I. General Specifications
1. General
The Hantronix dot matrix graphic LCD module consist of liquid crystal display
CMOS common driver and CMOS segment driver, a Gray STN Positive LCD,
a Yellow-Green LED Backlight and a dc-dc-converter.
2. Features
A. 64 Bits Shift Register to Internal LCD Circuit.
B. Display Data Is Stored In Display Data Ram From MPU
C. High Voltage CMOS Process.
D. Drive Method: 1/64 Duty, 1/9 Bias
E. The Module Operating Voltage: 5V
F. The LCD Operating Voltage: 9.0V;
G. Viewing Direction: 6:00 or 12:00 h
H. Operating Temperature: -20°C~70°C
I. Storage Temperature: -30°C~85°C
J. The Connector Method Between LCD And PCB: Zebra.
K. Built-in Controller : Samsung KS108B
3.Mechanical Data:
(1) Module Size ----------------------- 75.0 w x 52.7 h mm
(2) Viewing Area --------------------- 60.5 w x 33.0 h mm
(3) Dot Size ------------------------- 0.4 w x 0.4 h mm
(4) Dot Quality------------------------ 128*64
HANTRONIX, INC.
10080 BUBB RD.
CUPERTINO, CA 95014
Q.A.: REV.:
JK 1.0
HDM64GS12L-5
SHEET 2 OF 8
DATE:
1/30/03
4. Pin Connections:
Pin No. Symbol
Function
1 VSS Ground(0v)
2 VDD Logic Supply Voltage (+5.0v)
3 V0 LCD Driver Voltage Input (+13.0v)
4 R/S Data Or Instruction
5 R/W Read/Write Select
6 E Enable Signal
7~14 DB0~DB7 Data Bus Line
15 CS1 Chip Selection(Segment Driver 1)
16 CS2 Chip Selection(Segment Driver 2)
17 RSTB Reset Signal
18 Vout Dc-Dc-Converter Output
19 A LED Backlight (Anode)
20 K LED Backlight (Cathode)
HANTRONIX, INC.
10080 BUBB RD.
CUPERTINO, CA 95014
Q.A.: REV.:
JK
1.0
HDM64GS12L-5
SHEET 3 OF 8
DATE:
1/30/03