Hans Turck and KG TNLRQ80L400 User Manual

read/write head
TNLR-Q80L400-H1147

Type code TNLR-Q80L400-H1147

Ident no. 7030204

Mounting conditions non-flush, flush mountable
Ambient temperature -25…+70 °C

■ For roller conveyors

■ Rectangular, 80 x 400 mm, height 25

mm

■ Active face on top

■ Plastic, PBT-GF30-V0

■ Powered and operated only via BL ident

interface module

■ Male M12 x 1, only for use with BL ident

extension cable

Connectors …/S2503

Connectors …/S2500

Operating voltage 19.2…28.8VDC

DC rated operational current
Data transfer inductive coupling
Operating frequency 13.56 MHz
Radio communication and protocol standards ISO 15693
Read/write distance max. 345 mm
Output function 4-wire, read/write

Construction rectangular, Q80L400
Dimensions 400x 80x 25mm
Housing material plastic, PBT, black
Material active area plastic, Black

Connection male, M12 x 1
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
IP Rating IP67
MTTF 121 years acc. to SN 29500 (Ed. 99) 40 °C
Power-on indication LED green
Diagnostic display Functional description of yellow range-restrict-

Edition • 2015-08-27T10:30:11+02:00

1 / 7 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. [phone] ñ Fax [phone] ñ [e-mail] ñ www.turck.com

ð 230 mA

ed LED: If the read/write head is supplied
with voltage, it briefly checks to see whether
its resonance frequency is affected by sur­rounding metal. If this is the case, the reso­nant circuit off-tunes its frequency to reach
again the (optimum) resonance frequency.
However, this is only possible within a cer­tain range. If too much metal is in the envi­ronment, the read/write head cannot re-tune
or the surrounding metal takes too much en­ergy from the field and due to the reduced
range the communication between the read/
write head and the data carrier is cut off (the
orange range-restricted-LED lights up). If the
LED is off, this does not mean conversely,
that no reduction in range occurs. The lit LED
is rather an indication of too much metal in
the environment and a greatly reduced range
(about 50% less).

Connectors …/S2501

Functional principle

The HF read/write heads operating at a fre­quency of 13.56 MHz form a transmission
zone the size of which (0…500 mm) varies,
depending on the combination of read/write
head and data carrier.

The read/write distances mentioned here on­ly represent standard values measured under
laboratory conditions.

The read/write distances of the data carriers
for mounting in metal TW-R**-M(MF) were de­termined in metal.

Attainable distances may vary by up to 30 %
due to component tolerances, mounting con­ditions, ambient conditions and material quali­ties (especially when mounted in metal)

Testing of the application under real operat­ing conditions is therefore essential, especial­ly with read/write on-the-fly!

read/write head
TNLR-Q80L400-H1147

Packaged quantity 1

Special features For roller conveyors (vertical or horizontal ori-

entation)

Edition • 2015-08-27T10:30:11+02:00

2 / 7 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. [phone] ñ Fax [phone] ñ [e-mail] ñ www.turck.com

read/write head
TNLR-Q80L400-H1147

Data carrier

Dimensions Type designation Read-write distance Transfer zone Minimum dis-

Ident - no. Recommend-

ed (mm)

TW-R16-B128

6900501

TW-R20-B128

6900502

TW-R20-K2

6900505

50 95 74 205 240

60 102 86 202 240

15 64 70 195 240

max. [mm] length

max. [mm]

width offset

max. [mm]

tance between

two read-

write heads

[mm]

TW-R30-B128

6900503

TW-R30-K2

6900506

TW-R50-B128

6900504

TW-R50-K2

6900507

TW-L49-46-F-B128

7030390

90 152 132 217 240

70 122 100 208 240

150 256 230 242 240

120 216 190 233 240

74 176 149 197 240

Edition • 2015-08-27T10:30:11+02:00

3 / 7 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. [phone] ñ Fax [phone] ñ [e-mail] ñ www.turck.com

read/write head
TNLR-Q80L400-H1147

Data carrier

Dimensions Type designation Read-write distance Transfer zone Minimum dis-

Ident - no. Recommend-

ed (mm)

TW-L80-50-P-B128

7030389

TW-R80-M-B128

7030207

TW-R80-M-K2

7030205

136 229 204 207 240

40 77 56 199 240

30 77 64 195 240

max. [mm] length

max. [mm]

width offset

max. [mm]

tance between

two read-

write heads

[mm]

TW-L86-54-C-B128

6900479

200 345 306 242 240

Edition • 2015-08-27T10:30:11+02:00

4 / 7 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. [phone] ñ Fax [phone] ñ [e-mail] ñ www.turck.com

read/write head
TNLR-Q80L400-H1147

Data carrier longitudinal approach

Dimensions Type designation Read-write distance Transfer zone Minimum dis-

Ident - no. Recommend-

ed (mm)

TW-R16-B128

6900501

TW-R20-B128

6900502

TW-R20-K2

6900505

30 95 410 37 240

40 102 404 43 240

30 64 390 35 240

max. [mm] length

max. [mm]

width offset

max. [mm]

tance between

two read-

write heads

[mm]

TW-R30-B128

6900503

TW-R30-K2

6900506

TW-R50-B128

6900504

TW-R50-K2

6900507

TW-R50-90-HT-B128

1542326

TW-R50-90-HT-K2

1542329

60 152 434 66 240

50 122 416 50 240

100 256 484 115 240

90 216 466 95 240

70 226 484 115 240

60 186 466 95 240

Edition • 2015-08-27T10:30:11+02:00

5 / 7 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. [phone] ñ Fax [phone] ñ [e-mail] ñ www.turck.com