Hans Grohe 31711001, 31721001, 31701001 User Manual
Installation Instructions / Warranty
Focus
31701001
31711001
Focus
31721001
2
Focus Lavatory Faucet
31701001
Focus Bidet Faucet
31721001
31701001 31721001
Technical Specification
Recommended water pressure 22 - 72 PSI
Recommended hot water temp. 120° - 140°F*
Hole size in mounting surface 1 3/8”
Maximum mounting surface thickness 1 5/8”
Flow rate 2.2 gpm max.
3/8” supply hoses – requires 3/8” compression
fittings (not included)
Bidet mixer 31721001 is not intended for use on a
bidet with a vertical spray.
For best results, Hansgrohe recommends installation
by a licensed professional plumber.
*Please know and follow all applicable local codes when setting the
temperature on the water heater. In Massachusetts, the water heater may be
31711001
set no higher than 112°F.
Installation
Place the faucet and the sealing ring on the countertop.
From below, install the mounting washer on the mounting
bolt. Install and tighten the mounting collar.
sealing ring
mounting washer
mounting bolt
mounting collar
Attach the hoses to the supply stops with 3/8” compression fittings (not included). Use two wrenches, as shown,
to prevent the hoses from twisting or from becoming
loose.
Install the pop-up drain (see page 4).
Turn on the water and check all connections for leaks.
3
Loading...