Hantel S150PN, S450PN User Manual

ST 800

Congratulations on your purchase of our Pager. By
incorporating some of the most advanced electronic paging
technologies, the is reliable and easy to use. Best of all,
the is affordable and will keep you in touch with those
important to you.

Please carefully read this manual before using your Pager
in order to fully understand the pager's functions and capabilities.
Once again, congratulations on your purchase.

CONTENTS

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

FEATURES
BUTTONS
ICONS AND DESCRIPTIONS
TURNING THE PAGER ON
TURNING THE PAGER OFF
RECEIVING AND READING MESSAGES
READING LOCKED MESSAGES
DUPLICATE MESSAGES
CHANGING THE ALERT STATUS
MEMORY CAPACITY & LOW BATTERY INDICATOR
LOCKING MESSAGES
DELETING INDIVIDUAL MESSAGES
DELETING ALL MESSAGES
SETTING THE ALARM
SETTING THE DATE AND TIME
AUTOMATIC ON / OFF
LIGHT AND BATTERY INFORMATION
CANNED MESSAGES
REMINDER ALERT

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

FEATURES*

16 Message Memory Capability

9 Locked Messages

8 Different Melodies

5 Different Beeps

Vibrator

Time Stamp

Time/Date

Alarm

Automatic On/Off

Back Lighting

Deletion of All or Individual Messages

In Range Indicator

Low Battery Indicator

Duplicate Message Indicator

Unread Message Indicator

Memory Full Indicator

Reminder Alert

*Specifications are subject to change without prior notice

4

BUTTONS

FUNCTION BUTTON

Use to Enter the Menu Mode

!

Use to Turn the Pager On

!

LAMP BUTTON

! Use to Exit the Menu Mode
! Use to Turn Light On and Off

READ BUTTON

Use to Read Messages

!

Use to Select Settings and Features

!

5

ICONS AND DESCRIPTIONS

: Message Lock

: Duplicate Message

: Pager Off

: Change Battery

: Message Full

: Message Longer than 12
Characters

6

TURNING THE PAGER ON*

To Turn the Pager On

Press the Function Button (pg.5) for at least two (2)
seconds or longer while the pager is in the OFF mode.

< Stand by Mode >

*After inserting a battery, the pager will briefly vibrate and beep to indicate that it has
entered the normal reception mode.

The Time and Date should appear on the bottom of the
pager screen.

7

TURNING THE PAGER OFF

To Turn the Pager Off

Press the Function Button (pg.5) for at least two (2) seconds
to access the Function Menu. The pager will beep once and
"Set Alert?" should appear on the screen. "Set Alert?"
should appear on the screen.

Press the Function Button once more and "Power Off?"
should appear on the screen. Press the Read Button (pg.5) to
turn the pager OFF. " " should appear on the pager in the
upper right hand corner of the screen.

8