Harbor Breeze L0982 User Manual

Harbor Breeze® is a registered trademark

of LF, LLC. All Rights Reserved.

ITEM #0396772

MODEL #L0982

TWIN BREEZE II CEILING

FAN

Questions, problems, missing parts?

Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5
p.m., EST, Friday.

1

Español p. 20

ATTACH YOUR RECEIPT HERE

Serial Number

EB14427

Purchase Date

Lowes.com/harborbreeze

TABLE OF CONTENTS

2

Preparation ........................................................................................................................

Initial Instructions ...............................................................................................................

Wiring Instructions .............................................................................................................

Final Instruction ................................................................................................................

Operating Instructions ......................................................................................................

Care and Maintenance .....................................................................................................

Limited Lifetime Warranty .................................................................................................

Troubleshooting ................................................................................................................

Replacement Parts List ....................................................................................................

Safety Information .............................................................................................................

Package Contents .............................................................................................................

Hardware Contents ............................................................................................................

4

3

4

5

6

9

10

16

17

17

18

19

Lowes.com/harborbreeze

PACKAGE CONTENTS

3

A 1

1

1

6

6

2

2

1

1

1

1

1

B

C

D

F

G

Mounting Bracket

Downrod Assembly

Canopy

Top Housing

(Preassembled on

Motor Body (G))

Motor Body

Canopy Cover

E Coupling Cover

QUNTITYDESCRIPTIONPART

H

I

Blade Iron

Blade

J Fan Switch Cover

K

Fan Finial

L

Light Kit

Lowes.com/harborbreeze

2M Bulb

1

1

N

O

P

Glass Shade

Light Finial Cap

Light Finial

1

2

Q

Switch Housing

(preassembled on Motor Body (G))

1R

Bottom Housing

(preassembled on Motor Body (G))

T 1Balance Kit

U 1

Clevin Pin

(preassembled on Motor Body (G))

V

1

Hairpin Clip

(preassembled on Motor Body (G))

S 1Light Switch Cover

QUNTITYDESCRIPTIONPART

A

B

C

D

E

T

S

K

J

Q

V

U

F

G

R

L

M

N

H

I

P

O

4

HARDWARE CONTENTS (Not shown actual size)

Lowes.com/harborbreeze

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, operate or install the product.

. All electrical connections must comply with local codes, ordinances or the National Electric Code (NEC).
Contact your municipal building department to inquire about your local codes, permits and/or inspections.

. Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse
or by removing th fuse or by switching off circuit breaker.

. Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
Never use a fixture in a two-wire system that is not grounded.

. If you are not sure your lighting system has a grounding means, do not attempt to install this fixture. Contact
a qualified, licensed electrician for information regarding proper grounding methods as required by the local
electrical code in your area.

. Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the floor
and at least 30 in. from the ends of the blades to any obstruction.

. If a dimmer control switch is used with this fixture, obtain professional advice to determine the correct type
and electrical rating required.

. The lighting fixture must be positioned so there is at least 1.64 ft. between the bulb and any illuminated
surface.

. For supply connections, if the conductor of a fan is identified as a grounded conductor, then it should be
connected to a grounded conductor power supply. If the conductor of a fan is identified as an ungrounded
conductor, then it should be connected to an ungrounded conductor power supply. If the conductor of a fan
is identified for equipment grounding, then it should be connected to an equipment-grounding conductor.

. Installing a fixture into an electrical system without a proper grounding means could allow metal parts of the
fixture to carry electrical currents. If any of the fixture wires, wire connections or splices are broken, cut or
loose during the mounting or normal operation of the fixture, under such conditon, anyone coming in contact
with the fixture is subject to electrical shock, which could cause serious injury or death.

. Connection of the bare or green fixture ground wire to the black or white house wires may allow metal parts
of the fixture to carry electrical currents. Under this condition anyone coming in contact with the fixture will
receive electrical shock, which could cause serious injury or death.

. Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires
to have contact with any surface having a sharp edge. Doing so may damage or cut the wire insulation,
which could cause serious injury or death from electric shock.

DANGER

AA

CC DD

Wire Nut
Qty. 4

Blade Screw
Qty. 18 + 1 Extra

Motor Screw

Qty. 7 + 6 Extra

Fob

Qty. 2

BB

WARNING

CAUTION

PREPARATION

. Risk of fire. Most dwellings built before 1985 have supply wire rated for 140°F. Consult a qualified
electrician before installation.

. To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed device
or variable speed control.

. To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets,
balancing or cleaning the fan.

. Do not insert foreign objects in between rotating fan blades.

. Do not install or use the fan if any part is damaged or missing.

. Before servicing or cleaning the unit, switch power off at the service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag,
to the service panel.

. Do not use bulbs having a wattage greater than the maximum value stated on the fixture and in this
manual. Using a higher wattage bulb than specified will increase fixture temperature and increase
risk of fire.

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.

. To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked
'ACCEPTABLE FOR FAN SUPPORT OF 35 LBS OR LESS' and use mounting screws provided
with the outlet box and/or support directly from building structure. Most outlet boxes commonly
used for the support of luminaries are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.

Estimated Assembly Time: 45 minutes

Tools Required for Assembly (not included): Philips Screwdriver, Step Ladder, Tape, Pliers and Wire
Cutters.

5

Lowes.com/harborbreeze

1

6

INITIAL INSTRUCTIONS

1. Turn off circuit breakers and wall switch to the fan supply
line leads.

Lowes.com/harborbreeze

2b. It is required at least 30 inch from blade tip to nearest
wall or obstruction. Check downrod length to ensure 7
feet from bottom edge of blade to the floor.

A. Standard Mounting: Standard mounting is best
suited for ceilings 8 ft. or higher. For taller ceilings you
may want to use a longer downrod (not included).

B. Angle Mounting: Angle-style mounting is best
suited for angled or vaulted ceilings. A longer downrod
is sometimes necessary to ensure proper blade
clearance. If using the angle mount, make sure the
ceiling angle is not steeper than 20°.

2a. Choose the desired mounting method:

Note: Flushmount and closemount options are not
available for this item.

DANGER: Failure to disconnect power supply prior to
installation may result in serious injury or death.

A

B

2a

7 ft. MIN.

30 IN. MIN.

2b