Hans Grohe 38850XX1 User Manual

Installation Instructions / Warranty

Uno

38850XX1

Technical Data

Maximum incoming water pressure 90 PSI
Recommended incoming water pressure 20-60 PSI
Maximum incoming hot water temperature 120o F*
Flow Rate 2.5 GPM

*To protect bathers from scalding, many municipalities require that the water heater be set below 120o F. There may also be local codes
concerning the maximum output temperature of the shower valve. Please know and follow all applicable local codes.

Eco spray

Normal spray

Soft spray

From the function is guaranteed.

Installation Instructions

Install the screen washer between the handshower
and the hose. This will protect the handshower
from debris in the water line.

Depending on local water conditions, you may
need to occasionally remove and clean the screen
washer. UNDER NO CIRCUMSTANCES SHOULD THE SCREEN

BE PERMANENTLY REMOVED.

WASHER