Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 1 / 27
Document No. DC130-005189 Revision 1.0
To :
Date :
www.panelook.com
Customer Acceptance Specification
Model : HSD250MUW3
- A++
Accepted by:
Signature Date
Proposed by: Technical Service Division
Signature Date
Note: 1. Please contact HannStar Display Corp. before designing your product based on this module specification.
2. The information contained herein is presented merely to indicate the characteristics and performance
of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems
that may result from application based on the module described herein.
3.The mark “ A** ” of Model means sub-model code
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 2 / 27
Document No. DC130-005189 Revision 1.0
Rev. Date Sub-Model Description of change
1.0 May.17.2011 A00 HSD 250MUW3-A Formal Specification was 1st issued
www.panelook.com
Record of Revisions
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 3 / 27
Document No. DC130-005189 Revision 1.0
1.0 General Descriptions ……………………………….… p.4
www.panelook.com
Contents
2.0 Absolute Maximum Ratings ………………………….. p.5
3.0 Optical Characteristics ……………………………….. p.6
4.0 Block Diagram ………………………………………… p.11
5.0 I/O Connection Pin Assignment …………………….. p.14
6.0 Electrical Characteristics ………………….……….. p.16
7.0 Outline Dimension …………………………….……… p.21
8.0 Lot Mark ……………………………………………….. p.23
9.0 Package Specification ……………………………...… p.24
10.0 General Precaution …………………………………… p.25
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 4 / 27
Document No. DC130-005189 Revision 1.0
1.0 GENERAL DESCRIPTIONS
1.1 Introduction
HannStar Display model HSD250MUW3-A is a color active matrix thin film transistor (TFT) liquid
crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is
composed of a FHD resolution (1920 vertical by 1080 horizontal pixel array) TFT LCD panel, the
voltage reference, common voltage, DC-DC converter, column, and row driver circuit..
1.2 Features
Ŷ 25”(24.55”) FHD TFT LCD Panel
Ŷ LED Backlight System
Ŷ Supported Full HD (V:1080 lines, H:1920 pixels) Resolution
Ŷ Supported to 75Hz Refresh Rate
Ŷ LCD Timing Controller
Ŷ RoHS Compliance
Ŷ VESA Compatible
Ŷ Halogen Free
www.panelook.com
1.3 Applications
Ŷ Desktop Monitors
Ŷ Display terminals for AV applications
Ŷ Monitors for industrial applications
1.4 General information
Item Specification
Outline dimension 568 x 330 x 9.8(Typ) mm
Display area 543.46 (H) x305.69 (V) (25.0” diagonal) mm
Screen Diagonal 24.55 inch
Number of Pixel 1920(H) x 1080(V) Pixels
Pixel pitch 0.283(H) x 0.283(V) mm
Pixel arrangement RGB Vertical Stripe
Color Gamut
Display color 16.7M (6-bits+Hi FRC)
Display mode Normally white
Surface treatment Antiglare, Hard-Coating (3H)
Weight 1750 g
Back-light White LED
Input signal 2-ch LVDS
Power consumption
68%
System 4.0(Typ.)
B/L 16.13(Typ.)
Unit
NTSC
W
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 5 / 27
Document No. DC130-005189 Revision 1.0
Remark(1): There are two functions, brightness and contrast tuning, to let luminance to 125cd/m2 in OSD. OSD shouldn't restrict the panel's G-T curve for
brightness to be 125cd/m2. The higher contrast, the higher angular uniformity. That is to say, if OSD want to tune the panel's luminance to 125 cd/m2, the
suitable way is to only tune the brightness function. And if tuning the brightness function to 125 cd/m2, it would be better only to tuning the inverter, not the
gray level.
1.5 Mechanical Information
Item Min. Typ. Max. Unit
www.panelook.com
Horizontal(H) 567.5 568.0 568.5 mm
Module Size
Vertical(V) 329.5 330.0 330.5 mm
Depth(D) -- 9.8 -- mm
Weight (without inverter) -- 1750 -- g
Torque of customer screw hole -- -- 3.0 Kgf*Cm
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item Symbol Min. Max. Unit Note
Storage temperature T
Operating temperature T
Vibration (non-operating) V
Shock (non-operating) S
Storage humidity H
Operating humidity HOP 10 90 %RH (4)
Low pressure (operating) P
Low pressure (non-operating) P
Note (1)Storage /Operating temperature
STG
OPR
NOP
NOP
STG
LOP
LNOP
Humidity (%)
-20 60 oC
0 50 oC (1)
-- 1.5 G (2)
-- 70 G (3)
10 90 %RH (3)
697 -- HPa (5)
116 -- HPa (6)
100
90
80
60
Storage Range
-20-40
40
20
10
0
0
Temperature (
20 40 60
o
C)
50
65
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 6 / 27
Document No. DC130-005189 Revision 1.0
(2) 5-500-5Hz sine wave, X, Y, Z each directions, 30 min/cycle.
(3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test,
It is necessary to fill the silicon rubber between the shock jig as buffer.
(4) Max wet bulb temp. =39
(5) 2 hrs. (10000 feet)
(6) 24hrs. (50000 feet)
2.2 Electrical Absolute Rating:
2.2.1 TFT LCD Module:
Item Symbol Min. Max. Unit. Note
Power supply Voltage VDD -0.3 6.0 V(DC) (1)(2)
2.2.2 Back Light Unit:
www.panelook.com
o
C
Item Symbol Min. Max. Unit Note
LED current IF -- 20.6 mA (1)(2)(3)
LED Voltage VF 2.95 3.4 Volt (1)(2)(3)
Note: (1) Permanent damage may occur to the LCD module if beyond this specification.
Functional operation should be restricted to the conditions described under Normal
Operating Conditions.
(2) To exceed 20.6mA, life time accelerate drop down.
(3) Within Ta=25±2°C
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 7 / 27
Document No. DC130-005189 Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR 640 800 -- (1)(2)
Rising
Response time
Falling
www.panelook.com
TR +TF -- 4 8 msec (1)(3)
White luminance
Y
(center of screen)
L
Rx
Red
Ry
Gx
Gy
Bx
Color
chromaticity
(CIE1931)
Gree
n
Blue
By
Wx
White
Wy
Hor.
Viewing angle
Ver.
Brightness uniformity B
L
R
H
L
UNI
3.2 Measuring Condition
Ŷ Measuring surrounding: dark room
Ŷ Each LED current is 20 mA
Ŷ V
=5.0V, fV=60Hz, f
DD1
DCLK
Ŷ Surrounding temperature: 25±2
Ŷ 20min. Warm-up time.
=0
φ=0
Normal
viewing
angle
CR>10
=0
φ=0
=66.28MHz
o
C
o
200 250 -- cd/m
o
0.637
2
(1)(4)
0.350
0.343
-0.03
0.615
+0.03
(1)(4)
0.143
0.061
0.313
0.329
75 85 --
75
85
--
65
75
o
o
70 -- -- % (6)
75
85
--
--
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 8 / 27
Document No. DC130-005189 Revision 1.0
3.3 Measuring Equipment
Ŷ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and
BM-5A for other optical characteristics.
Ŷ Measuring spot size: 20~21mm
Note (1) Definition of Viewing Angle:
www.panelook.com
ӥ
H
12’ o’clock
ӥ
=90
H
o
Ә
ӘL=90
L
o
ӥ
L
Ә
R
6’ o’clock
ӥL=90
Note (2) Definition of Contrast Ratio(CR) :
measured at the center point of panel
Luminance with all pixels white (L255)
CR =
Luminance with all pixels black (L0)
o
ӘR=90
o
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 9 / 27
Document No. DC130-005189 Revision 1.0
www.panelook.com
Optical
response
Note (4) Optical characteristic measurement setup
Note (3) Definition of Response Time: Sum of TR and T
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
R
100%
90%
10%
0%
LCD Panel
Field = 1
o
F
T
F
time
Photo-detector (BM-5A)
120cm
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 10 / 27
Document No. DC130-005189 Revision 1.0
Note (5) Definition of Center Luminance of White (center)
Center Luminance= Y1
www.panelook.com
1/10 H
1/10H
1/2H
1/10V
Y1
1/2V
1/10V
Note (6) Definition of brightness uniformity
(Min Luminance of 9 points)
Luminance uniformity = x 100%
(Max Luminance of 9 points)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 11 / 27
Document No. DC130-005189 Revision 1.0
4.0 BLOCK DIAGRAM
4.1 LCD Module Block Diagram:
TCON with
LVDS receiver
www.panelook.com
X-driver IC
Liquid Crystal Panel
Connector CN1
DC/DC
Converter
19201080 pixels
Y-d ri v er IC
Gamma
Reference
Voltage
Generator
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 12 / 27
Document No. DC130-005189 Revision 1.0
4.2 Back Light Unit
FFC Connector
www.panelook.com
˟˼˺˻ʳ˕˴
˕˴˶˾ʳ˩˼˸
4.3 Pixel Format
1,1
1,2
(odd)
(even)
2,1
(odd)
1080
,1
FFC Connector
1,3
1,4
(odd)
(even)
˟˼˺˻ʳ˕˴
LCD Display Area
1
Pixel
R
R
B
G
1,
1920
R
1080
1920
1080 Lines
1920 Pixels
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 13 / 27
Document No. DC130-005189 Revision 1.0
4.4 Relationship Between Displayed Color and Input
MSB LSB MSB LSB MSB LSB Gray scale
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
LLLLLLLHLLLLLLLLLLLLLLLL L1
ʅǽ ǽ ǽ L3ǾL251
ʆ
ʅǽ ǽ ǽ L3ǾL251
ʆ
ʅǽ ǽ ǽ L3ǾL251
ʆ
ʅǽ ǽ ǽ L3ǾL251
ʆ
H H H H H H L L L L L L L L L L L L L L L L L L L252
H H H H H H H L L L L L L L L L L L L L L L L L L254
LLLLLLLLLLLLLLLHLLLLLLLL L1
LLLLLLLLHH HHHHLLLLLLLLLL L252
LLLLLLLLHHHHHHHLLLLLLLLL L254
LLLLLLLLLLLLLLLLLLLLLLLH L1
LLLLLLLLLLLLLLLLHH HHHHLL L252
LLLLLLLLLLLLLLLLHHHHHHHL L254
LLLLLLLHLLLLLLLHLLLLLLLH L1
H H H H H H L L H H H H H H L L H H H H H H L L L252
H H H H H H H L H H H H H H H L H H H H H H H L L254
Basic
color
Gray scale
of Red
Gray scale
of Green
Gray scale
of Blue
Gray scale
of White &
Black
Display
Black LLLLLLLLLLLLLLLLLLLLLLLL -
Blue LLLLLLLLLLLLLLLLHHHHHHHH -
Green L L L L LLLLHHHHHHHHLLLLLLLL -
Light BlueLLLLLLLLHHHHHHHHHHHHHHHH -
Red HHHHHHHH L L L L L L L L L L L L L L L L Purple HHHHHHHHL L L L L L L L HHHHHHHH Yellow HHHHHHHHHHHHHHHH L L L L L L L L -
White HHHHHHHHHHHHHHHHHHHHHHHH Black LLLLLLLLLLLLLLLLLLLLLLLL L0
Dark LLLLLLHLLLLLLLLLLLLLLLLL L2
Light H H H H H H L H L L L L L L L L L L L L L L L L L253
Red HHHHHHHH L L L L L L L L L L L L L L L L Red L255
Black LLLLLLLLLLLLLLLLLLLLLLLL L0
Dark LLLLLLLLLLLLLLHLLLLLLLLL L2
Light LLLLLLLLHHHHHHLHLLLLLLLL L253
Green L L L L LLLLHHHHHHHHLLLLLLLLGreen L255
Black LLLLLLLLLLLLLLLLLLLLLLLL L0
Dark LLLLLLLLLLLLLLLLLLLLLLHL L2
Light LLLLLLLLLLLLLLLLHHHHHHLH L253
Blue LLLLLLLLLLLLLLLLHHHHHHHH Blue L255
Black LLLLLLLLLLLLLLLLLLLLLLLL L0
Dark LLLLLLHLLLLLLLHLLLLLLLHL L2
Light H H H H H H L H H H H H H H L H H H H H H H L H L253
White HHHHHHHHHHHHHHHHHHHHHHHHWhite L255
www.panelook.com
Level
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 14 / 27
Document No. DC130-005189 Revision 1.0
5.0 I/F CONNECTION PIN ASSIGNMENT
5.1 Interface Connector (30-pins, STM MSCK240730B or equivalent)
Pin No. Signal Description
1 RinO0- Receiver Signal (-)
2 RinO0+ Receiver Signal (+)
3 RinO1- Receiver Signal (-)
4 RinO1+ Receiver Signal (+)
5 RinO2- Receiver Signal (-)
6 RinO2+ Receiver Signal (+)
7 VSS Ground
8 RinOC- Clock Signal (-)
9 RinOC+ Clock Signal (+)
10 RinO3- Receiver Signal (-)
11 RinO3+ Receiver Signal (+)
12 RinE0- Receiver Signal (-)
13 RinE0+ Receiver Signal (+)
14 VSS Ground
15 RinE1- Receiver Signal (-)
16 RinE1+ Receiver Signal (+)
17 VSS Ground
18 RinE2- Receiver Signal (-)
19 RinE2+ Receiver Signal (+)
20 RinEC- Clock Signal (-)
21 RinEC+ Clock Signal (+)
22 RinE3- Receiver Signal (-)
23 RinE3+ Receiver Signal (+)
24 VSS Ground
25 NC SDA
26 NC SCL
27 NC NC
28 VDD+5V Power Supply, 5V (Typical)
29 VDD+5V Power Supply, 5V (Typical)
30 VDD+5V Power Supply, 5V (Typical)
www.panelook.com
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 15 / 27
Document No. DC130-005189 Revision 1.0
5.2 LED Board Pin Assignment:
CN: LED Power Source Connector (ACES 91500-01001-H01 or equivalent)
Pin No Symbol Description
1
2
3
4
5
6
7
8
9
10
www.panelook.com
RT1-1
RT1-1
RT1-2
VIN-1
VIN-1
VIN-1
VIN-1
RT1-2
RT1-3
RT1-3
Upper LED Bar Return Signal
Upper LED Bar Return Signal
Upper LED Bar Return Signal
Upper LED Power
Upper LED Power
Upper LED Power
Upper LED Power
Upper LED Bar Return Signal
Upper LED Bar Return Signal
Upper LED Bar Return Signal
Pin No
1
2
3
4
5
6
7
8
9
10
Symbol Description
RT2-1
RT2-1
RT2-2
VIN-2
VIN-2
VIN-2
VIN-2
RT2-2
RT2-3
RT2-3
Lower LED Bar Return Signal
Lower LED Bar Return Signal
Lower LED Bar Return Signal
Lower LED Power
Lower LED Power
Lower LED Power
Lower LED Power
Lower LED Bar Return Signal
Lower LED Bar Return Signal
Lower LED Bar Return Signal
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
D
D
V
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 16 / 27
Document No. DC130-005189 Revision 1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module:
Item Symbol Min. Typ. Max. Unit Note
Voltage of power supply VDD 4.5 5.0 5.5 V
Current of power supply I
Vsync frequency fV 48 60 75 Hz (2)
Hsync frequency fH 52.61 65.76 82.2 KHz
Frequency f
Input rush current I
www.panelook.com
800 1000 1200 mA (1)
DD0
53.02 66.28 85 MHz
DCLK
--- --- 4.5 A (3)
RUSH
Note (1) VDD =5.0V, Black pattern (L0)
Note (2) When fv is too low, a flicker may be occurred on the display.
Note (3) Input Rush Current condition
5
0.9VD
GN
0.1VDD
500us~10ms
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 17 / 27
Document No. DC130-005189 Revision 1.0
6.2 Back-Light Unit
Parameter Symbol Min Typ Max Units Condition
www.panelook.com
Light Bar Input Current I
Light Bar Input Voltage V
F
F
---
---
360
44.8
---
---
mA
Volt
Ta= 25 к
Ta= 25 к
Ta= 25 к
Power consumption P
--- 16.13
LED
---
Watt
Note (1)
Ta= 25 к
LED Life-Time N/A -- 30,000 -- Hour
I
360mA
F=
Note (2)
Note (1): Calculator value for reference P=IF x VF
Note (2): The LED lifetime defines as the estimated time to 50% degradation of Original
luminous.
Note (3): For better LED light bar driving quality. It is recommended to utilize the adaptive
boost converter with current balancing function to drive LED light-bar.
Note (4): Two Light bar Input current 360mA, One Light bar Input current 180mA.
Note (5): LED light bar configuration is shown as below. (Light bar 1 same as Light bar 2)
Light Bar 1 configuration drawing
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 18 / 27
Document No. DC130-005189 Revision 1.0
6.3 Switching Characteristics for LVDS Receiver
Item Symbol Min. Typ. Max. Unit Conditions
Differential Input High Threshold Vth
Differential Input Low Threshold Vtl -100
Input Current I
Differential input Voltage |VID| 0.1
Common Mode Voltage Offset V
Clock Frequency fc 50 54 67.5 MHz
www.panelook.com
ЁЁ
IN
CM
-10
1.15
+100 mV
ЁЁ
Ё
Ё
Ё
+10 uA
0.6 V
1.35 V
mV
V
CMLVDS
=2.4V/0V,
V
IN
V
DD
=1.25V
=3.6V
Differential Signal Diagram
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 19 / 27
Document No. DC130-005189 Revision 1.0
6.4 Interface Timing ( DE mode)
Item Symbol Min. Typ. Max. Unit
Frame Rate --
Frame Period t1
Vertical Display Time t2
Vertical Blanking Time t3
1 Line Scanning Time t4
Horizontal Display Time t5
Horizontal Blanking Time t6
Clock Rate t7
www.panelook.com
48 60 75
1088 1096 1104
1080 1080 1080
8 16 24
992 1008 1276
960 960 960
32 48 316
53.02 66.28 85
Hz
line
line
line
clock
clock
clock
MHz
Timing Diagram of Interface Signal (DE mode)
(1)Vertical
NCLK
DE
R
0~5
R
0~7
G
0~5
G
0~7
B
0~5
B
~
(2)Horizontal
t2
t4
X,1 X,2 X,3 X,Y
t7
t1
X,1198 X,1200
X 1078
X,1199
X 1079
t4
X 1080
t3
NCLK
t5 t6
DE
R
0~5
R
0~7
G
0~5
G
0~7
B
0~5
B
~
1234567891011
1911
1913
1915
1917
12
1912
1914
1916
1918
1919
1920
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 20 / 27
Document No. DC130-005189 Revision 1.0
6.5 Power On / Off SequenceǺǺǺǺ
www.panelook.com
Power On
Power Off
Power Supply
0V
0.1V
0.9V
DD
DD
TP1
TP3
TP2
TP7
0.9V
DD
0.1V
DD
TP4
0.1V
DD
Signal
0.6V 0.6V
0V
TP5
TP6
Backlight
(Recommended)
50%
50%
Item Min. Typ. Max. Unit Remark
TP1 0.5 -- 10 msec
TP2 0.01 -- 50 msec
TP3 20 35 50 msec
TP4 1000 -- -- msec
TP5 200 -- -- msec
TP6 200 -- -- msec
TP7 1 -- 10 msec
NoteǺ(1) The supply voltage of the external system for the module input should be the same as the
definition of V
DD
.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on
before the LCD operation or the LCD truns off before the back-light turns off, the display
may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or keep a high
impedance.
(4) TP4 should be measured after the module has been fully discharged between power off
and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 21 / 27
Document No. DC130-005189 Revision 1.0
www.panelook.com
6.6 V
Power Dip ConditionΚΚΚΚ
LCD
NoteΚ(1) Dip condition
3.5V ≤ V
(2) V
V
< 3.5V
LCD
- dip conditions should also follow the power On/Off conditions for supply
LCD
voltage.
t
d
≤ 4.5V, td≤ 20ms
LCD
3.5V
4.5V
V
LCD
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 22 / 27
Document No. DC130-005189 Revision 1.0
7.0 OUTLINE DIMENSION
7.1 250MUW3-A00 Front View:
www.panelook.com
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 23 / 27
Document No. DC130-005189 Revision 1.0
7.2 250MUW3-A00 Back View:
www.panelook.com
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 24 / 27
Document No. DC130-005189 Revision 1.0
8.0 LOT MARK
8.1 Lot Mark
www.panelook.com
˞˟ˠˡˢˣˤ˥˦
10 11 12 13 14 15
code 1,2,3,4,5,6: HannStar internal flow control code.
code 7: production location.
code 8: production year.
code 9: production month.
code 10,11,12,13,14,15: serial number.
Note (1) Production Year: Code 8 is defined by the last number of the year. For example:
Year 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012
Mark 3 4 5 6 7 8 9 0 1 2
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
8.2 Location of Lot Mark
(1) The label is attached to the backside of the LCD module.
(2) This is subject to change without prior notice.
HSD250MUW3
-A*
Rev:
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
GP-HF
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 25 / 27
Document No. DC130-005189 Revision 1.0
9.0 PACKAGE SPECIFICATION
9.1 Packing form
(1) package quantity in one carton: 10 Pcs.
(2) carton size: 690mm x 304mm x 461mm.
(3) for domestic transportation only.
9.2 Packing assembly drawings
www.panelook.com
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 26 / 27
Document No. DC130-005189 Revision 1.0
10.0 GENERAL PRECAUTION
10.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation
control systems, military systems and any other application where performance failure
could be life-threatening or otherwise catastrophic.
10.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD
module, and may cause scratches or dust on the display. HannStar does not warrant the
module, if customers disassemble or modify the module.
10.3 Breakage of LCD Panel
10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid
crystal, and do not contact liquid crystal with skin.
10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is
broken.
10.4 Electric Shock
10.4.1 Disconnect power supply before handling LCD module.
10.4.2 Do not pull or fold the CCFL cable.
10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s connector
or cables in order to prevent electric shock.
10.5 Absolute Maximum Ratings and Power Protection Circuit
10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental
temperature, etc., otherwise LCD module may be damaged.
10.5.2 Please do not leave LCD module in the environment of high humidity and high
temperature for a long time.
10.5.3 It’s recommended employing protection circuit for power supply.
10.6 Operation
10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
Use fingerstalls of soft gloves in order to keep clean display quality, when persons
handle the LCD module for incoming inspection or assembly.
10.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other soft
material.
10.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color
fading.
11.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a little
petroleum benzene or other adequate solvent.
www.panelook.com
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD250MUW3 Standard Specification Page No. 27 / 27
Document No. DC130-005189 Revision 1.0
10.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
10.8 Static Electricity
10.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent
from electrostatic occurrence.
10.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is
very weak to electrostatic discharge. Please be careful with electrostatic
discharge.
10.8.3 Persons who handle the module should be grounded through adequate methods.
10.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
10.10 Disposal
When disposing LCD module, obey the local environmental regulations.
www.panelook.com
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...