HANYOUNG NUX HSR-3SL, HSR-3SLD152Z, HSR-3SLD252Z, HSR-3SLD154Z, HSR-3SLD402Z Instruction Manual
...
Safety information
Do not touch or contact the input/output terminals because they may cause electric shock.
• Before you use, read safety precautions carefully, and use this product properly.
•
Do not touch or contact the input/output terminals because they may cause electric shock.
• If you are concerned about serious accident due to the malfunction of products,
please install the external safety equipment
• To prevent defection or malfunction of this product, supply proper power voltage in
accordance with the rating.
• To prevent electric shock or devise malfunction of this product, do not supply the
power until the wiring is completed.
• Reassemble this product while the power is off. Otherwise, it may cause malfunction
or electric shock.
• If the user use the product with methods other than specified by the manufacturer,
there may be bodily injuries or property damages.
• Due to the danger of electric shock, use this product installed onto a panel while an
electric current is applied.
• Before using the product you have purchased, check to make sure that it is exactly
what you ordered.
• Do not use this product at any place with corrosive
(especially noxious gas or ammonia) or flammable gas.
• Do not use this product at any place with liquid, oil, medical substances, dust, salt or
iron contents.
• Do not use this product at any place with excessive induction trouble, static electricity
or magnetic noise.
• Do not use this product at any place with possible thermal accumulation due to direct
sunlight or heat radiation.
• When the product gets wet, the inspection is essential because there is danger of an
electric leakage or fire.
• Do not connect anything to the unused terminals.
• For DC types, connect wires at the correct position after checking polarity of terminal.
• The rated heat sink must be used otherwise, the product may be destroyed.
• When product is disposed, treat as a industrial waste.
• Since a heat sink corner is sharp, it would lead to a serious injury.
when electricity flows, desktop or heat sink temperature would be high so that it
could lead people to suffer burns.
•This model has epoxy molding for the purpose of safety, reliability and extends of the life.
•When it is out of order, please separate SSR from head sink and only change SSR.
• When applying an electric current, SSR is heated more and more. So, it has more durable
at low
heat sink
temperature and ambient temperature.
DANGER
WARNING
CAUTION
Suffix code
Model Code Information
HSR-3SL Slim Type 3-Phase Solid State Relay
Input Operating Voltage
D 4 - 32 V DC
Rated load current
15 15 A
25 25 A
40 40 A
Rated load voltage
2 90 - 264 V AC (Low voltage)
4 90 - 480 V AC (High voltage)
Operation method
(Switching Mode)
Z Zero Cross Switching (Standard product)
R Random Switching
Specification
Dimension
Model
Low HSR-3SLD152Z HSR-3SLD252Z HSR-3SLD402Z
High HSR-3SLD154Z HSR-3SLD254Z HSR-3SLD404Z
Load
Rated Load
Voltage
Low 90 - 264 V AC
High 90 - 480 V AC
Peak Voltage
(Non-repetition)
Low 600 V
High 800 V 1,200 V
Rated load current
15 A 25 A 40 A
Frequency 50/60 ㎐ (Dual usage)
Surge current
(8.3 ms No repetition)
Low 170 A 260 A 420 A
High 170 A 250 A 370 A
Leakage current 20 ㎃ max
Output ON voltage dropping
1.6 V (R.M.S) max
Input
Rated Voltage 5 - 24 V DC
Operating Voltage Range
4 - 32 V DC
Impedance Less than 4 ㏀
Operation Voltage More than 3 V DC
Reset Voltage Less than 1.5 V DC
Input Current Constant-current system : 10 ㎃ (±3)
Response Time 1/2 Cycle + 1 ms max. (“R”type below 1 ms)
Insulating Resistance 500 V DC, 100 ㏁ (Between the input / output and case)
Dielectric strength 3,000 V AC (For 1 min at 60 ㎐)
Vibration resistance
10 - 55 ㎐, Double amplitude : 1.5 ㎜, X,Y, and Z direction for 2 hours
Shock resistance 1,000 ㎨, X,Y,Z each axis 3 times
Storage Temperature -30 ~ 90 ℃
Ambient Temperature 0 ~ 25 ℃ (But without frostiness)
Ambient Humidity 45 ~ 85 % R.H.
Weight Approx. 1,000 g Approx. 1,300 g
[Unit : mm]
※ Weight included the weight of box
▒ 15 A, 25 A
▒ 40 A
MC0601KE140227
28, Gilpa-ro 71beon-gil, Nam-gu, Incheon, Korea
TEL : (82-32)876-4697 FAX : (82-32)876-4696
http://www.hynux.com
HANYOUNGNUX CO.,LTD
HEAD OFFICE
JL.CEMPAKA BLOK F 16 NO.02 DELTA SILICON II INDUSTRIAL PARK
LIPPO CIKARANG CICAU, CIKARANG PUSAT, BEKASI INDONESIA 17550
TEL : 62-21-8911-8120~4 FAX : 62-21-8911-8126
PT. HANYOUNG ELECTRONIC INDONESIA
INDONESIA
FACTORY
Slim Type
HSR-3SL
3-Phase Solid State Relay
Thank you for purchasing HANYOUNG product.
Please check whether the product is the exactly same as you ordered.
Before using the product, please read this instruction manual carefully.
Please keep this manual where you can view at any time
INSTRUCTION MANUAL
DANGER indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury
WARNING indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury
CAUTION indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury
DANGER
WARNING
CAUTION
Before using the product, please read the safety information thoroughly and use it properly.
Alerts declared in the manual are classified to Danger, Warning and Caution by their criticality
● HSR-3SL 외형 및 패널 가공치수 (단위:mm)
- 15A,25A
96.6
87.6
4.5
20.5
10.0
(43.1)
44.5
79.0
4.5
6.5
13.8
120
74
● HSR-3SL 외형 및 패널 가공치수 (단위:mm)
- 15A,25A
- 40A -
96.6
87.6
4.5
20.5
10.0
(43.1)
44.5
79.0
4.5
6.5
13.8
146
74.0
120
74
96.6
87.6
4.5
20.5
10.0
(43.1)
44.5
95.0
4.5
6.5
13.8
5
10
20
30
40
0
5
10
15
20
25
30
Input voltage(V)
Input current (㎃)
0
50
100
150
200
250
300
350
400
10
100
1
1000
HSR-3SLD40
HSR-3SLD15
HSR-3SLD25
Number of Cycle (60 Hz)
5
10
15
20
25
30
Input voltage(V)
Surge current (A)
Equivalent Circuit How to install
Installation intervals
Connection
Input/Surge current Characteristics
C1
+
C2
-
T
W
S
V
R
U
Input Circuit
+
-
Load voltage
Input voltage
4 - 32 V DC
FUSE
LOAD
•Please install SSR in the vertical direction.
•Otherwise, production performance may be reduced to less than 50 %.
•When installing DIN rail, please install it stably since the product is heavy.
• The width of the load output terminal is 10.6 ㎜ and Input terminal is 6.8 ㎜ so please use
terminal that has less than size of them.
•Please make intervals more than following picture.
• Please install wiring duct less than half the height of the heat sink to prevent obstruction the
flow of air.
• The optimal performance of our SSR is in the ambient temperature by 25 ℃ so please use
it lower than 25 ℃
vertical direction
Horizontality direction
Wiring duct
Wiring duct
FAN
Inlet
Over 60 ㎜
Over 30 ㎜
Over 10 ㎜
L1 (R) L2 (S) L 3 (T)
T1 (U)T2 (V) T3 (W)
+C1
-C2
SOLID STATE RELAY
MADE IN KOREA
LOAD : 90 - 264 V~
15 A
INPUT : 4 - 32 V 12
mA
HSR-3SLD152Z
INPUT
L1 (R) L2 (S) L 3 (T)
T1 (U)T2 (V) T3 (W)
+C1
-C2
SOLID STATE RELAY
MADE IN KOREA
LOAD : 90 - 264 V~
15 A
INPUT : 4 - 32 V 12
mA
HSR-3SLD152Z
INPUT
L1 (R) L2 (S) L 3 (T)
T1 (U)T2 (V) T3 (W)
+C1
-C2
SOLID STATE RELAY
MADE IN KOREA
LOAD : 90 - 264 V~
15 A
INPUT : 4 - 32 V 12
mA
HSR-3SLD152Z
INPUT
L1 (R) L2 (S) L 3 (T)
T1 (U)T2 (V) T3 (W)
+C1
-C2
SOLID STATE RELAY
MADE IN KOREA
LOAD : 90 - 264 V~
15 A
INPUT : 4 - 32 V 12
mA
HSR-3SLD152Z
INPUT
Over 10 ㎜
▒ Input current Characteristics
▒ Surge current Characteristics
L1 ( R)
10.6
mm
+C1
6.8
mm
Loading...