Hantek HT3003PE, HT3005PE, HT5003PE, HT3003PF, HT3005PF User guide
...
REGULATED DC POWER SUPPLY
HT3003PE; HT3005PE; HT5003PE;
HT3003PF; HT3005PF;
HT3003PG; HT3005PG
INSTRUCTION MANUAL
Content
SAFETY SUMMARY .................................................................... 1
INSTRUCTIONS .......................................................................... 2
WARRANTY ................................................................................. 3
1. GENERAL ................................................................................ 4
2. PRECAUTIONS ....................................................................... 5
3. SPECIFICATIONS .................................................................... 8
4. PANEL DETAILS – SINGLE TYPE ........................................... 9
5. DESCRIPTION OF PANEL FUNCTION – SINGLE TYPE ...... 10
6. OPERATIONS PROCEDURES – SINGLE TYPE ................... 11
8. DESCRIPTION OF PANEL FUNCTION – DUAL TYPE .......... 15
9. OPERATION PROCEDURES – DUAL TYPE ......................... 17
10. NOTES ON ENVIRONMENTAL CONDITION ...................... 21
11. NOTICES .............................................................................. 22
SAFETY SUMMARY
Safety Precautions
Please take a moment to review these safety precautions.
They are provided for your protection and to prevent damage to the
power supply.
This safety information applies to all operator and service personnel.
※NOTE: If the equipment is used in a manner not specified by the
manufacture, the protection provided by the equipment may be
impaired.
Caution and Warning Statements
CAUTION: Is used to indicate correct operating or maintenance
procedures in order to prevent damage to or destruction of equipment
or other property.
WARNING: Calls attention to a potential danger that requires correct
procedures or practices in order to prevent personal injury.
SYMBOLS:
Caution (refer to accompanying documents)
Protective conductor terminal
1
INSTRUCTIONS
1. To maintain the precision and the reliability of the product, use it in
the standard settings
Operating temperature: 5 ~ +40℃℃
Operating humidity: 50% ~ 80%
Storage temperature: 0 ~ 70℃℃
Storage humidity: less than 85%
2. For quality improvement, the exterior design and specifications of
the product can be changed without notice.
2
WARRANTY
Warranty service covers one year the date of original purchase.
In case of technical failure within a year, repair service will be
provided by our service center or sales outlet free of charge.
We charge for repairs after the one-year warranty period expires.
When the failure is a result of user’s neglect, natural disaster or
accident, we charge for repairs regardless of the warranty period.
For more professional repair service, be sure to contact our service
center or sales outlet.
3
1. GENERAL
HT3000PE/PF/PG series Regulated DC Power Supply comprises
the following models:
HT3003PE: Single 0~30V, 0~3A
HT3005PE: Single 0~30V, 0~5A
HT5003PE: Single 0~50V, 0~3A
HT3003PF: Dual 0~30V, 0~3A
HT3005PF: Dual 0~30V, 0~5A
HT3003PG: Dual 0~30V, 0~3A and Fixed 5V, 3A
HT3005PG: Dual 0~30V, 0~5A and Fixed 5V, 3A
It features low ripple and high stability.
Main features for the above models are as follows:
1)
Utilizes SMT technology.
LCD display to show voltage and current.
2)
LCD display to show regulated voltage and current.
3)
Green/Amber LCD back-light selectable.
4)
5) Auto interchangeable of regulated voltage and current.
6)
Multi-turn variable device to provide high precision voltage
setting.
7)
Step-by-step current limit setting.
Auto-tracking on PARALLEL and SERIAL working condition.
8)
Extended output terminal connection.
9)
Continuously working under full loaded condition.
10)
4 5
2. PRECAUTIONS
2-1. Exchange Method of fuse
If you wish to change FUSE F1, please use driver and pull it over
as per drawing.
Fig 1
Line Voltage Selection and Fuse Ratings
Model Line Voltage Mark Position Fuse Rating (250V)
HT3003PE
HT3005PE
HT5003PE
HT3003PF
HT3005PF
HT3003PG
HT3005PG
AC 220V 220V 1.6AL
AC 110V 110V 3AL
AC 220V 220V 2AL
AC 110V 110V 4AL
AC 220V 220V 2AL
AC 110V 110V 4AL
AC 220V 220V 3.15AL
AC 110V 110V 6AL
AC 220V 220V 4AL
AC 110V 110V 8AL
AC 220V 220V 3.15AL
AC 110V 110V 6AL
AC 220V 220V 4AL
AC 110V 110V 8AL
2-2. Installation and Handling Precautions
When placing the Power Supply in service at your workplace,
observe the following precautions for best instrument performance
and longest service life.
1.Avoid placing this instrument in an extremely hot or cold place.
Specifically, don’t leave this instrument in a closed car, exposed to
sunlight in midsummer, or next to a space heater.
2. Don’t use this instrument immediately after bringing it in from the
cold. Allow time for it to warm to room temperature. Similarly don’t
move it from a warm place to a very cold place, as condensation
might impair its operation.
3. Do not expose the instrument to wet or dust environments.
4. Do not place liquid-filled containers (such as coffee cups) on top
of this instrument.
A spill could seriously damage the instrument.
5. Do not use this instrument where it is subject to serve vibration,
or strong blows.
6. Do not place heavy objects on the case, or otherwise block the
ventilation holes.
7. Do not use this Power Supply in strong magnetic fields, such as
near motors.
8. Do not insert wires, tools, etc, through the ventilation holes.
9. Do not leave a hot soldering iron near the instrument.
10. Do not place this instrument face down on the ground, or damage
to the knobs may result.
11. Do not connect other power source to +.- of the output terminal.
6
Loading...