Hantel S150PN, S450PN User Manual

Page 1
Page 2
Congratulations on your purchase of our Pager. By incorporating some of the most advanced electronic paging technologies, the is reliable and easy to use. Best of all, the is affordable and will keep you in touch with those important to you.
Please carefully read this manual before using your Pager in order to fully understand the pager's functions and capabilities. Once again, congratulations on your purchase.
Page 3
CONTENTS
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
FEATURES BUTTONS ICONS AND DESCRIPTIONS TURNING THE PAGER ON TURNING THE PAGER OFF RECEIVING AND READING MESSAGES READING LOCKED MESSAGES DUPLICATE MESSAGES CHANGING THE ALERT STATUS MEMORY CAPACITY & LOW BATTERY INDICATOR LOCKING MESSAGES DELETING INDIVIDUAL MESSAGES DELETING ALL MESSAGES SETTING THE ALARM SETTING THE DATE AND TIME AUTOMATIC ON / OFF LIGHT AND BATTERY INFORMATION CANNED MESSAGES REMINDER ALERT
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Page 4
FEATURES*
16 Message Memory Capability
9 Locked Messages
8 Different Melodies
5 Different Beeps
Vibrator
Time Stamp
Time/Date
Alarm
Automatic On/Off
Back Lighting
Deletion of All or Individual Messages
In Range Indicator
Low Battery Indicator
Duplicate Message Indicator
Unread Message Indicator
Memory Full Indicator
Reminder Alert
*Specifications are subject to change without prior notice
4
Page 5
BUTTONS
FUNCTION BUTTON
Use to Enter the Menu Mode
!
Use to Turn the Pager On
!
LAMP BUTTON
! Use to Exit the Menu Mode ! Use to Turn Light On and Off
READ BUTTON
Use to Read Messages
!
Use to Select Settings and Features
!
5
Page 6
ICONS AND DESCRIPTIONS
: Message Lock
: Duplicate Message
: Pager Off
: Change Battery
: Message Full
: Message Longer than 12 Characters
6
Page 7
TURNING THE PAGER ON*
To Turn the Pager On
Press the Function Button (pg.5) for at least two (2) seconds or longer while the pager is in the OFF mode.
< Stand by Mode >
*After inserting a battery, the pager will briefly vibrate and beep to indicate that it has entered the normal reception mode.
The Time and Date should appear on the bottom of the pager screen.
7
Page 8
TURNING THE PAGER OFF
To Turn the Pager Off
Press the Function Button (pg.5) for at least two (2) seconds to access the Function Menu. The pager will beep once and "Set Alert?" should appear on the screen. "Set Alert?" should appear on the screen.
Press the Function Button once more and "Power Off?" should appear on the screen. Press the Read Button (pg.5) to turn the pager OFF. " " should appear on the pager in the upper right hand corner of the screen.
8
Page 9
RECEIVING AND READING MESSAGES
Receiving & Reading Messages
When you receive a message, the selected alert will sound off. Select the Read Button (pg.5) to stop the alert and to read the message(s). The following information will appear: Message Number, Time Stamp and the Message. The message order will be from newest to oldest.
Reading Messages with 13 Characters or More
Messages with 13 or more characters will appear together with a symbol on the upper right hand corner of the screen. Press the Read Button to read the message in it's entirety.
9
Page 10
READING LOCKED MESSAGES
Reading Locked Messages
In order to read a locked message (s), there must be no unread messages.
Press the Function Button (pg.5) to enter into the Locked Message Read Mode. Press the Read Button to display and read all locked messages.
10
Page 11
DUPLICATE MESSAGES
Duplicate Messages
The duplicate message indicator will appear on the pager screen when the pager receives a message that is identical to a message already in the pager's memory.
11
Page 12
CHANGING THE ALERT STATUS
To Change the Alert Status
Press the Function Button (pg.5) for at least two (2) seconds or longer to access the Function Menu. The pager will beep once and "Set Alert?" will appear on the pager screen.
Press the Read Button to select the set alert mode. To scroll through the alert options, press the Function Button. The alerts will appear in the following order: Vibrator, 5 Beeps and 8 Melodies.
Press the Read Button to make a selection while the desired alert is displayed on the pager screen.
12
Page 13
MEMORY CAPACITY & LOW BATTERY INDICATOR
Memory Capacity
The has the capacity to hold sixteen (16) numeric messages.
Low Battery Indicator
When the battery capacity falls below the operational level, the low battery icon will appear and the voltage alarm tone will be activated.
13
Page 14
LOCKING MESSAGES
To Lock a Message
Select a message to be locked and then press the Function Button (pg.5). When "Lock?" appears on the pager screen, press the Read Button. This will lock the message and the screen will display "Locked".
A maximum of nine (9) messages can be locked at one time.
14
Page 15
DELETING INDIVIDUAL MESSAGES
To Delete an Individual Message
To delete unlocked message, press the Function Button (pg.5) twice (2x) while the message is displayed. When the "Delete?" message appears on the pager screen, press the Read Button to delete.
To delete a locked message, press the Function Button while the message is displayed. When the "Delete?" message appears on the pager screen, press the Read Button to delete. "Deleted" will appear on the pager screen once the message has been deleted.
15
Page 16
DELETING ALL MESSAGES
To Delete all Messages
To delete all unlocked messages, press the Function Button for at least two (2) seconds to access the Function Menu. Forward to "Delete All?" by pressing the Function Button. Press the Read Button after "Delete All?" appears on the screen. "General?" will appear, at which time you should press the Read Button to display "Really?" Confirm the deletion by pressing the Read Button again.
To delete all locked messages, press the Function Button for at least two (2) seconds to access the Function Menu. Forward to "Delete All?" by pressing the Function Button. Press the Function Button while "Delete All?" is displayed. Press the Read Button to display "Really?" Confirm the deletion by pressing the Read Button again.
16
Page 17
SETTING THE ALARM
To Set the Alarm
Press the Function Button (pg.5) for at least two (2) seconds to access the Function Menu. Forward to "Set Alarm?" by pressing the Function Button. Press the Read Button to select the Alarm Mode.
Press the Function Button to toggle between Alarm On and OFF. Press the Read Button while "Alarm On?" is displayed with the time blinking.
Press the Function Button to change the hour. To move to the next field, press the Read Button. Press the Function Button to change the minutes.
Page 18
SETTING THE DATE AND TIME
To Set the Date and Time
Press the Function Button (pg.5) for at least two (2) seconds to access the Function Menu. Forward to "Set Date?" by pressing the function Button. Press the Read Button to select the Set Time Mode.
Press the Function Button to change the month. To move to the next field, press the Read Button. Follow the same procedure to set the Time.
18
Page 19
AUTOMATIC ON/OFF*
To Enable Automatic On
To enable the Automatic On, press the Function Button for at least two (2) seconds to access the Function Menu. Forward to "Auto On/Off?" by pressing on the Function Button. Press and release the Function Button until "Auto On?" appears then press the Read Button. Press the Function Button to adjust the hour, using the Read Button to proceed through the fields. Repeat the previous step to adjust the On and Off time setting. Press the Read Button to activate your selection.
To Disable Automatic On
From the "Auto On/Off?" screen, press and release the Function Button until "Auto Off?" appears. Press the Read Button to activate your selection.
*Factory Default is 1:00 a.m. - 5:00 a.m.
19
Page 20
LIGHT AND BATTERY INFORMATION
To Turn on the Light
Press the lamp button to activate the light.
Battery Information
The is designed to operate with a “AAA” size alkaline battery. Do Not Use Carbon Zing Batteries.
20
Page 21
CANNED MESSAGES
Canned Messages
The pager comes with seven (5) pre-programmed messages which are displayed on the pager when the corresponding code is entered.
To Send a Canned Message
Dial the pager number on a telephone and wait for a beep sound. Enter the corresponding code for the desired message.
21
Page 22
Following is the list of preprogrammed canned message.
CODE
Displayed Message
1
Honey
2
Friend
3
Love you
4
Home
5
Office
REMINDER ALERT
When an unread message exists, the pager gives a periodic reminder alert (every 3 minutes) until all unread messages are read.
22
Page 23
Page 24
Loading...