Harbor Breeze MZ44BNK3LR, MZ44ORB3LR User Manual

Harbor Breeze® is a registered trademark of
LF, LLC. All Rights Reserved.

ITEM #0807421

0807422

MAZON CEILING FAN

MODEL #MZ44BNK3LR

MZ44ORB3LR

Español p. 18

ATTACH YOUR RECEIPT HERE

ADJUNTE SU RECIBO AQUÍ

ATTACH YOUR RECEIPT HERE
Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday - Sunday.

BM19404

4007498

1

TABLE OF CONTENTS

Safety Information .................................................................................................................2

Package Contents ...............................................................................................................

Hardware Contents ...............................................................................................................6

.

.5

Preparation .......................................................................................................................

Initial Installation ....................................................................................................................6

Wiring ..............................................................................................................................

Final Installation ...................................................................................................................10

Operating Instructions .........................................................................................................13

Care and Maintenance ......................................................................................................

Troubleshooting ..................................................................................................................16

Limited Lifetime Warranty ...................................................................................................17

Replacement Parts List .....................................................................................................

SAFETY INFORMATION

....

.......

.

.15

.

.17

.6

.9

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, install or operate the
product.

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for
repairs, it must be shipped in its original packaging to ensure proper protection against damage that
might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical
Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring
handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to
the floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure all connections are secure to prevent the fan from falling.

• The net weight of this fan including the light kit is: 14.77 lbs.

2

SAFETY INFORMATION

DANGER

When using an existing outlet box, make sure the outlet box is securely attached to the building
structure and can support the full weight of the fan. Failure to do this can result in serious injury or
death. The stability of the outlet box is essential in minimizing wobble and noise in the fan after

installation is complete.

To reduce the risk of serious bodily injury, DO NOT use power tools to assemble any part of the

fan, including the blades.

WARNING

To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box
marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. (15.9 KG) OR LESS" and
use mounting screws provided with the outlet box. Most outlet boxes commonly used
for the support of lighting fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box; do NOT use a
plastic outlet box. Secure the outlet box directly to the building structure. The outlet box and its
support must be able to support the moving weight of the fan (at least 35 lbs.).

To avoid personal injury, the use of gloves may be necessary while handling fan parts with
sharp edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan
are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your
house wire is larger than 12-gauge or there is more than one house wire to connect to the
corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control
device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock or personal injury, do not insert objects between the
rotating fan blades.

To reduce the risk of personal injury, use ONLY parts provided with this fan. The use of parts
OTHER than those provided with this fan will void the warranty.

Before installation, be sure to shut off electricity at main switch or circuit breaker in order to avoid
electrical shock.

3

SAFETY INFORMATION

CAUTION

Be sure outlet box is properly grounded and that a ground wire (green or bare) is present.

Once installation is complete, carefully check all screws, bolts and nuts on fan motor assembly to
ensure they are secure.

Read all instructions and safety information before installing your new fan. Review the
accompanying assembly diagrams.

Modifications not approved by the party responsible for compliance could void the user's authority
to operate the equipment.

*NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTE: Dimmable to 10%.

4

PACKAGE CONTENTS

J

A

I

B

L

C

K

G

D

F

H

A
B
C

DESCRIPTIONPART

Mounting Plate 1
Canopy Ring
Motor Assembly

QUANTITY

1

1
D Fitter Plate 1
E

Glass Shade

1

F Fitter Plate Screw 3

(preassembled)
G

Blade 3

IMPORTANT REMINDER: You must use the
parts provided with this fan for proper installation
and safety.

E

DESCRIPTIONPART

QUANTITY

H LED Light Kit 1
I

Mounting Plate Lock 4

Washer (preassembled)

J

Mounting Plate Screw 4

(preassembled)

K Motor Plate Screw 3
(preassembled)

L Remote Pack

1

5

HARDWARE CONTENTS (shown actual size)

AA

Blade

Screw

BB

Fiber

Blade

CC

CC

Wire

Connector

Washer

Qty. 9

+ 1 extra

Qty. 9

Qty. 3

+ 1 extra

+ 1 extra

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety
Glasses, Stepladder and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself-Wiring Handbook and

Wire Cutters

INITIAL INSTALLATION

1.

Turn off circuit breakers and wall switch to the fan
supply line leads.

1

DANGER: Failure to disconnect power supply
prior to installation may result in serious injury or

ON

death.

ON

OFF

OFF

6