Hans Grohe 38025XX1, 38210XX1, 38020XX1 User Manual

Installation Instructions / Warranty

Uno²

38020XX1
38025XX1
38210XX1

90540401 2/2005

Uno single control lavatory faucet 38020XX1
Uno tall single control lavatory faucet 38025XX1
Uno single control bidet faucet 38210XX1

Technical Specification

Maximum water pressure 145 psi
Recommended water pressure 14.5 - 72 psi
Maximum hot water temp. 176o*
Recommended hot water temp 120o - 140o*
Max. flow rate @ 45 psi 2.2 gpm
Max. deck thickness 1 3/8”
Hole size in deck 1 3/8”

*Many municipalities require that the water heater be set
no higher than 120o. Please know and follow all
applicable plumbing codes when setting the temperature on
the water heater.

Installation considerations:

This unit should be installed by a licensed
professional plumber.

The supply hoses installed on this
unit connect to the supply stops with
standard 3/8” compression fittings.

Supply stops and 3/8” compression fittings
are not included.

Bidet faucet 38210XX1 is not for use on a
bidet with a vertical spray.

2

Installation Instructions

• Sit the faucet with black sealing ring in
the faucet hole on top of the mounting
surface.

• From beneath, install the friction washer,
metal washer, and mounting nut. Tighten
the mounting nut, taking care not to
overtighten.

• Check the position of the faucet. When
satisfied, use a slot-headed screwdriver to
tighten the tensioning screws.

sealing ring

friction washer

• Feed the pull rod through the hole in the
back of the faucet body.

• Attach the supply lines to the supply stops
with standard 3/8" compression fittings
(not included). Push the compression nut
and ferrule over the hose shank. Push the
hose shank into the supply stop. Tighten
the compression nut wrench tight.

Replacement Parts

1 handle 38094XXX

1.1 screw cover 96762000

1.2 set screw 96029000

2 flange 96763XXX
3 nut 97209000
4 cartridge 96764000
5 seal 95008000
6 aerator 97370XXX
7 fixing set 13961000
8 pull rod 96657000
9 ball joint 96050XXX
10 aerator 94005XXX

8

1.1

1.2

metal
washer

mounting
nut

tensioning
screws

1

2

3

4

5

9

6

7

10

3