Installation Instructions / Warranty
E
04060XX0
S
04058XX0
Deck-mounted Pot Filler S 04058XX0
Deck-mounted Pot Filler E 04060XX0
04058XX0
04060XX0
2
Technical Information
Recommended water pressure 14.7 - 72.5 psi
Hole size in mounting surface 1-1/8"-- 1 3/8"
Max. mounting surface depth 2 3/4"
Flow rate 2.2 gpm
Requires 1/2 NPSM connection hose (not included)
This faucet is intended for cold water only.
Installation Considerations
For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
•
sional plumber.
Please read over these instructions thoroughly before beginning installation. Make sure
•
that you have all tools and supplies needed to complete the installation.
A countertop having a thickness of 3/4" or less should be reinforced to distribute the
•
weight of the pot filler.
Do not use plumbers putty. Seal the underside of the escutcheon with silicone sealant if
•
desired.
Allow sufficient space for the
•
escutcheon. There should be a minimum 1
1/2" between the center line of the mounting
hole and the wall or backsplash.
3