Serial Number _________________________ Purchase Date _________________________
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5
p.m., EST, Friday.
Switch Housing Plate (preassembled to the Motor Assembly (E))
1
3
Lowes.com/harborbreeze
CC
DD
EE
GG
FF
HH
II
JJ
HARDWARE CONTENTS
AA BB
Motor Screw Wire Pull Chain Downrod Clip Downrod Pin Qty. 10 Connector Extension Qty. 1 Qty. 1 (preassembled to Qty. 3 + 1 extra Qty. 1 (preassembled to (preassembled to
Motor Assembly (E)) Downrod (A)) Downrod (A))
+ 1 extra
Motor Housing Set Closemount Mounting Bracket Blade Screw Blade Washer
Screw Screw Screw Qty. 15 + 1 extra Qty. 15 + 1 extra Qty. 2 Qty. 3 Qty. 4 (preassembled to (preassembled to (preassembled to
Lowes.com/harborbreeze
4
Spring Washer
Qty. 10
(preassembled to
Motor Screw (AA))
+ 1 extra
Rubber Washer
Qty. 15 + 1 extra
Switch Housing
Plate Screw
Qty. 3
(preassembled to
Switch Housing
Plate (K))
Switch Housing
Screw
Qty. 3
(preassembled to
the Fitter Plate (I))
KK
LL
MM
NN
Motor Motor Mounting Bracket Assembly (E)) Assembly (E)) (C))
Lowes.com/harborbreeze
5
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
• Before you begin installing the fan, disconnect the power by removing fuses or turning off the
circuit breakers.
• Make sure that all electrical connections comply with local codes, ordinances, the National
Electrical Code, and ANSI/NFPA 70-199. Hire a qualified electrician or
consult a do-it-yourself wiring handbook if you are unfamiliar with installing electrical
wiring.
• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to
the floor and at least 30 in. from the end of the blades to any
obstruction.
• The net weight of this fan is: 16.23 lbs.
DANGER: When using an existing outlet box, make sure the outlet box is securely attached to
the building structure and can support the full weight of the fan. Failure to do this can result in serious
injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan
after installation is complete.
DANGER: If using the fan in a wet location, the fan must be connected to a supply circuit that is
protected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury, electrical
shock or death.
WARNING: To avoid personal injury, the use of gloves may be necessary while handling fan
parts with sharp edges.
WARNING: To reduce the risk of fire, electric shock, orpersonal injury, mount the fan to an outlet box marked “ACCEPTABLE FOR FAN SUPPORT” and use the mounting screws provided with the outlet box. Most outlet boxescommonly used for the support of lighting fixtures are not
acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt. Secure the outlet
box directly to the building structure. The outlet box and its support must be able to support the
moving weight of the fan (at least 35 lbs.). Do NOT use a plastic outlet box.
WARNING: To reduce the risk of fire, electrical shock, orpersonal injury, wire connectors provided with this fan are designed to accept only one
12-gauge house wire and two lead wires from the fan. If your house wire is larger than 12 gauges or
there is more than one house wire to connect to the two fan lead wires, consult an electrician for the
proper size wire connectors to use.
Lowes.com/harborbreeze
6
SAFETY INFORMATION
WARNING: To reduce the risk of fire or electric shock, do
not use the fan with any solid-state speed-control device or control the fan
speed with a full-range dimmer switch.
WARNING: To reduce the risk of fire, electric shock, orpersonal injury, do not bend the blade arms when installing them, balancing
the blades, or cleaning the fan. Do not insert objects between the rotating fan blades.
WARNING: To reduce the risk of personal injury, use only parts provided with this fan. The use
of parts OTHER than those provided with this fan will void the warranty.
CAUTION: Read all instructions and safety information before installing your new fan. Review the
accompanying assembly diagrams.
CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is
present.
CAUTION: Carefully check all screws, bolts, and nuts on the fan motor assembly to ensure that they
are secured.
PREPARATION
Before beginning the assembly of this product, ensure all parts are present. Compare all parts with
the package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
After opening the top of the carton, remove the mounting hardware package from the foam inserts,
then remove the motor from the packaging and place it on a soft surface, such as a carpet, to avoid
damage to the finish.
Estimated Assembly Time: 120 minutes
Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety
Glasses, Step Ladder and Wire Strippers
Helpful Tools (not included): AC Tester Light, Tape Measure, Wiring Handbook and Wire Cutters
INITIAL INSTALLATION
Lowes.com/harborbreeze
7
1
2
3
Downrod Mounting
Flushmount
Closemount
Angle Mounting
1. Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER: Failure to disconnect the power supply
prior to installation may result in serious injury or death.
2. Determine the
mounting method to use.
Note:Flushmount installation is not
available for this item.
Important: If using the angle mount, check to
ensure the ceiling angle is not
steeper than 23°.
Lowes.com/harborbreeze
8
F
A
3. Ensure the blades (F) will be at least 30 in. from any
obstructions. Also check the downrod (A) length to
ensure the blades (F) will be at least 7 ft. above the
floor.
Lowes.com/harborbreeze
9
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.