Hanwei AT6000 Operation Manual

AT6000 Alcohol Tester

HENAN HANWEI ELECTRONICS CO.,LTD Tel: [phone] / 80 Fax: [phone]

Henan Hanwei Electronics Co.,Ltd www.hwsensor.com

AT6000 Alcohol Tester for Personal Use

Preface

Reminding Before your testing.

Alco Smart Breath tester should be used only to give an indication of the possible presence of

alcohol in the breath/blood. You should not rely upon it as the sole basis to determine intoxication

or whether it is safe to drive a vehicle, operate equipment, or engage in dangerous activities.

Everyone has different body responds to alcohol consumption and his testing result only as

reference, not a subject standard for consequent decision.

The manufacture, importer or distributor takes no responsibility whatsoever for the use of this

product for any reason. This product must not be used as a tool for determining whether a person is

able to operate a motor vehicle or device legally or safely. The intake of any alcohol will impair

reflexes and judgment to operate motor vehicle.

Before your testing, please view the manual carefully and follow the instruction strictly.

General Introduction

AT6000 breath alcohol tester is kind of tester designed to measure concentration result of the

breathed alcohol in the human body. This device adopts advanced NM Hot-wire alcohol sensor which

has excellent sensitivity and reproducibility, fashion and portable design make it more convenient for

personal use. When the alcohol content exceeds the preset limited level, this device would send an

audio and video warning to remind your safety.

Main Feature

:

Advanced NM Hot-wire alcohol sensor

Quick response

SMD assembling, stable performance

Smart MCU control

Direct testing process LCD indication

Digital LCD display with light blue backup

Portable and fashion design

Audio warning beyond pre-set limit

Sensor Fault Self checking

Battery saved design, low voltage indication

Technical Data

Sensor type: NM Hot-wire alcohol sensor
Detection Range: 0.001.00mg/L (0.000.20%BAC; 0.002.00g/L; 0.002.00‰BAC)

Alarming Level: 0.24mg/L (0.05%BAC, 0.50g/L; 0.50‰BAC)

Accuracy: ±5% F.S
Response Time: 5s Warm-up Time: 20s

Resume Time: ≤20s
Working Voltage: DC4.5V3×AAABatteries; Working Current: ≤120mA
Working Environment: Temperature -1050 Relative Humidity ≤95% No Dews

Display: 3 digits LCD display with light blue backup

Dimension: 103×65×27mm (L×W×H), ≤64 g Battery excluded

Battery expectancy time: ≥200Times

E-mail: [e-mail] Fax:[phone]