Harbor Breeze CC52WW5C Installation Manual

ITEM #0020776

ARMITAGE CEILING FAN

MODEL #CC52WW5C

Harbor Breeze® is a registered trademark of
LF, LLC. All Rights Reserved.

Español p. 18

ATTACH YOUR RECEIPT HERE
Serial Number

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -

5 p.m., EST, Friday.

EB15412

4010239

Purchase Date

Lowes.com/harborbreeze

1

TABLE OF CONTENTS

Safety Information ...............................................................................................................2

Package Contents ...............................................................................................................4

Hardware Contents

..........................................................................................................................

5

Preparation ..........................................................................................................................5

Initial Installation ..................................................................................................................6

Wiring ..................................................................................................................................8

Final Installation ................................................................................................................10

Operating Instructions .......................................................................................................12

Care and Maintenance ......................................................................................................14

Troubleshooting..................................................................................................................15

Limited Lifetime Warranty ..................................................................................................16

Replacement Parts List .....................................................................................................17

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, install or operate the
product.

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for
repairs, it must be shipped in its original packaging to ensure proper protection against damage that
might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring
handbook, available at Lowe's, if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the

floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure all connections are secure to prevent the fan from falling.

• The net weight of this fan including the light kit is: 14.11 lbs.

Lowes.com/harborbreeze

2

SAFETY INFORMATION

DANGER

When using an existing outlet box, make sure the outlet box is securely attached to the building
structure and can support the full weight of the fan. Failure to do this can result in serious injury or
death. The stability of the outlet box is essential in minimizing wobble and noise in the fan after

installation is complete.

WARNING

To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box
marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. (15.9 KG) OR LESS" and use
mounting screws provided with the outlet box. Most outlet boxes commonly used for the
support of lighting fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box; do NOT use a
plastic outlet box. Secure the outlet box directly to the building structure. The outlet box and its
support must be able to support the moving weight of the fan (at least 35 lbs.).

To avoid personal injury, the use of gloves may be necessary while handling fan parts with
sharp edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan
are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your
house wire is larger than 12-gauge or there is more than one house wire to connect to the
corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control
device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock or personal injury, do not bend the blade arms when
installing them, balancing the blades or cleaning the fan. Do not insert objects between the
rotating fan blades.

To reduce the risk of personal injury, use ONLY parts provided with this fan. The use of parts
OTHER than those provided with this fan will void the warranty.

Before installation, be sure to shut off electricity at main switch or circuit breaker in order to avoid
electrical shock.

CAUTION

Be sure outlet box is properly grounded and that a ground wire (green or bare) is present.

Before beginning installation, carefully check all screws, bolts and nuts on fan motor assembly to
ensure they are secure.

Lowes.com/harborbreeze

3

PACKAGE CONTENTS

D

A

J

K

E

N

O

I

B

DESCRIPTIONPART

A

Mounting Bracket 1

B

Shade Fitter Plate

C

Motor Housing

QUANTITY

1
1

D Motor Assembly 1

E
F
G

H
I
J

Glass Shade
Blade Arm
Blade 5
Pull Chain Extension
Bulb
Mounting Bracket Flat 4

1
5

2
1

Washer (preassembled)

IMPORTANT REMINDER: You must use the
parts provided with this fan for proper installation
and safety.

F

G

L

M

C

P

H

Q

K

DESCRIPTIONPART

Mounting Bracket Nut 4

QUANTITY

(preassembled)
L Lock Washer 10

(preassembled) + 1 extra
M Motor Screw 10

(preassembled) + 1 extra

N Motor Housing Mounting 4
Screw (preassembled)

O

Motor Housing Lock

Washer
P

Q

Shade Fitter Plate Screw
(preassembled)

Shade Fitter Plate Washer
(preassembled)

(preassembled)

4

3

3

Lowes.com/harborbreeze

4

HARDWARE CONTENTS (shown actual size)

AA

Blade
Screw

Qty. 15

+ 1 extra

PREPARATION

BB CC

Fiber
Blade
Washer

E3 Wire
Connector

Qty. 15

+ 1 extra

Qty. 4

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety
Glasses, Stepladder and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself-Wiring Handbook and

Wire Cutters

Lowes.com/harborbreeze

5

INITIAL INSTALLATION

1.

Turn off circuit breakers and wall switch to the fan
supply line leads.

DANGER: Failure to disconnect power supply
prior to installation may result in serious injury or
death.

This fan can be mounted as a flushmount on a

2.
regular (no-slope) ceiling only.

1

2

ON

OFF

ON

OFF

Check to make sure blades (G) will be at least
30 inches from any obstruction and at least 7 ft.
above the floor.

3.

Remove all mounting bracket nuts (K) and
mounting bracket flat washers (J) from mounting
bracket (A).

30 in.

min.

G

7 ft.

min.

3

A

K

J

C

Lowes.com/harborbreeze

6

INITIAL INSTALLATION

4.

Secure mounting bracket (A) to outlet box using
screws, spring washers, and flat washers
provided with the outlet box.

*Note: It is very important that you use the

proper hardware when installing the mounting
bracket (A) as this will support the fan.

5.

Remove motor screws (M) and lock washers
(L) from underside of motor -- save motor

screws (M) and lock washers (L) to attach
blade arms (F) later on. If there are also

plastic motor blocks, discard them at this
time.

4

3

5

3

A

Motor

6.

Slide the slot in the bar at the top of the motor
assembly (D) onto the "J" hook on the mounting
bracket (A) to support the fan during wiring.

IMPORTANT: Do not use the end of the bar on
the motor assembly (D) with the small round hole
to hang the motor assembly (D) on the mounting
bracket (A).

D

6

3

3

"J" Hook

Bar

D

L

M

A

Lowes.com/harborbreeze

7

WIRING

BLAC

GRO

U

N

D/G

N

BLUE

WHITE

N

GRO

UND/GREE

W

BLAC

K

GRO

U

N

D/G

)

N

BLACK

BLU

WHITE

FRO

N

EE

WARNING: To reduce the risk of fire, electrical shock, or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires
from the fan. If your house wire is larger than 12-gauge or there is more than one house wire to
connect to the corresponding fan lead wires, consult an electrician for the proper size wire
connectors to use.

CAUTION: Be sure outlet box is properly grounded and that a ground (green or bare) wire is
present.

WARNING: If house wires are different colors than referred to in the following steps, stop
immediately. A professional electrician is recommended to determine wiring.

1.

Choose wiring diagram (Fig. 1a, Fig. 1b or Fig. 1c)
that fits your situation and make appropriate wiring
connections as follows: [IMPORTANT: For each
wire connection below, use one of the wire
connectors (CC) provided, making sure to screw
wire connector (CC) on in a clockwise direction.]

1a. FAN AND LIGHT CONTROLLED BY PULL
CHAINS: Connect BLACK and BLUE wire from
fan to BLACK wire from ceiling. Connect WHITE
wire from fan to WHITE wire from ceiling. Connect
all GROUND (GREEN) wires together from fan
(on motor assembly (D) and mounting bracket (A))
to BARE/GREEN wire from ceiling. (Fig. 1A)

1b. FAN CONTROLLED BY PULL CHAIN, LIGHT
BY WALL SWITCH: If you intend to control the fan
light with a separate wall switch, connect BLACK
wire from fan to BLACK wire from ceiling. Connect
BLUE wire from fan to the BLACK wire from the
independent wall switch for the light. Connect
WHITE wire from fan to WHITE wire from ceiling.
Connect all GROUND (GREEN) wires together
from fan (on motor assembly (D) and mounting
bracket (A)) to BARE/GREEN wire from ceiling.
(Fig. 1B)

FAN AND LIGHT CONTROLLED BY PULL CHAINS

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

1a

120 V Power
from ceiling

FAN CONTROLLED BY PULL CHAIN, LIGHT BY WALL SWITCH

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

1b

120 V Power
from ceiling

K

BLACK
WHITE

WHITE
GROUND/GREEN (BARE)

REEN (BARE)

GROUND/GREEN

HITE

WHITE

WHITE

FROM FA

FROM FAN

BLACK

BLUE

BLACK

BLACK (WALL SWITCH)

BLACK
WHITE

WHITE

REEN (BARE

GROUND/GREEN (BARE)

GROUND/GREEN

WHITE

WHITE
WHITE

M FA

FROM FAN

R

BLACK
BLACK

E

BLUE

BLACK (WALL SWITCH)

Lowes.com/harborbreeze

8

WIRING

N

N

1c. FAN AND LIGHT CONTROLLED BY TWO
WALL SWITCHES: If you intend to control the

fan and light with separate wall switches,
connect BLACK wire from fan to BLACK wire
from the independent wall switch for the fan.
Connect BLUE wire from fan to the BLACK wire
from the other independent wall switch for the
light. Connect WHITE wire from fan to WHITE
wire from ceiling. Connect all GROUND (GREEN)
wires together from fan (on motor assembly and
mounting bracket) to BARE/GREEN wire from
ceiling. (Fig. 1C)

Note: BLACK wire is hot power for fan. BLUE wire
is hot power for light kit. WHITE wire is common
for fan and light kit. BARE/GREEN wire is ground.

2.

Wrap electrical tape around each individual wire
connector (CC) down to the wire.

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

1c

2

3

120 V Power
from ceiling

BLACK (WALL SWITCH FOR LIGHT)

BLACK (WALL SWITCH)

WHITE

GROUND/GREEN (BARE)

WHITE
WHITE

FROM FAN

ROM FA

BLACK
BLACK

LUE

BLUE

BLACK (WALL SWITCH)

D/GREEN

REE

WARNING: Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of box
from the black and blue (if applicable) connections.

Turn spliced/taped wires upward and gently push
wires and wire connectors (CC) into outlet box.

Hardware Used

CC

3.

E3 Wire Connector x 4

IMPORTANT: Using a full range dimmer switch to
control fan speed will cause a loud humming noise
from fan. To reduce the risk of fire or electrical
shock, do NOT use a full range dimmer switch to
control fan speed.

3

3

3

CC

CC

CC

CC

3
2

1

Dimmer
Switch

Speed
Switch

For illustrative purposes only--not

intended to cover all types of controls

Lowes.com/harborbreeze

9

FINAL INSTALLATION

1.

Remove motor assembly (D) from "J" hook and lift
motor assembly (D) to mounting bracket (A). Align
holes and secure motor assembly (D) with mounting
bracket flat washers (J) and mounting bracket nuts
(K) previously removed (Step 3, page 6).

2.

Temporarily lift motor housing (C) to mounting
bracket (A) to determine which two motor housing
mounting screws (N) in sides of mounting bracket
(A) align with the slotted holes in the top edge of
the motor housing (C) and partially loosen these
two motor housing mounting screws (N). Remove
the other two motor housing mounting screws (N)
and motor housing lock washers (O) from sides of
mounting bracket (A). Slide motor housing (C) over
motor assembly (D), aligning slotted holes in motor
housing (C) with loosened motor housing mounting
screws (N) in mounting bracket (A). Twist motor
housing (C) to lock. Re-insert the other two motor
housing mounting screws (N), along with motor
housing lock washers (O), to secure motor housing
(C). Tighten all motor housing mounting screws (N)
securely.

1

2

A

J

K

D

A

D

N

C

O

Partially insert three blade screws (AA) along with

3.
three fiber blade washers (BB) into holes on
blade arm (F) and blade (G) to attach blade arm
(F) to blade (G). Then, tighten each blade screw
(AA) starting with the one in the middle. Repeat
with remaining blades (G).

Hardware Used

AA

BB

Blade Screw x 15

Fiber Blade Washer x 15

10

3

3

AA

BB

HH

F

Lowes.com/harborbreeze

G

FINAL INSTALLATION

Locate motor screws (M) and lock washers (L)

4.
removed in Step 5 on page 7.

Insert two motor screws (M) along with lock
washers (L) through one blade arm (F) to attach
blade arm (F) to motor. Tighten motor screws (M)
securely. Repeat with remaining blade arms (F)
making sure to completely secure each blade arm
(F) before proceeding with the next.

5.

Remove three shade fitter plate screws (P) and
shade fitter plate washers (Q) from center of
shade fitter plate (B). Align notch in shade fitter
plate (B) with small protrusion on the inside of the
light kit plate. Secure shade fitter plate (B) with the
three shade fitter plate screws (P) and shade fitter
plate washers (Q) that were just removed.

4

3

5

3

C

F

F

D

HH

L

M

M

C

P

In order to have access to pull chains later on,
thread fan and light pull chains through
corresponding holes on the outer rim of the
shade fitter plate (B).

6.

Install bulb (I).
IMPORTANT: When you need to replace the

bulb, please allow the bulb and glass shade (E) to
cool down before touching the bulb or the glass
shade (E).

Q

Pull Chain

Hole

6

3

B

Pull Chain

Hole

B

C

I

Lowes.com/harborbreeze

11