Hantech WG100U Users Manual

WL0115 USER MANUAL

USB Wireless LAN Adapter User Manual

1 Install the driver
a Insert the installation CD into your CD-ROM driver, Double

click the icon to start setup

b Click Yes to go on

c It’s recommended to choice Optimize for performance mode

click next to go on

1

WL0115 USER MANUAL

d
e Click Finish to end the setup

2 Plug in your usb wireless LAN adapter, it will be recognized
and auto installed. Just confirmed it like below:

3 Make infrastructure connection

 Double click the icon in red circle

2

WL0115 USER MANUAL

 You will see:

 You can click the button Rescan to find which AP is in range,

they will show on the window, choice one you want to
connect, and click the button connect, and click ok to finish
the connection operation.

 An infrastructure connection is accomplished.

 Note, please choose correct channel setting up to your law,

for example, ch13 is permitted in your country, and you set
your router at ch13, while you choose ch1-ch11 (default
setting), you will never find the AP, and you will have to
choose ch1-ch13 setting in Advanced page as below

3