Hans Grohe 37200XX1, 37028XX1, 37001XX1 User Manual
HANSGROHE PRODUCT SERVICE
SINGLE LEVER LAV MIXER
SINGEL LEVER BIDET MIXER
SINGLE LEVER LAV MIXER Highriser
Ref. No.: 37001XX1/37200XX1/
37020XX1/37028XX1
Installation
Terrano
Assembly
1. Flush pipe lines thoroughly.
2. Place the mixer including the rubber sealing washer in position on the basin.
3. Slip the mounting nut including the washer over the threaded pin and tighten the nut.
4. Connect the supply pipes to the supply valves: hot-left; cold-right.
5. Connect the pop-up rod to the pop-up waste assembly.
Operation
Turn on by lifting handle.
Swivel to the left: hot water
Swivel to the right: cold water.
Large differences in pressure between the hot and cold water supply should be balanced.
Technical data
hot cold
Lav mixer 37001XX1
Operating pressure : max. 147 psi
Recommended operating pressure : 14.7 - 72.5 psi
Test pressure : 232 psi
Hot water temperature : max. 176° F
Recommended hot water temperature : 149° F
Bidet mixer 37200XX1
Hole size in basin:
Minimum: 1 1/4"
Maximum: 1 5/8"
Lav mixer Highriser 37020XX1
Lav mixer Highriser 37028XX1 without
lift rod and pop-up waste
11/04
HANSGROHE PRODUCT SERVICE
Spare parts
1
1.1
1.1 screw cover 96338000
2 flange cpl. 96394XXX
3 cartridge cpl. 96339000
4 aerator cpl. 96336000
5 fixation cpl. 13961000
1 handle 37091XXX
2
6 connection hose
30668710
7 lift rod
8 aerator cpl. 94005XXX
3
XXX = Colors
000 chrome plated
810 satinox
®
4
Mounting
7
5
8
max. 1¾"
6
Cleaning Recommendation for Hansgrohe Products
Modern faucetry and shower products utilize a combination of materials to
comply with the needs of the market with regard to design and functionality.
To avoid damage, it is necessary to use some caution when cleaning. Damage
caused by improper treatment is not covered under the Hansgrohe warranty.
Cleaning Materials for Faucets and Showers
• To remove lime scale, use only products made specifically for that purpose.
Always follow the manufacturer’s instructions when using.
• Do not use cleaners that contain hydrochloric, formic, acetic, or phosphoric
acids, as these will cause considerable damage to finishes and to plastic
components.
• Never mix cleaning materials.
• Never use cleaners containing abrasives. Do not use abrasive cleaning
cloths, pads, or sponges.
Cleaning Procedures
• Clean your faucets and shower products as and when required. Regular
cleaning will prevent scale buildup and water spotting.
• Follow the label instructions. Do not allow any cleaner to remain on the
product for longer than necessary.
• When using spray cleaners, spray first onto a sponge or cloth – do not
spray directly onto the product.
• After cleaning, rinse thoroughly with clear water to remove any cleaner
residue.
Important
• Soap and shampoo residue can also cause damage to the product. Rinse
well with clean water after use.
• If the surface is already damaged, harsh cleaning materials will cause
further damage.
Flow chart
gpm
2,5
2,0
1,5
1,0
0,5
0
0 15 30 45 60 75
psi
Lav mixer 37001XX1 / Bidet mixer 37200XX1/
Lav mixer Highriser 37020XX1 / 37028XX1
11/04
Loading...