Hansgrohe 32040821 Assembly manual
Installation Instructions / Warranty
Talis
32040XX1
32240XX1
2
Talis Lavatory Faucet 32040XX1
Talis Bidet Faucet 32240XX1
32040XX1 32240XX1
Technical Data
Maximum flow rate 2.2 gpm
Operating pressure: max. 145 psi
Recommended operating pressure:
Test pressure: 232 psi
Hot water temperature: max. 176° F*
Recommended hot water temp.: 120° - 140° F*
Hole size in mounting surface 1 1/4”
Max. mounting surface depth: 1 5/8”
3/8” supply hoses require stops with 3/8” compression
fittings (not included)
The bidet faucet is not for use on a bidet with a vertical spray.
*Please know and follow all applicable local plumbing codes
when setting the temperature on the water heater.
14.5 - 72 psi
Caution:
Do not bend or twist
the supply hoses!
Installation
Flush the hot and cold supplies thoroughly before
installing the faucet!
Place the faucet and sealing washer on the mounting surface.
If the mounting surface is less than 3/16” thick,
trim the sealing washer so that it is even with the
bottom of the mounting surface.
From beneath the mounting surface, install the slide
washer and collar nut. Tighten the collar nut by
hand.
slide washer
collar nut
3
Loading...