troubleshooting .................................................................................................................. 18

Limited Lifetime Warranty ................................................................................................... 19

Replacement Parts List ....................................................................................................... 19

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for repairs, it must be shipped in its original packaging to ensure proper protection against damage that might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure all connections are secure to prevent the fan from falling.

• The net weight of this fan is: 14.74 lbs.

SAFETY INFORMATION

WARNING

To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box

marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. OR LESS" and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box; do NOT use a plastic outlet box. Secure the outlet box directly to the building structure. The outlet box and its support must be able to support the moving weight of the fan (at least 35 lbs.).

To avoid personal injury, the use of gloves may be necessary while handling fan parts with sharp edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your house wire is larger than 12-gauge or there is more than one house wire to connect to the corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock or personal injury, do not bend the blades when installing or balancing them, or cleaning the fan. Do not insert objects between the rotating fan blades.

To reduce the risk of personal injury, use only parts provided with this fan. The use of parts OTHER than those provided with this fan will void the warranty.

Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid electrical shock.

CAUTION

Be sure outlet box is properly grounded and that a ground wire (green or bare) is present.

Before beginning installation, carefully check all screws, bolts and nuts on fan motor assembly to ensure that they are secured.

Do NOT tamper with or attempt to repair LED component. The light source is designed for this specific application and should not be serviced by untrained personnel. If any servicing is required, call our customer service department.

NOTE: Dimmable to 10% with select dimmers. See Lowes.com for more information.

PACKAGE CONTENTS

A B

DESCRIPTIONPART

Downrod 1 Canopy

QUANTITY

C Mounting Bracket 1

D Motor Housing 1

Yoke Cover 1 F LED Light Kit G

Canopy Mounting Screw 4 (preassembled)

Motor Screw 6

(preassembled)

I Lock Washer (preassembled) 6 J Blade 3

IMPORTANT REMINDER: You must use the

parts provided with this fan for proper installation and safety.

DESCRIPTIONPART

QUANTITY

K Glass Shade 1 L Pin (preassembled) 1 M Clip (preassembled) 1 N O Remote Control Receiver

Balancing Kit 1

Remote Pack

HARDWARE CONTENTS (shown actual size)

Blade

Screw

Qty. 9

+ 1 extra

Fiber

Blade

Washer

Qty. 9

+ 1 extra

Wire

Connector

Qty. 4

PREPARATION

Before beginning assembly of product, make sure all parts are present. Place motor on carpet or on foam to avoid damage to ﬁnish. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook and Wire Cutters

INITIAL INSTALLATION

Turn off circuit breakers and wall switch to the fan

1. supply line leads.

DANGER: Failure to disconnect power supply prior to installation may result in serious injury or death.

OFF

INITIAL INSTALLATION

Determine mounting method to use.

A. Downrod mount (standard or angled ceiling) B. Closemount (standard ceiling only)

IMPORTANT: If using the angle mount, check to

make sure the ceiling angle is not steeper than 19°.

19° max.

*Helpful Hint: Downrod-style mounting is best

suited for ceilings 8 ft. or higher. For taller ceilings you may want to use a longer downrod (not included). Angle-style mounting is best suited for angled or vaulted ceilings. A longer downrod is sometimes necessary to ensure proper blade clearance. Closemount mounting is more suitable for ceilings lower than 8 ft. high.

Check to make sure blades (J) will be at least 30

3. in. from any obstruction and at least 7 ft. above the floor.

30 in.

min.

7 ft. min.

Temporarily raise canopy (B) to mounting bracket (C) and determine which 2 canopy mounting screws (G) align with slotted holes in canopy (B). Partially loosen these 2 canopy mounting screws (G) and remove the other two; save for later use.

+ 13 hidden pages