Hapinnex Easy 360 FM-01 User Manual

Hapinnex Easy 360 Flat Mop

Manual

Version: 20170612

Model
FM-01

1x Handle(come in 3 parts: top rod, bottom rod, head base)

2x Scrapers(included in the head base)

4x Microfiber pads

To assemble the mop, tightly screw together the three part handle
as illustrated.

1. Insert the bottom rod into the connector sleeve and twist tight.

2. Loosen the screw cap and insert the bottom rod into the head
base completely, then tighten the screw cap.

3. Place the microfiber mop head on the floor with the plastic ring
face up. Place the head base over the plastic ring and twist it.

4. Adjust handle length by loosening the locking ring and
extending or collapsing the handle.

Installation

Assembling the mop handle:

Package includes:

1

2

3 4