Hanwha Techwin DIGIMAXS500 Users Manual

ŝ40Ş

Delete ( ) button Printer button

ƈ If you selectd [Computer] sub menu in the [USB]

setup menu, [Connecting Computer] message will
display when you connect the camera to your
printer and the conncection will not be established.
In this case, press the Printer button. [Connecting
Printer] message will display and the Easy printing
mode will be selected.

* In some instances the camera may not connect to the printer, this will depend on

the make of the printer.

- After the connection, the Easy printing menu
will display on the LCD monitor.
To display the PictBridge menu, press the
Menu button. For more information about the
PictBridge menu, refer to page 49.

ƈThis deletes images stored on the memory.

ƃDeleting Images in Play Mode

1. Select an image that you want to delete by
pressing the LEFT / RIGHT button and press the
DELETE( ) button.

2. A message will display as shown alongside on
the LCD monitor.

3. Select the submenu values by pressing
the LEFT / RIGHT button and then press
the OK button.
If [Yes] is selected : deletes the selected images.
If [No] is selected : cancels "Delete Image".

ƃBefore deleting images from the camera, you should protect or download

images to your computer that you wish to keep.

INFORMATION

ƃDeleting Images in Thumbnail Display Mode

1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want
to delete, and then press the DELETE ( ) button.

2. The following message will be displayed on the LCD monitor.

3. Select the submenu values by pressing the LEFT / RIGHT button and then
press the OK button.
If [Yes] is selected : deletes the selected images.
If [No] is selected : cancels "Delete Image".

Delete?

Yes No

Confirm:OK

Delete?

Yes No

Confirm:OK

Press the

delete button.

IMAGES

One Pic
All Pics

Exit:MENU Move:




ŝ41Ş

ƈ PLAY mode functions can be changed by using the LCD monitor. In the PLAY

mode, pressing the MENU button displays the menu on the LCD monitor. The
menus you can set up in Play mode are as follows. To capture an image after
setting up the play menu, press the PLAY mode button or shutter button.

Menu tab Main menu Sub menu Secondary menu Page

Show Play / Repeat Play

Interval 1, 3, 5, 10 sec

OFF

Select

All Pics

Select -

All Pics -

2272 X 1704 -

2048 X 1536 -

1600 X 1200 -

1024 X 768 -

640 X 480 -

User Image 1, 2 -

SLIDE

PROTECT

DELETE

RESIZE

p.43~44

p.44

p.45

p.45

Effect

Unlock / Lock

Left / Right / Menu / OK button

Setting up the play back function using the LCD monitor

ƈ LEFT / RIGHT/ MENU/ OK buttons activate the following.

- LEFT button : While the menu is showing, press the LEFT button to select

the menu tab to the left of the cursor. While the menu is not
showing, press the LEFT button to select the previous
image.

- RIGHT button : While the menu is showing, press the RIGHT button to select

the menu tab to the right of the cursor, or to move an
secondary menu. While the menu is not showing, press the
RIGHT button to select the next image.

- MENU button : When you press the MENU button, the play mode menu will

be displayed on the LCD monitor. Pressing it again will return
the LCD to the initial display.

- OK button : When the menu is displayed on the LCD monitor, the OK

button is used for confirming data that is changed by using
the 5 function button.

ŝ42Ş

Setting up the play back function using the LCD monitor

Menu tab Main menu Sub menu Secondary menu Page

One Pic -

All Pics -

No -

Yes -

Auto

Postcard

Card

4X6

L

2L

Letter

A4

A3

Auto

Full

1

2

4

8

9

16

Index

IMAGES

AUTO SET

CUSTOM

SET

Size

p.50

p.50

p.51

ƈ This menu is available while the camera is connected to a PictBridge supporting

printer (direct connection to the camera, sold separately) with a USB cable.

Layout

Menu tab Main menu Sub menu Secondary menu Page

Right 90º -

Left 90º -

180º -

Horizontal -

Vertical -

Standard

Select / All Pics / Cancel

DPOF Index No / Yes p.46

Size

Select / All Pics / Cancel

No -

Yes -

Full -

Basic -

OSD Off -

p.49

p.48

p.46

ROTATE

COPY TO CARD

OSD

INFORMATION

ŝ43Ş

ƃ Start the slide show : The slide show can start only in the [Show] menu.

1. Use the Up / Down buttons to select the [Show]
menu and press the Right button.

2. Select a desired sub menu by pressing the Up /
Down button.
[Play] : The slide show is closed after one

cycle.

[Repeat Play] : The slide show is repeated until

cancelled.

3. Press the OK button to save the configuration.

ƃ Setting play interval: Set the slide show play interval.

1. Select the [Interval] sub menu by pressing the UP /
DOWN button and press the RIGHT button.

2. Use the Up / Down buttons to select the desired
interval.

3. Press the OK button to save the configuration.

ƃ The loading time depends on the image size and quality.
ƃ While the slide show is playing, only the first frame of a MOVIE file is

displayed.

ƃ While the slide show is playing, the voice recording file will not display.

INFORMATION

ƈ Images can be displayed continuously at pre-set intervals.

You can view the slide show by connecting the camera to an external monitor.

1. Press the play mode button and press the menu button.

2. Press the LEFT / RIGHT button and select the [SLIDE] menu tab.

Setting up the play back function using the LCD monitor

Starting the slide show

SLIDE

Show

Interval
Effect

Back:



Set:OK

Play

Repeat Play

SLIDE

Show

Interval

Effect

Back:



Set:OK

1 sec

3 sec

5 sec

10 sec

Menu tab Main menu Sub menu Secondary menu Page

Auto

Plain

Photo

Fastphoto

Auto

Draft

Normal

Fine

Auto

Date Off

On

Auto

File name Off

On

Standard -

Index -

No -

Yes -

No -

Yes -

Type

p.51

ſ Menus are subject to change without prior notice.

Quality

CUSTOM

SET

p.51

p.52

p.52

PRINT

DPOF PRINT

RESET

ŝ44Ş

Starting the slide show Protecting images

ƈ This is used to protect specific shots from being accidentally erased (Lock).

It also unprotects images that have been previously protected (Unlock).

ƃ Protecting Images

1. Press the play mode button and press the menu
button.

2. Press the LEFT / RIGHT button and select the
[PROTECT] menu tab.

3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.

[Select ] : Selection window for an image to be

protected/released is displayed.

- Up / Down / Left / Right : Select an image

- Zoom W / T Button : Protect / release the image

- OK button : Your changes will be saved
and the menu will
disappear.

[All Pics] : Protect / release all saved images

- Zoom W / T Button : Protect / release the images

- OK button : Your changes will be saved

and the menu will disappear.

- If you protect an image, the protect icon will be

displayed on the LCD monitor. (An unprotected
image has no indicator)

- An image in LOCK mode will be protected from

the delete function or [Delete] functions, but will
NOT be protected from the [Format] function.

PROTECT

Select
All Pics

Exit:MENU Move:




Set:OK

WUnlock T

Set:OK

WUnlock T

ƃ Configure slide show effects : Unique screen effects can be used for the slide

show.

1. Select the [Effect] sub menu by pressing the
UP / DOWN button and press the RIGHT button.

2. Use the Up / Down button to select the type of
effect.

: Normal display.
: Image is displayed slowly.
: Image is displayed slowly from the centre

outwards.
: Image moves from the top left.
: The image slides diagonally from top left to

bottom right.
: The image slides irregularly.

3. Press the OK button to confirm the setting.

SLIDE

Show
Interval

Effect

Back:



Set:OK

OFF

ŝ45Ş

ƈ Change the resolution (size) of pictures taken. Select the [User Image] to save

an image to be the start-up image. The resized image will have a new file name.

1. Press the play mode button and press the menu
button.

2. Press the LEFT / RIGHT button and select the
[RESIZE] menu tab.

3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.

ƃ A large sized image can be resized to a smaller sized image, but not vice versa.
ƃ Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files

can’t be resized.

ƃ You can change the resolution of only those files compressed in the JPEG 4:2:2

format.

ƃ The resized image will have a new file name. The [User Image] image is stored

not on the memory card but on the internal memory.

ƃ Only two [User Image] images can be saved.
ƃ If the memory capacity is insufficient to store the resized image, a [Memory Full!]

message will display on the LCD monitor and the resized image will not be
stored.

ƃ Image Resize Types

5M O O O O O O
4M X O O O O O
3M X X O O O O
2M X X X O O O
1M X X X X O O

VGA X X X X X O

Resize

2272 X

1704

2048 X

1536

1600 X

1200

1024 X

768

640 X

480

User

Image

Deleting images Resize

RESIZE

Exit:MENU Move:




2272X1704
2048X1536
1600X1200

1024X768

640X480

ƈ Of all the files stored in the memory card, the unprotected files in the DCIM

subfolder will be deleted. Remember that this will permanently delete
unprotected images. Important shots should be stored on a computer before
deletion takes place. The startup image is stored in the camera's internal
memory (i.e., not on the memory card) and it will not be deleted even if you
delete all files on the memory card.

ƃ Deleting images

1. Press the play mode button and press the menu
button.

2. Press the LEFT / RIGHT button and select the
[Delete] menu tab.

3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Select] : Selection window for an image to delete

is displayed.

- Up / Down / Left / Right : Select an image

- Zoom T Button : Select the image for deletion.

( mark)

- OK Button : Press the OK Button to display

the confirmation message.
Select the [Yes] menu and press
the OK button to delete
marked images.

[All Pics] : Displays confirmation window. Select the

[Yes] menu and press the OK button to
delete all unprotected images. If there aren’t protected images, all
the images are deleted and a [No Image!] message will display.

4. After deletion, the screen will be changed to the play mode screen.

DELETE

Select
All Pics

Exit:MENU Move:




Del:OK

Select:T

Del:OK

Delete?

Yes No

Confirm:OK

ŝ46Ş

Rotating an image DPOF

ƈ You can rotate the stored images by various degrees. Once the playback of the

rotated picture is finished, it will switch back to the original state.

1. Press the play mode button and press the menu
button.

2. Press the LEFT / RIGHT button and select the
[ROTATE] menu tab.

3. Select a desired sub menu by pressing the UP /
DOWN button.

[Right 90˚] :
Rotate picture in a
clock-wise direction

[Left 90˚] :
Rotate picture in a counter­clock-wise direction

[Horizontal] :
Rotate picture horizontally

[Vertical] :
Rotate picture vertically

[180˚] :
Rotate picture 180
degrees

4. Press the OK button and the rotated image will be displayed.
If you display the rotated image on the LCD monitor, empty spaces may
appear to the left and right of the image.

ƈ DPOF(Digital Print Order Format) allows you to embed printing information on

your memory card’s MISC folder. Select the pictures to be printed and how
many prints to make.

ƈ The DPOF indicator will display on the LCD monitor when an image that has

DPOF information plays back. Images can then be printed on DPOF printers,
or at an increasing number of photo labs.

ƈ This function is not available for Movie clips and Voice recording files.

ƈ When this menu is selected without inserting a memory card, you can select

the[DPOF] menu but yhe menu can't be run.

ROTATE

Exit:MENU Move:




Right 90

?W2@@?he
?7<?@?he
?@e@?he
?3=?@?he
?V4@@?he

Left 90

?W2@@?he
?7<?@?he
?@e@?he
?3=?@?he
?V4@@?he

180

?W2@@?he
?7<?@?he
?@e@?he
?3=?@?he
?V4@@?he

Horizontal
Vertical

ŝ47Ş

DPOF : Standard DPOF : Index

ƈ This function allows you to embed print quantity information on a stored image.

1. Press the play mode button and press the menu
button.

2. Press the LEFT / RIGHT button and select the
[DPOF] menu tab.

3. Select the [Standard] menu by pressing the UP /
DOWN button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Select] : Selection window for an image to print is

displayed.

-

Up / Down / Left / Right :

Select an image to print.

- Zoom W / T Button : Select the number of prints.
[All Pics] : Configure number of prints for all

pictures except movie and voice files.

- W / T button : Select a number of prints
[Cancel] : Cancel the print setup.

5. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the DPOF
indicator ( ) will show.

ƈ Images (except for movie clips and voice file) are printed as index type.

1. Press the play mode button and press the menu
button.

2. Press the LEFT / RIGHT button and select the
[DPOF] menu tab.

3. Select the [Index] menu by pressing the UP /
DOWN button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP /
DOWN button.
If [No] is selected : Cancel the index print setting.
If [Yes] is selected : The image will be printed in index format.

5. Press the OK button to confirm the setting.

DPOF

Standard

Index
Size

Back:



Set:OK

Select

All Pics
Cancel

Set:OK

W00Print T

DPOF

Standard

Index

Size

Back:



Set:OK

No

Yes

Set:OK

?8:16<<

ŝ48Ş

DPOF : Print size Copy To Card

ƈ This enables you to copy image files, movie clips and voice recording files to the

memory card.

ƃ Copying to the Memory Card

1. Press the play mode button and press the menu
button.

2. Select the [COPY TO CARD] menu tab by
pressing the LEFT / RIGHT button.

3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.

- [No] : Cancels "Copy to Card".

- [Yes] : All images, movie clips and voice recording files saved in the internal
memory are copied to the memory card after the [Processing!]
message is displayed. After copying has been completed, the
screen will return to play mode.

ƃ When this menu is selected without inserting a memory card, you can select

the [COPY TO CARD] menu but the menu can’t be run.

ƃ If there is not enough space available in the memory card to copy saved

images in the internal memory (20MB), the [COPY TO CARD] command
will copy only some of the images and display [Card Full!] message. Then
the system will return to the playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the memory card into the
camera.

ƃ When you move the images that are stored in the internal memory by doing

[COPY TO CARD] to the card, the next number of file names will be created
in the card to avoid duplication of the file name.

- When the [Reset] of the [File] setup menu was set : The copied file names

start from after the last stored file name.

- When the [Series] of the [File] setup menu was set : The copied file names

start from after the last captured file name. After completing [COPY TO
CARD], the last stored image of the last copied folder is displayed on the
LCD monitor.

INFORMATION

COPY TO CARD

Exit:MENU Move:




No
Yes

ƈ You can specify the print size when printing images stored on the memory card.

The [Size] menu is available only for DPOF 1.1 compatible printers.

ſ DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10

ƃ Setting the Print Size

1. Press the play mode button and press the menu
button.

2. Press the LEFT / RIGHT button and select the
[DPOF] menu tab.

3. Select the [Size] menu by pressing the UP /
DOWN button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Select] : Selection window for an image to be

changed printed size is displayed.

-

Up / Down / Left / Right :

Select an image.

- Zoom W / T Button : Change the print size.

- OK button : Your changes will be saved

and the menu will
disappear.

[All Pics] : Change print size of all saved images.

- W / T button : Select a print size

- OK button : Confirm the changed setting.
[Cancel] : Cancel all of the print size settings.

ƃ Depending on the manufacturer and print model, canceling the printing may

take a little longer for the printer to process.

INFORMATION

Set:OK

WCancel T

DPOF

Standard
Index

Size

Back:



Set:OK

Select

All Pics
Cancel

Set:OK

WCancel T

ŝ49Ş

On Screen Display information PictBridge

ƈ You can use the USB cable to connect this camera to a printer that supports

PictBridge (sold separately) and print the stored images directly. Movie clips and
voice files cannot be printed.

ƃ Setting up the camera for connection with the printer

1. In any mode with the exception of Voice Recording
mode, press the MENU button.

2. Press the LEFT / RIGHT button and select
[SETUP] menu tab.

3. Select [USB] menu by pressing the UP / DOWN
button and press the RIGHT button.

4. Select [Printer] menu by pressing the UP / DOWN
button and press the OK button.

SETUP

Format
Date&Time
Imprint
Sound

USB

Back:



Set:OK

Computer

Printer

[Using the USB cable with Cradle]

[Using the USB cable with Camera]

ƈ You can check shooting information about the displayed image.

ƃ How to select the type of information you want to see

1. Press the play mode button and press the menu
button.

2. Select the [OSD INFORMATION] menu tab by
pressing the LEFT / RIGHT button.

3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.

OSD INFORMATION

Exit:MENU Move:




Full

Basic
OSD Off

ƈ Connecting the Camera to a Printer

ƃ Using the USB cable with Cradle (Optional) :

Connect the camera and the cradle. Connect the cradle to a printer’s USB
port with the supplied USB cable.

ƃ Using the USB cable with Camera :

Connect the camera to a printer’s USB port with the supplied USB cable.

[Full]

[Basic]

[OSD Off]

ISO : 50

Av : F 2.8

Tv : 1/30
Flash : On
1024ŦŦ768
2005/12/01

Presssing the playmode

button for over 1sec.

Presssing the playmode

button for over 1sec.

ŝ50Ş

PictBridge : Picture Selection

PictBridge : Print Setting

Exit:Shutter Set:OK

ƃ Setting the Number of Copies to Print

- Select [One Pic] or [All Pics]. A screen where you can set the number of copies
to print will appear as shown below.

PREV



NEXT



0



Exit:Shutter Set:OK



0



AUTO SET

No
Yes

Exit:MENU Move:




ƈ AUTO SET

1. Use the LEFT and RIGHT buttons to select the

[AUTO SET] menu tab.

2. Use the UP and DOWN buttons to select the

desired submenu value, and then press the OK
button.

[No] : [CUSTOM SET] values are kept.
[Yes] : All values in the [CUSTOM SET] are

automatically changed.

ƈ Easy printing

When you connect the camera to printer in the Play
back mode, you can print a picture easily.

- Pressing the printer( ) button :
Currently displayed image will be printed with the
printer’s default setting.

- Pressing the Left / Right button :
Selects a previous / next image.

ƈ Select pictures to print

1. Press the Menu button.

2. The [IMAGES] menu will appear.

3. Use the UP and DOWN buttons to select the

desired submenu value, and then press the OK
button.
When [One Pic] is selected : The PictBridge

function will be
applied only to the picture currently displayed.

When [All Pics] is selected : The PictBridge function will be applied to all

pictures, excluding movie clips and voice files.

ſ If you selected [Computer] in Step 4, when you connect the camera to your

printer, the [Connecting Computer] message will display and the connection will
not be established. In this case, disconnect the USB cable, and then follow the
procedure from Step 2 and onward. Or, press the Printer button and the camera
is connected to the printer displaying the [Connecting Computer] message. But,
the camera may not connect to the printer and turn off according to the printer
manufacturer.

IMAGES

One Pic
All Pics

Exit:MENU Move:

Print: Menu:OK




[When [One Pic] is selected] [When [All Pics] is selected]

- Press the Up / Down button to select the number of prints.

- When [One Pic] is selected : Use the Left / Right button to select another
picture. After selecting another picture, select select the number of prints for
another picture.

- After setting the number of prints, press the OK button to save.

- Press the Shutter button to return to the menu without setting the number of
prints.

ŝ51Ş

PictBridge : Print Setting PictBridge : Printing

ƈ Printing Pictures

1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab.

2. Use the UP and DOWN buttons to select the desired submenu value, and

then press the OK button.
[Standard] : Print the pictures stored in the

memory card in set numbers.
One picture is printed on one
piece of paper.

[Index] : Print multiple images on one

sheet of paper.

3. The screen shown on the right will appear and the

picture will be printed. If no picture is selected, the
[No Image!] message will be displayed. Press the
LEFT button while printing to cancel the printing
and the [PRINT] menu is displayed.

ſ Number of pictures in an index print varies

depends on the printer used.

001 / 001

PRINT

Standard
Index

Exit:MENU Move:




Cancel:



Now Printing

ƈ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print

Quality, Date Print, and File Name Print menus for printed pictures.

1. Use the LEFT and RIGHT buttons to select the
[CUSTOM SET] menu tab.

2. Use the UP and DOWN buttons to select the
desired submenu value, and then press the RIGHT
button.

3. Use the UP and DOWN buttons to select the
desired submenu value, and then press the OK
button.

ſ Some menu options are not supported in all manufacturer and printer models.

If not supported, the menus are still displayed in the LCD, but are not selectable.

ſ If the setting values are not changed in the automatic / manual setting, the

setting values are automatically kept.

Menu

Setting the size of the printing
paper

Setting the number of pictures to
be printed on a sheet of paper

Setting the quality of the printing
paper

Setting the quality of the picture
to be printed

Setting whether to print the date

Setting whether to print the file
name

Size

Layout

Type

Quality

Date

File Name

Auto, PostCard, Card, 4x6, L, 2L,
Letter, A4, A3

Auto, Full, 1, 2, 4, 8, 9, 16, Index

Auto, Plain, Photo, FastPhoto

Auto, Draft, Normal, Fine

Auto, Off, On

Auto, Off, On

Function

Sub menu

CUSTOM SET

Size
Layout
Type
Quality
Date

Auto
Auto
Auto
Auto
Auto

Exit:MENU Move:




ŝ52Ş

PictBridge : DPOF print Setup menu

PictBridge : RESET

1. Use the LEFT and RIGHT buttons to select the
[RESET] menu tab.

2. Use the UP and DOWN buttons to select the
desired submenu value, and then press the OK
button.
If [No] is selected : Settings will not be reset.
If [Yes is selected : All print and image settings

will be reset.

ſ Default print setting varies depending on the printer manufacturer.

For your printer’s default setting, refer to the user’s guide that came with your
printer.

RESET

No
Yes

Exit:MENU Move:




ƈ DPOF Print : This allows you to directly print the files with DPOF information.

ƈ Initialises user-changed configurations.

1. Use the LEFT and RIGHT buttons to select the
[DPOF PRINT] menu tab.

2. Use the UP and DOWN buttons to select the
desired submenu value, and then press the
OK button.
[No] : Cancel the printing
[Yes] : Directly print the file with the DPOF

information

ſ Depending on the manufacturer and printer model, some menus may not be

available.
With a printer without supporting the DPOF, the menu is still displayed but not
available.

DPOF PRINT

No
Yes

Exit:MENU Move:




Menu tab Main menu Sub menu Secondary menu Page

Series ­Reset -

Off, 1, 3, 5, 10 min - p.54

No -

Yes -

05/12/01 13:00 -

yy/mm/dd ­dd/mm/yy ­mm/dd/yy -

Off ­Off -

Date -

Date&Time -

Off -

Low -

Medium -

High -

ENGLISH FRANÇAIS

DEUTSCH ESPAÑOL ITALIANO

P”CCK»…

PORTUGUÊS

DUTCH

DANSK SVENSKA SUOMI

BAHASA

POLSKI Magyar

--

File

Power Off

Language

Format

Date&Time

Imprint

Sound

p.53

p.54

p.55

p.56

p.55

p.55

ƈIn this mode, you can set up basic settings. You can use the setup menu in all

camera modes, except Voice Recording mode.
The items indicated by are default settings.

ŝ53Ş

Setup menu

ſ Menus are subject to change without prior notice.

Menu tab Main menu Sub menu Secondary menu Page

Computer

-

Printer

-

Off

-

On

-

Dark

-

Normal

-

Bright

-

NTSC -

PAL -

Quick View Off / 0.5, 1, 3 sec - p.57

No

-

Yes

-

Alkaline -

Ni-MH -

AF Lamp

LCD

Video Out

Reset

Battery type

p.56

p.56

p.57

p.58

p.58

USB

p.56

ƃ Assigning File Names

1. In any mode with the exception of Voice Recording
mode, press the MENU button.

2. Press the LEFT / RIGHT button and select the
[SETUP] menu tab.

3. Select the [File ] menu by pressing the UP / DOWN
button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Series] : New files are named using numbers that follow the previous

sequence, even when a new memory card is used, or after
formatting, or after deleting all pictures.

[Reset] : After using the reset function, the next file name will be set from

0001 even after formatting, deleting all or inserting a new memory
card.

5. Press the menu button twice and the menu will disappear.

- The first stored folder name is 100SSCAM, and the first file name is

S5000001.

- File names are assigned sequentially from S5000001 ƍ S5000002 ƍ ~ ƍ

S5009999.

- The folder number is assigned sequentially from 100 to 999 as follows:

100SSCAM ƍ 101SSCAM ƍ ~ ƍ 999SSCAM.

- The files used with the memory card conform to the DCF(Design rule for

Camera File systems) format.

[ File name ]

ƈ This function allows the user to select the file naming format.

SETUP

File

Power Off
Language
Format
Date&Time

Series

Reset

Back:



Set:OK

ŝ54Ş

Setup menu

[ Auto power off ]

ƈ This function switches the camera off after a set amount of time in order to

prevent unnecessary battery drainage.

ƃ Sub menus

[Off] : The power off function will not

operate.

[1, 3, 5, 10 min] : The power will turn off automatically

if not used for the period of time
specified.

- After replacing the battery, the power off setting will
be preserved.

- Note that the automatic power off function will not operate if the camera is in
PC mode, slide show, playing back a voice recording, playing back a movie clip
and taking a composite shot.

SETUP

File

Power Off

Language
Format
Date&Time

Off
1 min

3 min

5 min
10 min

Back:



Set:OK

[ Language ]

ƈ There is a choice of languages that can be displayed on the LCD monitor.

Even if the battery is removed and inserted again, the language setting will be
preserved.

- LANGUAGE sub menu : English, Korean, French,
German, Spanish, Italian, S.Chinese, T.Chinese,
Japanese, Russian, Portuguese, Dutch, Danish,
Swedish, Finnish, Thai, BAHASA(MALAY /
INDONESIAN), Arabic, Hungarian, Czech, Polish
and Turkish.

SETUP

File
Power Off

Language

Format
Date&Time

ENGLISH

FRANÇAIS
DEUTSCH
ESPAÑOL

Back:



Set:OK

ŝ55Ş

[ Formatting a memory ]

ƈ This is used for formatting the memory. If you run [Format] on the memory, all

images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.

ƃ Sub menus

[No] : The memory will not be formatted. Press the

menu button three times and the menu display
will disappear.

[Yes] : A [Processing!] message appears and the

memory will be formatted. If you ran FORMAT
in Play mode, a [No Image!] message will
appear.

Be sure to run [Format] on the following types of memory card.

- A new memory card, or an unformatted memory card

- A memory card that has a file this camera can't recognise or one that has been
taken from another camera.

- Always format the memory card using this camera. If you insert a memory card
that has been formatted using other cameras, memory card readers, or PCs,
you will get a [Card Error!] message.

Setup menu

SETUP

File
Power Off
Language

Format

Date&Time

No

Yes

Back:



Set:OK

[ Setting up the Date / Time / Date type ]

ƈ You can change the date and time that will be displayed on the captured images

and set up the date type.

ƃ Setting Date / Time & Selecting Date Format

RIGHT button : Selects the year/ month/ day/ hour/

minute date type.

LEFT button : Moves the cursor to the

[Date&Time] main menu if the
cursor is at the first item of the date
and time setup. In all other cases,
the cursor will be shifted to the left of its current position.

UP and DOWN buttons : Changes the setting value

- Date type : [yy/mm/dd], [dd/mm/yy], [mm/dd/yy], [Off]

[ Imprinting the recording date ]

ƈ There is an option to include DATE / TIME on still images.

ƃ Sub menus

[Off] : The DATE & TIME will not be

imprinted on the image file.

[Date] : Only the DATE will be imprinted on

the image file.

[Date&Time] : The DATE & TIME will be imprinted

on the image file.

SETUP

Power Off
Language
Format
Date&Time

Imprint

Off
Date

Date&Time

Back:



Set:OK

SETUP

File
Power Off
Language
Format

Date&Time

Back:



Set:OK



05/12/01



07:35

yy/mm/dd

ŝ56Ş

Setup menu

[ Sound ]

ƈ If you set the operation sound to ON, various sounds will be activated for camera

startup, when button are pressed, so that you can be aware of the camera
operation status.

ƃ [Sound] sub menu : Off / Low / Medium / High

[ Connecting an External Device (USB) ]

ƈ You can select an external device to which you want to connect the camera

using the USB cable.

ƃ Sub menus

- [Computer] : Select this if you want to connect the
camera to your PC.
Refer to page 68 for instructions on
how to connect the camera to your
PC.

- [Printer] : Select this if you want to connect the
camera to your printer.
Refer to page 49 for instructions on
how to connect the camera to your
printer.

SETUP

Language
Format
Date&Time
Imprint

Sound

Back:



Set:OK

Off

Low
Medium
High

SETUP

Format
Date&Time
Imprint
Sound

USB

Back:



Set:OK

Computer

Printer

[ Auto Focus lamp ]

ƈ You can turn on and off the Auto Focus lamp.

ƃ Sub menus

[Off] : The AF lamp will not light up in a low light

condition.

[On] : The AF lamp will light up in a low light

condition.

[ LCD brightness ]

ƈ You can adjust the LCD brightness.

ƃ [LCD] sub menu : Dark, Normal, Bright

SETUP

Date&Time
Imprint
Sound
USB

AF Lamp

Back:



Set:OK

Off

On

SETUP

Imprint
Sound
USB
AF Lamp

LCD

Back:



Set:OK

Dark

Normal

Bright

ŝ57Ş

[ Selecting Video out type ]

ƈ The Movie output signal from the camera can be NTSC or PAL.

Your choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.

ƈ Connecting to an external monitor

ƃ Using the AV cable with Cradle : Connect the camera

and the cradle. Connect the cradle to an external
monitor with the supplied AV cable.

ƃ Using the AV cable with Camera : Connect the

camera to an external monitor with the supplied AV
cable.

Yellow - Video
White - sound

Setup menu

SETUP

Sound
USB
AF Lamp
LCD

Video Out

Back:



Set:OK

NTSC

PAL

[Using the AV cable with Cradle]

[Using the AV cable with Camera]

- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.

- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway.

- When using a TV as an external monitor, you will need to select the external or

AV channel of the TV.

- There will be a digital noise on the external monitor, but it is not a malfunction.

- If the image is not in the centre of the screen, use the TV controls to centre it.

- When the camera is connected to an external monitor, the menu will be visible

on the external monitor and the menu functions are the same as those
indicated on the LCD monitor.

- When selecting the PAL video out type, the TV monitor turns off and the LCD

monitor of the camera turns on when you record a movie. After completing the
recording, the TV monitor turns on and the LCD monitor of the camera turns
off.

[ Quick view ]

ƈ If you enable Quick View before capturing an image, you can view the image

you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.

ƃ Sub menus

[Off] : The quick view function can’t be

activated.

[0.5, 1, 3 sec] : The captured image is briefly

displayed during the selected time.

SETUP

USB
AF Lamp
LCD
Video Out

Quick View

Back:



Set:OK

off

0.5 sec

1 sec
3 sec

ŝ58Ş

Setup menu Setting up the Mycam menu

[ Initialisation ]

ƈ All camera menu and function settings will be restored to their default values.

However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be
changed.

ƃ Sub menus

[No] : Settings will not be restored to their defaults.
[Yes] : All settings will be restored to their defaults.

SETUP

AF Lamp
LCD
Video Out
Quick View

Reset

Back:



Set:OK

No

Yes

[ Selecting a battery type ]

ƈ If a battery type is selected, the camera will be

optimized according to the selected battery type.

ƃ [Battery Type] sub Menu: Alkaline / Ni-MH

SETUP

LCD
Video Out
Quick View
Reset

Battery Type

Back:



Set:OK

Alkaline

Ni-MH

Start up image

ƈ You can set up a start up image, start up sound and shutter sound. Every

camera working mode (with the exception of Voice recording mode) has the
MyCAM menu. The items indicated by are default settings.

Menu tab Main menu Sub menu Page

Off LOGO

User Image 1 User Image 2

Off Sound 1

Sound 2 Sound 3

Off Sound 1

Sound 2 Sound 3

Start Image

Start Sound

Shutter Sound

p.58

p.59

p.59

ſ Menus are subject to change without prior notice.

ƈ You can select the image that is first displayed on the LCD monitor whenever

the camera is turned on.

ƃ Start up image : [Off], [LOGO], [User Image1],

[User Image2]

- Use a saved image for the start-up image with the

[User Image] in the [RESIZE] menu in the play
mode.

- The start-up image will not be deleted by [DELETE]

or [Format] menu.

- The User images will be deleted by [Reset] menu.

MYCAM

Start Image

Start Sound
Shutter Sound

Back:



Set:OK

ŝ59Ş

Start up sound

Shutter sound

Important notes

ƈ You can select the sound that is activated whenever the camera is turned on.

ƃ Start up sound : [Off], [Sound 1], [Sound 2], [Sound 3]

- If the start up image is set to [Off], the start up sound
will not activate, even though you may have set
these to on.

ƈ You can select the shutter sound.

ƃ Shutter sound : [Off], [Sound 1], [Sound 2], [Sound 3]

MYCAM

Start Image

Start Sound

Shutter Sound

Off

Sound 1
Sound 2
Sound 3

Back:



Set:OK

MYCAM

Start Image
Start Sound

Shutter Sound

Off

Sound 1

Sound 2
Sound 3

Back:



Set:OK

Be sure to observe the following precautions!

ƈThis unit contains precision electronic components. Do not use or store this unit

in the following locations.

- Areas exposed to severe changes in temperature and humidity.

- Areas exposed to dust and dirt.

- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.

- Environments where there is high magnetism or excessive vibration.

- Areas with high explosives or highly flammable materials.

ƈDo not leave this camera in places subject to dust, chemicals (like naphthalene

and mothball), high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when not planning
to use the camera for a long period of time

ƈSand can be particularly troublesome to cameras.

- Do not let sand get inside the unit when using it on beaches, coastal dunes, or
other areas where there is lots of sand.

- Doing so may result in failure or may permanently render the unit unusable.

ƈHandling the camera

- Never drop the camera or subject it to severe shocks or vibrations.

- Prevent the large size LCD monitor from an impact. When this camera is not
used, keep this camera in the camera case.

- Avoid obstructing the lens or the flash when you capture an image.

- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with
wet hands.

- If you use this camera in wet places, such as beach or pool, do not let water or
sand get inside the camera. Doing so may result in failure or may permanently
damage the unit.

ŝ60Ş

Important notes

ƈ Extremes in temperature may cause problems.

- If the camera is transferred from a cold to a warm and humid environment,
condensation can form on the delicate electronic circuitry. If this occurs, turn
the camera off and wait for at least 1 hour until all moisture is dispersed.
Moisture build up can also occur in the memory card. If this happens, turn off
the camera and remove the memory card. Wait until the moisture has
dispersed.

ƈ Caution on Using the Lens

- If the lens is subjected to direct sunlight, it could result in discoloration and
deterioration of the image sensor.

- Pay attention not to get fingerprints or foreign substances on the surface of the
lens.

- When the lens cover opens, the outer lens that you can see is for auto focus.
When using or cleaning this camera, handle the outer lens with care.

ƈ If the digital camera is not used for a long period, an electric discharge can

occur.
It is a good idea to remove the battery and the memory card if you do not intend
using the camera for an extended period of time.

ƈ If the camera is exposed to an electronic interference, it will turn itself off to

protect the memory card.

ƈ Camera Maintenance

- Use a soft brush (available from photo stores) to gently clean the lens and LCD
assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid
can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into
contact with solvent materials such as benzol, insecticide, thinners etc. This
may damage the body shell of the camera and also affect its performance.
Rough handling can damage the LCD monitor. Take care to avoid damage
and keep the camera in its protective carry case at all times when not in use.

ƈ Do not attempt to disassemble or modify the camera.

ƈ Under certain conditions, static electricity can cause the flash unit to fire. This is

not harmful to the camera and is not a malfunction.

ƈ When images are uploaded or downloaded (when the charger and USB cable

are inserted into the cradle at the same time), the data transfer may be affected
by static electricity.
In this case, disconnect and re-connect the USB cable before trying the transfer
again.

ƈ Before an important event or going on a trip, you should check the camera

condition.

- Take a picture for testing the camera condition and prepare extra battery.

- Samsung cannot be held responsible for camera malfunctions.

ŝ61Ş

Warning indicator

Before contacting a service centre

ƈThere are several warnings that may appear on the LCD display

Card Error!

ϛMemory card error

ƍ Turn off the camera power and turn it on again
ƍ Insert the memory card again
ƍ Insert the memory card and format the memory card. (p.55)

Card Locked!

ϛThe memory card is locked

ƍ SD memory card : Slide the write protect switch to the top of the memory card

Memory Full! / Card Full!

ϛThere is insufficient memory capacity to take an image

ƍ Insert a new memory card
ƍ Delete unnecessary image files to free up some memory

No Image!

ϛThere are no images stored on the memory

ƍ Take images
ƍ Insert a memory card that is holding some images

File Error!

ϛFile error

ƍ Format the memory card

ϛMemory card error

ƍ Contact a camera service centre

Low Battery!

ϛThere is low battery capacity

ƍ Insert fresh batteries.

Low Light!

ϛWhen taking pictures in dark places

ƍ Take pictures in Flash Photography mode.

Out Of Number

ϛWhen selecting too many printing pages in the PictBridge menu.

ƍ Select printing page within the limitation.

The camera doesn’t switch on

ϛThere is low battery capacity

ƍ Insert fresh batteries. (p.9)

ϛBattery are inserted incorrectly with the polarities reversed

ƍ Insert the battery according to the polarity marks (+, -)

ϛThe battery is not inserted

ƍ Insert the battery and turn on the camera

ƈ Please check the following

ŝ62Ş

Before contacting a service centre

Camera does not take images when pressing the Shutter button

ϛThere is insufficient memory capacity

ƍ Delete unnecessary image files

ϛThe memory card has not been formatted

ƍ Format the memory card (p.55)

ϛThe memory card is exhausted

ƍ Insert a new memory card

ϛThe memory card is locked

ƍ Refer to [Card Locked!] error message

ϛThe camera’s power is off

ƍ Turn the camera power on

ϛThe battery are exhausted

ƍ Insert fresh batteries.

ϛBattery is inserted incorrectly with the polarities reversed

ƍ Insert the battery according to the polarity marks (+, -)

The camera suddenly stops working while in use

ϛThe camera was stopped due to a malfunction

ƍ Remove /re-insert battery and switch the camera on

The images are unclear

ϛA picture was taken the subject without setting an appropriate macro mode

ƍ Select an appropriate macro mode to take a clear image.

ϛThe picture was taken with the subject beyond the flash range

ƍ Take a picture within the flash range

ϛThe lens is smudged or dirty

ƍ Clean the lens

The flash does not fire

ϛFlash off mode has been selected

ƍ Dis-engage flash off mode

ϛThe camera mode can’t use the flash

ƍ Refer to the FLASH instruction (p.21)

Incorrect date and time is displayed
ϛThe date and time have been set incorrectly or the camera has adopted the

default settings

ƍ Reset the date and time correctly

The camera buttons do not operate

ϛCamera malfunction

ƍ Remove /re-insert battery and switch the camera on

A card error has occurred while the memory card is in the camera.

ϛIncorrect memory card format

ƍ Re-format the memory card

The images don't play back

ϛIncorrect file name (Violation of DCF format)

ƍ Do not change the image file name

Colour of image is different to the original scene

ϛ White balance or effect setting is incorrect

ƍ Select appropriate White balance and effect

Images are too bright

ϛExposure is excessive

ƍ Reset exposure compensation

ŝ63Ş

Before contacting a service centre Specifications

No image on external monitor

ϛThe external monitor has not been connected properly with the camera

ƍ Check the connection cables

ϛThere are incorrect files in the memory card

ƍ Insert a memory card that has correct files

When using the PC’s explorer, the [Removable Disk] file does not show

ϛCable connection is incorrect

ƍ Check the connection

ϛThe camera is off

ƍ Turn the camera on

ϛThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~

10.3. Alternatively the PC does not support USB.
ƍ Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~ 10.3 to PC that

supports USB.

ϛThe camera driver is not installed

ƍ Install a [USB Storage Driver]

ƈ Image Sensor

- Type : 1/2.5" CCD

- Effective Pixel : Approx. 5.1 Mega-pixel

- Total Pixel : Approx. 5.3 Mega-pixel

ƈ Lens

-

Focal Length : SHD Lens f = 5.8 ~ 17.4mm (35mm film equivalent : 35~105mm)

- F No. : F2.8 ~ F7.1 (Wide), F4.9~F12.4 (Tele)

- Digital Zoom :ŋStill Image mode : 1.0X ~ 5.0X

ŋPlay mode : 1.0X ~ 10.1X (depends on image size)
ƈ LCD Monitor : 2.4" color TFT LCD (112,000 dots)
ƈ Focusing

- Type : TTL auto focus

- Range : ŋNormal : 80cm ~ infinity

ŋMacro : 5cm ~ 80cm (Wide), 40cm ~ 80cm (Tele)
ŋAuto Macro : 5cm ~ Infinity (Wide), 40cm ~ Infinity (Tele)

ƈ Shutter

- Type : Mechanical and Electronic shutter

- Speed : 1 ~ 1/5,000 sec. (Manual : 8 ~ 1/5,000 sec.)

ƈ Exposure

- Control : Program AE

- Metering : Multi, Spot

- Compensation : ±2EV (0.5EV steps)

- ISO Equivalent : Auto, 50,100, 200, 400

ƈ Flash

- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off

- Range : Wide : 0.2m~3.0m, Tele : 0.4m ~ 2.5m (ISO AUTO)

- Recharging Time : Approx. 6 sec.

ƈ Sharpness : Soft, Normal, Vivid
ƈ Effect : Normal, B&W, Sepia, Red, Blue, Green, Negative, RGB

ŝ64Ş

Specifications

ƈ White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,

Tungsten, Custom

ƈ Voice Recording : Voice Recording (max.1 hour),

Voice Memo in Still Image (max. 10 sec.)

ƈ Date Imprinting : Date, Date&Time, Off (user selectable)

ƈ Shooting

- Still Image: ŋModes : Auto, Program, Scene
ſ

Scene : Night, Portrait, Children (in Mode Dial), Landscape, Close-

up, Sunset, Dawn, Backlight, Fireworks, Beach & Snow

ſ Mode Dial : Auto, Program, Manual, Movie, Scene, Portrait,

Night, Children

ŋContinuous : Single, Continuous, AEB
ŋSelf-timer : 10 sec., 2 sec., Double (10 sec., 2 sec.)

- Movie Clip :ŋWith Audio or without Audio

(user selectable, recording time : memory capacity dependent)

ŋSize : 640x480, 320x240, 160x120

(3X Optical Zoom, Mute during Zoom Operation)

ŋFrame rate : 30 fps, 15 fps
ŋ

Movie Editing (Embedded): Pause during recording, Still Image Capture

ƈ Storage

- Media :ŋInternal memory : Approx.20MB flash memory

ŋExternal memory : MMC/SD card (Up to 1GB Guaranteed)

- File Format :ŋStill Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0

ŋMovie Clip : AVI (MJPEG)
ŋAudio : WAV

- Image Size

5M 4M 3M 2M 1M VGA

2592x1944 2272x1704 2048x1536 1600x1200 1024x768 640x480

- Capacity (20 MB)

* These figures are measured under SamsungŖs standard conditions and may

vary depending on shooting conditions and camera settings

ƈ Image Play

- Type : Single image, Thumbnails, Slide show, Movie Clip

- Editing : Trimming, Resizing, Rotate, Effect

ƈ Interface

- Digital output connector : USB 2.0 - Audio : Mono

- Video output : NTSC, PAL (user selectable) - Cradle Interface

ƈ Power Source

- Primary Battery : 2x AA Alkaline(High Capacity)

- Rechargeable battery(Optional) : SNB-2512 (Ni-MH)
SBP-2524 (Ni-MH)

ſ Included battery may vary depending on sales region.

ƈ Dimensions (WxHxD) : 97 X 62 X 28mm

ƈ Weight : Approx. 136.2gg (without batteries and card)

ƈ Operating Temperature : 0 ~ 40ŭC

ƈ Operating Humidity : 5 ~ 85%

ƈ Software

-

Camera Driver : Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.2 ~ 10.3)

- Application : Digimax Master

ƈ Special Features : User-friendly ŗEffect” button, Easy Grip, 2.4” Large LCD,

Convenient Mode Dial

ſ Specifications are subject to change without prior notice.
ſ All trademarks are the property of their respective owners.

5M 4M 3M 2M 1M VGA

Super Fine

7
Fine 14
Normal 21

Super Fine

10

Fine

18

Normal

24

Super Fine

12

Fine

22

Normal

32

Super Fine

19

Fine

34

Normal

43

Super Fine

52

Fine

83

Normal

89

Super Fine

114

Fine

125

Normal

157

ŝ65Ş

Software Notes About the software

System Requirements

Please ensure that you read the instruction manual carefully before use.
ϛThe attached software is a camera driver and image editing software tool for

Windows.

ϛUnder no circumstances should all or part of either the software or the user

manual be reproduced.

ϛCopyrights for software are licensed only for use with a camera.
ϛIn the unlikely event of a manufacturing fault, we will repair or exchange your

camera.
We cannot, however, be held responsible in any way for damage caused by
inappropriate use.

ϛUsing a Hand-made PC or a PC and OS that has not been guaranteed by the

manufacturer is not covered by the Samsung warranty.

ϛBefore reading this manual, you should have a basic knowledge of computers

and O/S (Operating Systems).

After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.

Before connecting the camera to the PC, you
should first install the camera driver.

ƃ Be sure to check the system requirements before installing the driver.
ƃ You should allow 5 ~ 10 seconds for running the automatic setup program

according to the capability of your computer. If the frame does not show, run
the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive
root directory.

INFORMATION

For Windows For Macintosh

Windows 98/98SE/2000/ME/XP Mac OS 9.2 ~ 10.3

5QVQU]U5*:)5 5QVQU]U5*:)5

200MB of available hard disk space

110MB of available hard-disk space

USB port USB port

CD-ROM drive CD-ROM drive

PC with processor better than Pentium II 450MHz
(Pentium 700MHz recommended)

1024x768 pixels, 16bit color display
compatible monitor
(24bit color display recommended)

Power Mac G3 or later

ƈ Camera driver : This enables images to transfer between the camera

and PC.

This camera uses the USB Storage Driver as the camera driver. You can use
the camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
computer]. A USB Storage Driver is provided only for Windows. A USB Driver
for MAC is not included with the Application CD. You can use the camera with
Mac OS 9.2 ~ 10.3.

ƈ Digimax Master : This is the all-in-on multi media software solution.

You can download, view, edit and save your digital images and movie clips clip
with this software. This software is only compatible with Windows.

ŝ66Ş

Setting up the application software

ƈ To use this camera with a PC, install the application software first.

After this has been done, the stored images in the camera can be moved to the
PC and can be edited by an image editing program.

ƈ You can visit the Samsung web-site through the internet.

http://www.samsungcamera.com : English

1. The auto run frame will display. Click the
[Install] menu in the Auto run frame.

1588-7276

___KIUMZI[MZ^QKMKWSZ

2. Install the DirectX, Digimax Master by selecting a button shown on the
monitor.

[Click!]

[Click!]

[Click!]

[Click!]

[Click!]

[Click!]

[Click!]

[Click!]

[Click!]

[Click!]

[Click!]

[Click!]

[Click!]

ŝ67Ş

Setting up the application software Starting PC mode

4. Turn the camera power on.
The [Found New Hardware Wizard] will
open and the computer will recognize the
camera.

ſ If your OS is Windows XP, an image

viewer program will open.
If the download window of Digmax Master
opens after starting Digimax Master, the
camera driver was setup successfully.

3. After restarting the computer, connect the PC to the camera with the USB
cable.

Ү If you connect the USB cable to a USB port on your PC and then turn on the

power, the camera will automatically switch to "computer connection mode".

ҮIn this mode, you can download stored images to your PC through the USB

cable.

Ү The LCD monitor is always turned off in PC mode.

ƃ If you have installed the camera driver, The [Found New Hardware Wizard]

may not open.

ƃ On a Windows 98 or 98 SE system, the Found New Hardware Wizard

dialog box opens and a window asking you to select a driver file may
appear. In this case, specify "USB Driver" in the CD supplied. (for Windows
98 and 98 SE).

INFORMATION

SETUP

Format
Date&time
Imprint
Sound

USB

Back:



Set:OK

Computer

Printer

ƈ Connecting the camera to a PC

1. In any mode with the exception of Voice Recording
mode, press the Menu button.

2. Press the LEFT/ RIGHT button and select the
[SETUP] menu tab.

3. Select the [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.

4. Use the UP and DOWN buttons to select
[Computer], and then press the OK button.

5. Press the menu button twice and the menu will
disappear.

6. Connect the PC to the camera with the USB cable.

ŝ68Ş

Starting PC mode Removable disk

ƈ Downloading stored images

You can download the still images stored on the camera to your PC's hard disk
and print them or use a photo editing software to edit them.

1. Connect the camera to your PC with the USB cable.

2. On your computer's desktop display, select
[My computer] and double click [Removable
Disk ƍ DCIM ƍ 100SSCAM].
The image files will then be displayed.

3. Select an image and press the right
mouse button.

4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.

- [Cut] : cuts a selected file.

- [Copy] : copies files.

5. Click a folder where you want to paste the file.

[Using the USB cable with Cradle]

[Using the USB cable with Camera]

ƈ Connecting the camera to a PC

ƈ Disconnecting the camera and PC : Refer to page 69

(Removing the removable disk).

ſIf you selected [Printer] in Step 4, when you connect the camera to your

printer, the [Connecting Printer] message will display and the connection will
not be established.
In this case, disconnect the USB cable, and then follow the procedure from
Step 2 and onward.

ƃ To save battery power, it is recommended that you use the cradle when

connecting the camera to a computer.

INFORMATION

ŝ69Ş

Removing the removable diskRemovable disk

ƃ We recommend that you should copy the images to the PC to view them.

Opening images directly from the removable disk may be subject to
unexpected disconnection.

ƃ When you upload a file that is not taken by this camera to the Removable

Disk, the [File Error!] message will be displayed on the LCD monitor in the
PLAY mode, and nothing is displayed in THUMBNAIL mode.

CAUTION

7. An image file is transferred from the camera
to your PC.

6. Press the right mouse button and a pop-up
menu will open. Click [Paste].

- By using [Digimax Master], you can see the stored images in the memory

directly on the PC monitor and you can copy or move the image files.

ƈ Windows 98SE

1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, you have to wait until the lamp illuminates.

2. Unplug the USB cable.

ƈ Windows 2000/ME/XP

(The illustrations may be different from the real display in accordance with the
Windows O/S.)

1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, you have to wait until the lamp illuminates.

3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage Device]
and click the [Stop] button.

4. The [Stop a Hardware device] window will open.
Select the [USB Mass Storage Device] and click
the [OK] button.

2. Double-click the [Unplug or Eject Hardware] icon
on the task bar.

5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.

[Double-click!]

[Click!]

[Click!]

[Click!]

ŝ70Ş

Removing the USB Driver for Windows 98SE

Removing the removable disk

6. A [Unplug or Eject Hardware] window will
open. Click the [Close] button and the
removable disk will be removed safely.

7. Unplug the USB cable.

1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.

2. Check the MAC OS. You can check the MAC OS version during MAC OS
start-up.
This camera is compatible with MAC OS 9.2 ~ 10.3.

3. Connect the camera to the Macintosh and turn the camera power on.

4. A new icon will be displayed on the desktop after connecting the camera to
the MAC.

1. Double click a new icon on the desktop and the folder in the memory will be
displayed.

2. Select an image file and copy or move it to MAC.

ƃ For Mac OS 10.0 or later : First complete uploading from computer to

camera and then remove the removable disk
with the Extract command.

CAUTION

Setting up the USB Driver for MAC

Using the USB Driver for MAC

[Click !]

ƈ To remove the USB driver, refer to the process shown below.

1. Connect the camera and your PC, turn them on.

2. Check whether the Removable Disk is on the [My Computer].

3. Remove the [Samsung Digital Camera] on the Device manager.

6. Uninstallation is complete.

[Click !]

[Click !]

[Click !]

[Click !]

4. Disconnect the USB cable.

5. Remove the [Digimax S500] on the Add/Remove Programs Properties.

ŝ71Ş

Digimax Master

ƈ You can download, view, edit and save your images and movies with this

software. This software is only compatible with Windows except for
the Windows 98.

ƈ To start the program, click [Start ƍ Programs ƍ Samsung ƍ Digimax Master].

3. Click [Next(N) >] button.

[Click !]

ƃ Downloading images

1. Connect the camera to your PC.

2. A window for downloading images will
display after connecting the camera and
your PC.

- To download the captured images, select

the [Select All(A)] button.

- Select desired folder in the window and

click the [Select All(A)] button. You can
save captured images and selected folder.

- If you click the [Cancel] button, downloading will be

cancelled.

[Click !]

4. Select a destination and make a folder to
save downloaded images and folders.

- Folder names can be made in order of date

and images will be downloaded.

- Folder name will be made as you want and

images will be downloaded.

- After selecting a folder that was made

before, images will be downloaded.

5. Click [Next(N) >] button.

6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.

[Click !]

7. Downloaded images will be displayed.

[Click!]

ŝ72Ş

Digimax Master

ƃ Image viewer : You can view the stored images.

ڹ

ڽ
ھ

ڿ

ں

ڻ

ڼ

- Image viewer functions are listed below.

ڹ Menu bar : You can select menus.

File, Edit, View, Tools, Change functions, Auto download, help, etc.

ں Image selection window : You can select the desired images in this window.
ڻ Media type selection menu : You can select image viewer, image edit and

movie edit functions in this menu.

ڼ Preview window : You can preview a image or a movie clip and check the

multi media information.

ڽ Zoom bar : You can change preview size.
ھ Folder display window : You can see the folder location of the selected

image.

ڿ Image display window : Images of the selected folder are displayed.

ſ Refer to the [Help] menu in Digimax Master for further information.

ƃ Image edit : You can edit the still image.

ڹ

ں

ڻ

ڼ

- Image edit functions are listed below.

ڹ Edit menu : You can select the following menus.

[Tools] : You can resize or crop the selected image. See the [Help] menu.
Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image. See the

[Help] menu.

ں Drawing tools : Tools for editing an image.
ڻ Image display window : a selected image displays in this window.
ڼ Preview window : You can preview the changed image.

ſ A still image edited with Digimax Master can’t be played back on the camera.
ſ Refer to the [Help] menu in Digimax Master for further information.

ŝ73Ş

FAQDigimax Master

ƃ Movie edit : You can get the still image, movie clip, narration, music files together

in a movie clip.

ڹ

ں

- Movie clip edit functions are listed below.

ڹ Edit menu : You can select the following menus.

[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and saturation.
[Effects] : You can insert an effect.
[Set Text] : You can insert texts.
[Narrate] : You can insert a narration.
[Produce] : You can save the edited multi media as a new file name.

Frame display window : You can insert multi media in this
window. You can select AVI, Windows media (wmv), Windows
media (asf) and movie clip for this camera (avi, MPEG-4) file
types.

ں Frame display window : You can insert multi media in this window.

ſ Some movie clips that was compressed with a codec that is not compatible with

the Digimax Master can’t play back in the Digimax Master.

ſ Refer to the [Help] menu in Digimax Master for further information.

ƈ Please check the following if the USB connection malfunctions.

Case 1 USB cable is not connected or it is not the supplied USB cable.

ƍ Connect the supplied USB cable.

Case 2 The camera is not recognized by your PC.

Sometimes, the camera may appear under [Unknown Devices] in
Device Manager.

ƍ Install the camera driver correctly.

Turn off the camera, remove the USB cable, plug in the USB cable
again, and then turn on the camera.

Case 3 There is an unexpected error during file transfer.

ƍ Turn the camera power off and on again. Transfer the file again.

Case 4 When using the USB hub.

ƍ There may be a problem in connecting the camera to the PC through

the USB hub if the PC and the hub are not compatible. Wherever
possible, connect the camera to the PC directly.

Case 5 Are other USB cables connected to the PC?

ƍ The camera may malfunction when it is connected to the PC at the

same time as another USB cable. In this case, disconnect the other
USB cable, and connect only one USB cable to the camera.

ŝ74Ş

FAQ

Case 6 When I open the Device Manager (by clicking Start ƍ (Settings) ƍ

Control Panel ƍ (Performance and Maintenance) ƍ System ƍ
(Hardware) ƍ Device Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.

ƍ Right-click on the entry with the question (?) or exclamation (!) mark

and select "Remove". Restart the PC and connect the camera the
again. For Windows 98 PC, remove the camera driver also, restart the
PC, and then reinstall the camera driver.

Case 7 In some security programs (Norton Anti Virus, V3, etc.), the computer

may not recognise the camera as a removable disk.

ƍ Stop the security programs and connect the camera to the computer.

Refer to the security program instructions about how to stop the
program.

ƈ When the movie clip doesn’t play back on the PC

ſ When the movie clip recorded by the camera doesn’t play back on the PC,

the causes are mostly due to the codec installed on the PC.

ƃ When the DirectX 9.0 or later is not installed

ƍ Install the DirectX 9.0 or later

1) Insert the CD provided with the camera

2) Run the windows explorer and select the [CD-ROM drive:\ USB

Driver\DirectX 9.0] folder and click the DXSETUP.exe file.The DirectX will be
installed. Visit the following site for downloading the
DirectX.http://www.microsoft.com/directx

ƃ If a PC (Windows 98) stops responding while the camera and PC are connected

repeatedly
ƍ If a PC (Windows 98) is turned on for a long time and the camera is

connected repeatedly, the PC may not recognise the camera. In this case, re­start the PC.

ƃ If a PC connected with the camera stops responding while Windows is starting.

ƍ In this case, disconnect the PC and the camera and Windows will start.

If the problem happens continuously, set the Legacy USB Support to disable
and re-start the PC. The Legacy USB Support is in the BIOS setup menu.
(The BIOS setup menu differs from the PC manufacturers and some BIOS
menus don’t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.

ƃ If the movie clip can’t be deleted, removable disk can’t be extracted or an error

message displays during the file transfer.
ƍ If you install only the Digimax Master, the problems mentioned above

occasionally happen.

- Close the Digimax Master program by clicking the Digimax Master icon on
the Taskbar.

- Install all the application programs included in the software CD.
(You must install the Movie clip codec)

ŝ75Ş

MEMO MEMO

ŝ76Ş

MEMO MEMO

ŝ77Ş

An FCC warningCorrect Disposal of This Product

Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)

(Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or its

literature, indicates that it should not be disposed with other household
wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.

ҮThis device has been tested in accordance with the limits of a class B digital

device under item 15 of the FCC rules. These limits are designed to provide
protection against harmful interference in commercial installation. This
equipment generates, absorbs and can emit radio frequency energy. If it is not
installed and used in accordance with the instructions, it may cause harmful
interference to radio communication.
There is however, no guarantee that interference will not occur in some
situations. Should any interference occur when this device is in operation,
please try one or more of the following measures.

ƈ Change the location and direction of any aerial.
ƈ Increase distance between the camera and the affected device.
ƈ Use a different socket away from the affected device.
ƈ Please contact a Samsung agent or a radio/TV engineer.

ҮThis device complies with part 15 of the FCC Rules.
ҮChanges or modifications not expressly approved by the party responsible for

compliance could void user's authority to operate the equipment.