Harbor Breeze CPW1413 User Manual

LAKE CYPRESS CEILING FAN

ITEM #0747615

MODE

#CPW1413

Español p. 20

Serial Number

Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.

AB15776

ATTACH YOUR RECEIPT HERE

Lowes.com/harborbreeze

Harbor Breeze

is a registered trademark

TABLE OF CONTENTS

Package Contents...............................................................................................................

Hardware Contents.............................................................................................................

Safety Information...............................................................................................................

Preparation .........................................................................................................................

Initial Installation Instructions...............................................................................................

Wiring Instructions................................................................................................................

Final Installation Instructions................................................................................................

Operating Instructions..........................................................................................................

Care and Maintenance .......................................................................................................

Troubleshooting...................................................................................................................

Limited Lifetime Warranty....................................................................................................

Replacement Parts List ......................................................................................................

Lowes.com/harborbreeze

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Mounting Bracket 1 B Downrod Assembly 1 C Canopy 1

Canopy Cover (preassembled on Canopy (C))

E Coupling Cover 1 F Motor Housing 1

Blade Holder

H Blade 5

I Switch Housing 1

PART DESCRIPTION QUANTITY

Light Kit 1

K Glass Assembly

1 L Bulb 3 M

Power Kit

1 N Balance Kit 1

Clevis Pin (preassembled on Motor Housing (F))

Lowes.com/harborbreeze

Hairpin Clip (preassembled on Motor Housing (F))

Coupling Screw (preassembled on Motor Housing (F))

ONDIP

4321

HARDWARE CONTENTS

AA BB

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, operate or install the product.

All electrical connections must comply with local codes, ordinances or the National Electric Code (NEC). Contact your municipal building department to inquire about your local codes, permits and/or inspections.

Turn off electricity at the main fuse box (or circuit breaker box) before beginning installation by

removing the fuse or by switching off the circuit breaker. Do not connect this

to an electrical system that does not provide a means for equipment

grounding. Never use a

in a two-wire system that is not grounded.

If you are not sure your lighting system has a grounding means, do not attempt to install this Contact a

licensed electrician for information regarding proper grounding methods as

required by the local electrical code in your area. Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the

and at least 30 in. from the ends of the blades to any obstruction.

Secure the outlet box directly to the building structure. The outlet box and its support must be able to support the moving weight of the fan (at least 35 Ibs.).

If a dimmer control switch is used with this

obtain professional advice to determine the correct

type and electrical rating required. The lighting

must be positioned so there is at least 1.64 ft. between the bulb and any illuminated

surface. For supply connections, if the conductor of a fan is

as a grounded conductor, then it should

be connected to a grounded conductor power supply. If the conductor of a fan is

as an ungrounded conductor, then it should be connected to an ungrounded conductor power supply. If the conductor of a fan is

for equipment grounding, then it should be connected to an equipment-

grounding conductor.

All

must be mounted to a 4 in. x 4 in. x 2-1/8 in. deep metal outlet box that is supported by

the building structure. Do not attempt to support the

by ceiling board alone. The ceiling board

alone does not have the strength to support the weight of the

The could fall and cause

personal injury. Do not use bulbs having a wattage greater than the maximum value stated on the

and in this

manual. Using a higher wattage bulb than

will increase temperature and increase

risk of

CAUTION

Lowes.com/harborbreeze

Blade Screw

Qty. 15 + 1 Extra

Motor Screw Qty. 10 (5 preassembled) + 1 Extra

WARNING

DANGER

 Risk of Most dwellings built before 1985 have supply wire rated for 140°F. Consult a

elec

trician before installation.

 Wire connectors will not support the weight of a

suspending a by the house wires and

wire connectors will result in the

falling, with the possibility of personal injury and the danger

of electrical shock or



To reduce the risk of

or electric shock, do not use this fan with any solid state fan speed device or

variable speed control.

 To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets,

balancing or cleaning the fan.

 Do not insert foreign objects in between rotating fan blades.  Do not install or use the fan if any part is damaged or missing.  To reduce the risk of

electrical shock or personal injury, mount to outlet box marked “ACCEPTABLE FOR FAN SUPPORT OF 35 LBS OR LESS” and use mounting screws provided with the outlet box and/or support directly from building structure. Most outlet boxes commonly used for the support of luminaries are not acceptable for fan support and may need to be replaced. Consult a electrician if in doubt.



Before servicing or cleaning the unit, switch power off at the service panel and lock the service

disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

 Installing a

into an electrical system without a proper grounding means could allow metal parts

of the

to carry electrical currents. If any of the wires, wire connections or splices are

broken, cut or loose during the mounting or normal operation of the

under such condition,

anyone coming in contact with the

is subject to electrical shock, which could cause serious

injury or death.

 Connection of the bare or green

ground wire to the black or white house wires may allow metal

parts of the

to carry electrical currents. Under this condition anyone coming in contact with the

will receive electrical shock, which could cause serious injury or death.

 Be careful not to damage or cut the wire insulation (covering) during

installation. Do not permit wires to have contact with any surface having a sharp edge. Doing so may damage or cut the wire insulation, which could cause serious injury or death from electric shock.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 45 minutes

Tools Required for Assembly (not included): Philips Screwdriver, Step Ladder, Tape, Pliers and Wire Cutters.

Lowes.com/harborbreeze

INITIAL INSTALLATION INSTRUCTIONS

1. Turn off circuit breakers and wall switch to the fan supply line leads.

Choose the desired mounting method:

3. Check existing outlet box (not included) to ensure it is securely fastened to at least two points in a structural ceiling member and can support the full weight of

)A( tekcarb gnitnuom llatsni ,deifirev ecnO .naf eht

to the outlet box using the screws and washers provided with the outlet box.

Note: If using the angle mount, make sure open end of mounting bracket (A) points toward the ceiling.

DANGER:

Failure to disconnect power supply prior to installation may result in serious injury or death.

DANGER: A loose outlet box can cause the fan to wobble and increase the fan’s potential to fall, which could result in serious injury or death.

A. Standard Mounting:

Standard mounting is best suited for ceilings 8 feet. or higher. For taller ceilings you may want to use a longer downrod (not included).

B.C.

Angle Mounting:

Angle-style mounting is best suited for angled or vaulted ceilings. A longer downrod is sometimes necessary to ensure proper blade clearance. If using the angle mount, make sure the ceiling angle is not steeper than 20°.

Flush Mounting:

Flushmount installation is used for ceilings less than 8 feet high.

Lowes.com/harborbreeze

Standard/Flush Mounting

Angle

Mounting

For ALL mounting options, there must be at least 30 inches from the blade tip to nearest wall. Also, ensure there is 7 feet from the bottom edge of the blade to the floor.

Turn Off Power Source

+ 13 hidden pages

Harbor Breeze CPW1413 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual