How it Works
HannStar
Loading...
HSD280MUW1-A00
Specification
26 pgs892.07 Kb0

HannStar HSD280MUW1-A00 Specification

Download
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 1 / 26
To : ෡ౙ
Date : May., 05, 2009
Formal Specification
Model : HSD280MUW1
- A**
Note:
1.Please contact Hannstar Display Corp. before designing your product based on this module specification.
2.The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by Hannstar for any intellectual property claims or other problems that may result from application based on the module described herein.
3.The mark “ ** ” of Model means sub-model code.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 2 / 26
Record of Revisions
Rev. Date Sub-Model Description of change
1.0 Jan.29.2007 -A00 Formal specification for HSD280MUW1-A was first issued.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 3 / 26
Contents
1.0 General Descriptions ………………………………………..p.4
2.0 Absolute Maximum Ratings ………………………….. p.5
3.0 Optical Characteristics ……………………………….. p.7
4.0 Block Diagram ………………………………………………. p.11
5.0 I/O Connection Pin Assignment …………………………… p.14
6.0 Electrical Characteristics ………………….……………… p.16
7.0 Outline Dimension …………………………….……………. p.21
8.0 Lot Mark ……………………………………………………… p.23
9.0 Package Specification ……………………………...………. p.24
10.0 General Precaution …………………………………………. p.25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 4 / 26
1.0 GENERAL DESCRIPTIONS
1.1 Introduction
HannStar Display model HSD280MUW1-A is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, the voltage reference, common voltage, DC-DC converter, column, and row driver circuit. This TFT LCD has a 28-inch diagonally measured active display area with WUXGA resolution (1920 vertical by 1200 horizontal pixel array).
1.2 Features
Ŷ 28” WUXGA TN mode TFT LCD panel Ŷ High speed response time Ŷ Supported WUXGA (H: 1920 pixels, V: 1200 lines) resolution Ŷ With LCD Timing Controller Ŷ RoHS compatible Ŷ With inverter
1.3 General information
Item Specification Unit
Outline dimension 629.0 417.0 30.0 (typ.) mm
Display area 593.28 (H) x370.8 (V) mm
Number of Pixel 1920(H) x 1200(V) Pixels
Pixel pitch 0.309(H) x 0.309(V) mm
Pixel arrangement RGB Vertical stripe
Display color 16.7M (6-bit+HiFRC)
Display mode Normally white
Surface treatment Antiglare, Hard-Coating (3H)
Tr + Tf 5 (TYP.)
Response Time
Msec
GTG 3 (TYP.)
Weight 4800 G
Input signal 2-ch LVDS
Logic system 6.2 (TYP.) W
Power consumption
B/L system 75 (TYP) W
1.4 Applications
Ŷ Desktop and Multi-function monitors Ŷ Display terminals for AV applications Ŷ Monitors for industrial applications
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
HSD280MUW1- A Formal Specification
Page No. 5 / 26
Document No. Revision 1.0
1.5 Mechanical Information
Item Min. Typ. Max. Unit
Horizontal(H) 628.0 629.0 630.0 mm
Module Size
Vertical(V) 416.0 417.0 418.0 mm
Depth(D) 29.5 30.0 30.5 mm
Weight (With Inverter) 4600 4800 5000 g
Torque of customer screw hole 3.0 Kgf*Cm
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item Symbol Min. Max. Unit Note
Storage temperature T
Operating temperature T
Vibration (non-operating) V
Shock (non-operating) S
Storage humidity H
Operating humidity HOP 10 80 %RH (4)
Low pressure (operating) P
Low pressure (non-operating) P
Note (1) Storage /Operating temperature
-20 60 oC
STG
0 50 oC (1)
OPR
-- 1.5 G (2)
NOP
-- 50 G (3)
NOP
10 90 %RH (3)
STG
697 -- HPa (5)
LOP
116 -- HPa (6)
LNOP
Humidity (%)
100
90
80
Operating Range
0
Temperature (
20 40 60
o
C)
50
65
Storage Range
-20-40
60
40
20
10
0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 6 / 26
(2) 10-500Hz sine wave, X,Y,Z each directions, 30min/cycle. (3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test, It is necessary to fill the silicon rubber between the shock jigs as buffer.
o
(4) Max wet bulb temp. =39
C (5) 2 hrs. (10000 feet) (6) 24hrs. (50000 feet)
2.2 Electrical Absolute Rating:
2.2.1 TFT LCD Module:
Item Symbol Min. Max. Unit. Note
Power supply Voltage VDD -0.3 6.0
V(DC)
(1)(2)
2.2.2 Inverter Unit:
Item Symbol Min. Max. Unit Note
Power supply Voltage / Inverter
Vin 21.6 26.4
V (1)(2)
B/L On/Off Control Input Voltage ON/OFF 2.5 5.0 V (1)(2)
Brightness Control Input Voltage V
0 5.0
BRT
V (1)(2)
Note: (1) Permanent damage may occur to the LCD module if beyond this specification.
Functional operation should be restricted to the conditions described under Normal
Operating Conditions.
(2) Within Ta=25±2°C
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 7 / 26
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR 600 800 -- (1)(2)
Response time
White luminance (center of screen)
Color chromaticity (CIE1931)
Viewing angle
Brightness uniformity B
Rising TR --
5
Falling TF --
Red
Gree
n
Y
L
Rx
Ry
Gx
Gy
Bx
o
Ә
=0
o
φ=0
Normal
viewing
400 500 cd/m
0.620 0.650 0.680
0.300 0.330 0.360
0.270 0.300 0.330
0.590 0.620 0.650
0.110 0.140 0.170
(Tr+Tf)
10
(Tr+Tf)
Blue
By
Wx
0.035 0.065 0.095
0.280 0.310 0.340
White
0.300 0.330 0.360
75 85 --
75 85 --
75 80 --
75 80 --
o
75 -- -- % (6)
Hor.
Ver.
Wy
Ә Ә Ә
Ә
UNI
L
R
H
L
CR>10
Ә
=0
o
φ=0
msec (1)(3)
(1)(4)(7)
2
(IL=6.5mA)
(1)(5)
3.2 Measuring Condition
Ŷ Measuring surrounding: dark room Ŷ Lamp current I Ŷ V
=5.0V, Ibl=6.5mA, fV=60Hz, f
DD1
Ŷ Surrounding temperature: 25±2
: Inverter: JST PHR-12
BL
DCLK
o
C
=77MHz
Ŷ 30min. Warm-up time.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 8 / 26
3.3 Measuring Equipment
Ŷ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and
BM-5A for other optical characteristics.
Ŷ Measuring spot size : 20~21mm
Note (1) Definition of Viewing Angle:
ӥ
H
12’ o’clock
o
R
Ә
ӥH=90
L
Ә
ӘL=90
o
ӥ
L
6’ o’clock
ӥL=90
Note (2) Definition of Contrast Ratio(CR) :
measured at the center point of panel
Luminance with all pixels white (L255) CR = Luminance with all pixels black (L0)
o
ӘR=90
o
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
HSD280MUW1- A Formal Specification
Page No. 9 / 26
Document No. Revision 1.0
Note (3) Definition of Response Time: Sum of TR and T
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
R
100%
90%
F
T
F
Optical
response
10%
0%
time
Note (4) Optical characteristic measurement setup
LCD Panel
120cm
Field = 1
o
Photo-detector (BM-5A)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
Note (5) Definition of Center Luminance of White Center Luminance= Y1
1/10 H
HSD280MUW1- A Formal Specification
Page No. 10 / 26
1/10H
1/2H
1/10V
Y1
1/2V
1/10V
Note (6) Definition of brightness uniformity
(Min Luminance of 9 points)
Luminance uniformity = x 100%
(Max Luminance of 9 points)
10The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 11 / 26
4.0 BLOCK DIAGRAM
4.1 LCD Module Block Diagram:
X-driver IC
TCON with
LVDS receive r
Liquid Crystal Panel
Connector CN1
DC/DC
Y-dr i ve r IC
Converter
1920
1200 pixels
Y-dr i ve r IC
CN1
Inverter Connect
Gamma
Reference
Voltage
Generator
INVERTER
LAMP
11The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
HSD280MUW1- A Formal Specification
Page No. 12 / 26
Document No. Revision 1.0
4.2 Pixel Format
1,1
(odd)
2,1
(odd)
1200
,1
1,2
(even)
1,3
(odd)
1,4
(even)
R
R
1920 Pixels
LCD Display Area
1 Pixel
R
B
G
1,
1920
1200 1920
1200 Lines
12The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
HSD280MUW1- A Formal Specification
Page No. 13 / 26
Document No. Revision 1.0
4.3 Relationship Between Displayed Color and Input
MSB LSB MSB LSB MSB LSB Gray scale
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
LLLLLLLHLLLLLLLLLLLLLLLL L1
ХΝ Ν ΝL3Ξ Ц
HHHHHHLLLLLLLLLLLLLLLLLL L255
HHHHHHHLLLLLLLLLLLLLLLLL L255
LLLLLLLLLLLLLLLHLLLLLLLL L1
ХΝ Ν ΝL3Ξ Ц
ХΝ Ν ΝL3Ξ Ц
ХΝ Ν ΝL3Ξ Ц
L L L L L L L L H H H H H H L L L L L L L L L L L255
L L L L L L L L H H H H H H H L L L L L L L L L L255
LLLLLLLLLLLLLLLLLLLLLLLH L1
LLLLLLLLLLLLLLLLHH HHHHLL L255
LLLLLLLLLLLLLLLLHHHHHHHL L255
LLLLLLLHLLLLLLLHLLLLLLLH L1
H H H H H H L L H H H H H H L L H H H H H H L L L252
H H H H H H H L H H H H H H H L H H H H H H H L L254
Level
L251
L251
L251
L251
Basic color
Gray scale of Red
Gray scale of Green
Gray scale of Blue
Gray scale of White & Black
Display
Black LLLLLLLLLLLLLLLLLLLLLLLL -
Blue LLLLLLLLLLLLLLLLHHHHHHHH -
Green L L L L L L L L H H H H HHHHL L LL L L L L -
Light BlueL LL L L L L LHHHHHHHHHHHHHHHH -
Red HHHHHHHHLLLLLLLLLLLLLLLL ­Purple HHHHHHHHLLLLLLLLHHHHHHHH ­Yellow HHHHHHHHHHHHHHHHL LL L L L L L -
White HHHHHHHHHHHHHHHHHHHHHHHH ­Black LLLLLLLLLLLLLLLLLLLLLLLL L0
Dark LLLLLLHLLLLLLLLLLLLLLLLL L2
Light HHHHHHLHLLLLLLLLLLLLLLLL L255
Red HHHHHHHHLLLLLLLLLLLLLLLL Red L255
Black LLLLLLLLLLLLLLLLLLLLLLLL L0
Dark LLLLLLLLLLLLLLHLLLLLLLLL L2
Light L L L L L L L L H H H H H H L H L L L L L L L L L255
Green L L L L L L L L H H H H HHHHL L LL L L L LGreen L255
Black LLLLLLLLLLLLLLLLLLLLLLLL L0
Dark LLLLLLLLLLLLLLLLLLLLLLHL L2
Light LLLLLLLLLLLLLLLLHHHHHHLH L255
Blue LLLLLLLLLLLLLLLLHHHHHHHH Blue L255
Black LLLLLLLLLLLLLLLLLLLLLLLL L0
Dark LLLLLLHLLLLLLLHLLLLLLLHL L2
Light H H H H H H L H H H H H H H L H H H H H H H L H L253
White HHHHHHHHHHHHHHHHHHHHHHHHWhite L255
13The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 14 / 26
5.0 I/O CONNECTION PIN ASSIGNMENT
5.1 Interface Connector (30-pins ) (JAE: FI-X30SSL-HF or equivalent)
Pin No. Signal Description
1 RinO0- Receiver Signal (-) 2 RinO0+ Receiver Signal (+) 3 RinO1- Receiver Signal (-) 4 RinO1+ Receiver Signal (+) 5 RinO2- Receiver Signal (-) 6 RinO2+ Receiver Signal (+) 7 VSS Ground 8 RinOC- Clock Signal (-)
9 RinOC+ Clock Signal (+) 10 RinO3- Receiver Signal (-) 11 RinO3+ Receiver Signal (+) 12 RinE0- Receiver Signal (-) 13 RinE0+ Receiver Signal (+) 14 VSS Ground 15 RinE1- Receiver Signal (-) 16 RinE1+ Receiver Signal (+) 17 VSS Ground 18 RinE2- Receiver Signal (-) 19 RinE2+ Receiver Signal (+) 20 RinEC- Clock Signal (-) 21 RinEC+ Clock Signal (+) 22 RinE3- Receiver Signal (-) 23 RinE3+ Receiver Signal (+) 24 VSS Ground 25 NC SDA 26 NC SCL 27 NC NC 28 VDD+5V Power Supply, 5V (Typical) 29 VDD+5V Power Supply, 5V (Typical) 30 VDD+5V Power Supply, 5V (Typical)
14The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 15 / 26
5.2 Inverter Connector Pin Assignment
CN1 (INPUT SIGNAL): JST JST-PHR-12 or equivalent
Pin No. Symbol
1 Vin Input Voltage
2 Vin Input Voltage
3 Vin Input Voltage
4 Vin Input Voltage
5 Vin Input Voltage
6 GND Ground
7 GND Ground
8 GND Ground
9 GND Ground
10 GND Ground
11
12 Vbri Brightness control 5~0VÆlight~dark
Von/off
Description
Inverter on/off control
0V—>OFF, 5VÆON
NOTE: START FROM RIGHT SIDE
15The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 16 / 26
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module:
Item Symbol Min. Typ. Max. Unit Note
Voltage of power supply VDD 4.5 5.0 5.5 V
I
DD0
Current of power supply
I
1135 1235 1335 mA (1)
DD1
1995 2095 2195 mA (1)
I
DD
Vsync frequency fV 48 60 68 Hz (2)
Hsync frequency fH 58.89 74.04 83.74 KHz
Frequency f
Input rush current I
60.5 80 88 MHz
DCLK
--- --- 6 A (3)
RUSH
Note (1)
(a)White:
750 850 950
mA (1)
(b).V-Color :
Yellow
White
16The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Purple
Red
Cyan
Green
Blue
Black
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
V
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 17 / 26
(c)Mosaic : 2 Dot checker image
L31
L0
Grey scale:L0~L255
L0: Luminance with all pixels black.
L255: Luminance with all pixels white.
Note (2) When fv is too low, a flicker may be occurred on the display. Note (3) Input Rush Current condition
0.9VDD
GND
0.1VDD
5
500us~10ms
17The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
p
p
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 18 / 26
6.2 Inverter Electrical Characteristics
Item Symbol Min. Typ. Max. Unit Remarks
Voltage of Power Supply
Input Voltage
Brightness Control Input Voltage
Input Current of Power Supply
Lamp Lifetime -- 50000 -- Hrs Note (1)
Vin 21.6 24 26.4 V
ON/OFF 2.5 -- 5.0 V CFL (turn ON) B/L ON/OFF Control
ON/OFF 0.0 -- 2.5 V CFL (turn OFF)
0V: Min. brightness control
0 -- 5 V
V
BRT
Iin -- 3.4 4.0 A
5V: Max. brightness control
Vin= 24.0V, V condition
BRT
= 0.0V, stable
Note (1) Lamp life time (Hr) can be defined as the time in which it continues to operate under
the condition: Ta=25±3
o
C, typical lamp current until the brightness becomes less than
50%.
INVERTER
JST PHR-12
LCD MODULE
a. The asymmetry rate of the inverter waveform should be less than 10%.
Ѕ
b. The distortion tae of the waveform should be within
2±10%.
c. The inverter output waveform should be better similar to the ideal sine wave.
I
I-
Asymmetry rate = |I Distortion rate = I
18The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
p-I-p
| / I
p
(or I-p) / I
rms
x 100%
rms
www.panelook.com
Global LCD Panel Exchange Center
(2)
HannStar Display Corp.
www.panelook.com
Document Title
HSD280MUW1- A Formal Specification
Page No. 19 / 26
Document No. Revision 1.0
6.3 Interface Timing ( DE mode)
Item Symbol Min. Typ. Max. Unit
Frame Rate -- 48 60 68 Hz
Frame Period t1 1206 1235 1350 line
Vertical Display Time t2 1200 1200 1200 line
Vertical Blanking Time t3 6 35 150 line 1 Line Scanning Time t4 1040 1075 1200 clock
Horizontal Display Time t5 960 960 960 clock
Horizontal Blanking Time t6 80 115 240 clock
Clock Rate t7
60.5 80 88
MHz
Timing Diagram of Interface Signal (DE mode)
(1)Vertical
NCLK
DE
0~5
R
0~5
G
0~5
B
Horizontal
NCLK
DE
0~5
R
0~5
G
0~5
B
t2
t4
X,1 X,2 X,3 X,Y
t7
1234567891011
t1
X,1198 X,1200
X,1199
t4
t5 t6
1911
1913
1915
1917
12
1912
1914
1916
1918
1919 1920
t3
19The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
6.4 Power On / Off Sequence
HSD280MUW1- A Formal Specification
ΚΚΚΚ
Page No. 20 / 26
Power On
Power Off
Power Supply
0V
0V
0.1V
Signal
0.9V
DD
DD
TP1
TP2
0.6V 0.6V
TP3
0.9V
DD
0.1V
DD
TP4
0.1V
DD
TP5
TP6
Backlight
(Recommended)
50%
Item Min. Typ. Max. Unit Remark
TP1 0.5 -- 10 msec TP2 0 -- 50 msec TP3 0 -- 50 msec TP4 500 -- -- msec TP5 200 -- -- msec TP6 200 -- -- msec
NoteΚ(1) The supply voltage of the external system for the module input should be the same as the
definition of V
DD
.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on
before the LCD operation or the LCD truns off before the back-light turns off, the display
may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or keep a high
impedance.
50%
(4) TP4 should be measured after the module has been fully discharged between power off
and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
20The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 21 / 26
7.0 OUTLINE DIMENSION
7.1 Front View:
21The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 22 / 26
7.2 Back View:
BM Assembly Tolerance
| A-A’ | 1 (mm)
| B-B’ | 1 (mm)
22The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 23 / 26
8.0 LOT MARK
8.1 Lot Mark
ѾѿҀҁ҂҃҄҅҆
code 1,2,3,4,5,6: HannStar internal flow control code. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008
Mark 9 0 1 2 3 4 5 6 7 8
10 11 12 13 14 15
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
8.2 Location of Lot Mark
(1) The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice.
HSD280MUW1
-A**
Rev:
RoHS
Lot mark
23The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 24 / 26
9.0 PACKAGE SPECIFICATION
9.1 Packing form
(1) package quantity in one carton: 4 pieces.
²
(2) carton size: 746
(3) for domestic transportation only.
3 mmØ356²3 mmØ553
9.2 Packing assembly drawings
H
²
3 mm.
24The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 25 / 26
10.0 GENERAL PRECAUTION
10.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.
10.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.
10.3 Breakage of LCD Panel
10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin.
10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is broken.
10.4 Electric Shock
10.4.1 Disconnect power supply before handling LCD module.
10.4.2 Do not pull or fold the CCFL cable.
10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s connector or cables in order to prevent electric shock.
10.5 Absolute Maximum Ratings and Power Protection Circuit
10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.
10.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time.
10.5.3 It’s recommended employing protection circuit for power supply.
25The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
www.panelook.com
Document Title
Document No. Revision 1.0
HSD280MUW1- A Formal Specification
Page No. 26 / 26
10.6 Operation
10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
Use fingerstalls of soft gloves in order to keep clean display quality, when persons
handle the LCD module for incoming inspection or assembly.
10.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.
10.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color fading.
11.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzene or other adequate solvent.
10.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
10.8 Static Electricity
10.8.1 Protection film must remove very slowly from the surface of LCD module to prevent from electrostatic occurrence.
10.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge.
10.8.3 Persons who handle the module should be grounded through adequate methods.
10.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise, display characteristics may be changed.
10.10 Disposal
When disposing LCD module, obey the local environmental regulations.
26The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use