Hansol D19BL, 920D User Manual




User’s Guide

920D+(D19BL)

COLOR MONITOR

Regulatory Information.......................................................................................................................... 2

Introduction

Features ...................................................................................................................................................3

Controls

OSD Controls ...........................................................................................................................................4

OSD Menus .............................................................................................................................................. 5

Power Management Feature................................................................................................................. 8

Standard Signal Table ............................................................................................................................ 8

Specifications ..........................................................................................................................................9

Pin assignment table D-Sub Mini 15pin connector ...................................................................... 10

Troubleshooting .....................................................................................................................................11

Table of Contents

Color Monitor

2

 Regulatory

Information

- FCC Information

Caution

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

- Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.

- Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du

Canada.

- Energy Star As an ENERGY STAR partner, Hansol Electronics Inc. has determined that this product meets energy Star

guidelines for energy efficiency.

Notice

The information contained in this document is subject to change without notice.

This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment can generates, uses, and radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause unacceptable interference to radio and television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures.

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced Radio/TV technician for help.

Color Monitor

3

 Introduction

- Features  19-inch (18 inch visual) high performance display color monitor

 Automatically scans frequencies from

- Horizontal frequency: 30 to 96KHz

- Vertical frequency: 50 to 160Hz

 Compatible with VGA, SVGA, VESA, MAC Standards and maximum resolution modes up to 1600 × 1200

 Supports VESA flicker free modes including 85Hz refresh rate.

 On Screen menu fingertip control system to visually select and adjust screen images using control buttons on

front panel and on screen menus.

 Power supply operates on AC 100-240V( ± 10%), 50/60Hz for use all over the world.

 Power supply operates on AC 220-240V( ± 10%), 50/60Hz for use all over the world.(Europe Version)

 Equipped with DDC 2B for Plug & Play capability.

 Equipped with an energy-saving feature.

Power management circuit signaled by the computer system, will reduce power consumption when the
computer system is not in use.

 Monitors with nonglare/antistatic screens are compliant with MPR

1990 Emissions standards and meets requirements for CE Marking.
※ TCO : (option)

Color Monitor

4

 Controls

- OSD controls

Accessing OSD

Press MENU Button.

 － : Direct Brightness access.
 + : Direct Contrast access.

EXIT from OSD

 : Press this ( ) button in the main menu and submenu.

Additional front controls

※ Power Switch : Turn the monitor power on or off, When the power is on, the LED is lit.

The OSD apears on the screen when you press MENU button.
“ON SCREEN MENU” controls include the following extended controls such as Size, Position, Geometry
Distortion, Color Temp., Degauss, Moire on & off, Language, OSD-Position, Recall, Cont. & Brt., etc.