Hansgrohe 10801001 Installation manual

HANSGROHE PRODUCT SERVICE

SINGLE LEVER KITCHEN MIXER

Ref. No.: 10800XX1

10801XX1

Installation
Starck

Assembly

1. Flush pipe lines thoroughly.

2. Place the mixer including the sealing washer in position on the sink.

3. Slip the slide washer, washer and collar nut over the flexible hoses and threaded base and tighten the collar nut by hand.

4. Tighten screws.

5. Connect the flexible supply hoses to the angle valves: hot-left; cold-right.

Operation

Turn on by lifting handle.
Swivel to the left: hot water
Swivel to the right: cold water.

Large differences in pressure between the hot and cold water supply should be balanced.

All single lever mixers can be used in conjuction with water heaters and instantaneous water heaters if the flow pressure is at least 22 psi.

Technical data Flow chart

2,5

2,0

1,5

gpm

1,0

0,5

Starck 10800XX1 Starck 10801XX1

Operating pressure : max. 145 psi
Recommended operating pressure : 14.5 - 72.5 psi
Test pressure : 232 psi
Hot water temperature : max. 176° F
Recommended hot water temperature: 149° F

0

0 15 30 45 60
75

psi
Hole size in deck:
Minimum: 1 1/4"
Maximum: 1 3/8"

HANSGROHE PRODUCT SERVICE

Spare parts

1 Flange 96427XXX

1

3

2

4

6

5

2 Handle with cartridge 95052XXX

3 Handle "Puro" 10891XXX

4 Cartridge 96339000

5 Aerator cpl. 13085000

6 Washer 95053000

7 Connection hose 94071000

8 Fixation cpl. 13961000

Color code: - 000 chrome

- 810 satinox

7

8

Cleaning instructions:

· Clean with a liquid domestic cleaner or with soap suds. Afterwards rinse with clear water and polish with a cloth.

· Do not use any cleaning agents containing acid or scouring agents.

· Damage caused by improper treatment is not subject to our guarantee.