Hanover X56WMEF1BLK, X56WMEF1WHT Installation And Operation Instructions Manual
Installation and Operation Instructions
ELECTRIC FIREPLACE
X56WMEF1BLK X56WMEF1WHT
Important Safety Instructions
Listing Approvals
Glass Particles Installation Instructions
2
2-3
5
6
7-8
9-10
11
11
12
12
3-4
Tool list
Assembly Instructions
Operating Instructions
Remote Control Instructions
Temperature Limiting Control
Trouble Shooting
12
Cleaning
Installation
1
Product Dimensions
Tool List: drill bit, drill, tape measure and pencil.
Remote Control Electric Wall-Mount Fireplace
Assembly Instructions
X56WMEF1BLK X56WMEF1WHT
Quick Reference Guide
1.
(1) Fireplace assembly
1PC
(2) Steel holder
1PC
(3) Remote Control
1PCS
(4) Screw
8 PCS
4mm x 40mm
Care and Cleaning Instructions:
Replace the faux fire log set with glass particles:
Remove the glass pane, then replace the faux fire
log set with glass particles.
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the
surface with rough or abrasive objects.
Assembly Tool Required
Phillips Screwdriver
RGB
glass particles
Suggested tools: Phillip head screw driver, power drill, drill bit, and a tape
measure. Unit needs to be hung on wall stud for more security and stability.
Prior to plugging your heater into a power outlet, first verify that the circuit breaker
for the outlet is on.
2
2. The heater may emit a slight, harmless odour when first used. This odour is
normal and it is caused by the initial heating of internal heater parts and will not
occur again.
3. If the heater does not emit heat, Consult your User’s Guide for further
information.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN THE UNIT
NO USER-SERVICEABLE PARTS INSIDE
HIGH TEMPERATURE
KEEP ELECTRICAL CORDS, DRAPERY AND OTHER FURNISHINGS AT LEAST 1 METRE / 3 FEET
FROM FRONT AND SIDES OF THE HEATER.
WARNING
RISK OF FIRE - KEEP COMBUSTIBLE MATERIAL AWAY FROM TOP OF HEATER.
SERVICING SHOULD BE DONE ONLY WHILE THE HEATER IS UNPLUGGED FROM
POWER SUPPLY.
The flame effect on the wall hanging fireplace is created by LED surface mounted
components that are designed to last the life of the product. Do not remove back cover of
heater, no user serviceable parts are contained within.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, to reduce the risk of fire, electric shock and injury to persons, basic precautions
should always be followed, including the following:
.
1. Read all instructions before use.
2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided use
handle when moving this heater.
3. Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least
4" / 7cm away from the front of heater and keep them away from the sides of heater.
4. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the
3
Loading...