Hans Grohe 38830XX1 User Manual

Installation Instructions / Warranty

Uno

2

38830XX1

2

Uno2 Sink Mixer

38830XX1

Technical Specification

Flow rate 2.2 gpm
Max. incoming water pressure 145 psi
Recommended incoming water pressure 14.5 - 72 psi
Max. incoming hot water temp 176

o

F*

Recommended incoming hot water temp 120

o

F - 140oF*
Hole size in mounting surface 1 1/4”
Maximum mounting surface thickness 2 3/8”
Maximum mounting surface thickness with extension 2 7/8”

*know and follow all applicable local plumbing codes when setting the temperature on the water heater.

Installation Considerations

Be sure that you have all tools and supplies necessary before beginning the installation.
The supply hoses on this faucet require supply stops with 3/8” compression fittings (not included).
Confirm that there is sufficient space to the rear of the faucet for the movement of the handle.
Installer - please leave this booklet for the homeowner as it contains important information about

the faucet.

3

Installation

If the countertop is less than 1 3/8”, install the faucet
with the gray plastic spacer, fiber washer, metal
washer and mounting nut.

If the countertop is greater than 1 3/8”, install the
faucet without the spacer.

If the countertop is greater than 2 3/8”, install the
shaft extension.

1

2

3