How it Works
HannStar
Loading...
HSD220MKW1-A00
Specification
28 pgs433.54 Kb0
Specification
26 pgs891.5 Kb0

HannStar HSD220MKW1-A00 Specification

Download
Page 1
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
TO ：Road Well
Date：2009/04/16
Customer Acceptance Specification
Model : HSD220MKW1-
Revision 1.0
A00
相關文件:
Accepted by:
Proposed by: Technical Service Division
Signature Date
Note:1. Please contact HannStar Display Corp. before designing your product based on
this module specification.
2.The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that may result from application based on the module described herein.
Signature Date
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 2
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
Rev.
1.0
Apr.,16, 2009
Date Sub-Model
A00
Revision 1.0
Record of Revisions
Description of change
Preliminary Product Specification was first issued.
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 3
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
Revision 1.0
Contents
2.0 Absolute Maximum Ratings ………………………….. p.5
3.0 Optical Characteristics ……………………………….. p.7
4.0 Block Diagram ………………………………………………. p.11
5.0 I/O Connection Pin Assignment …………………………… p.14
1.0 General Descriptions ………………………………………..p.4
6.0 Electrical Characteristics ………………….……………… p.15
7.0 Outline Dimension …………………………….……………. p.21
8.0 Lot Mark ……………………………………………………… p.23
9.0 Package Specification ……………………………...………. p.24
10.0 General Precaution …………………………………………. p.25
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 4
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
1.0 GENERAL DESCRIPTIONS
1.1 Introduction
HannStar Display model HSD220MKW1-A is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, the voltage reference, common voltage, DC-DC converter, column, and row driver circuit. This TFT LCD has a 22-inch diagonally measured active display area with WSXGA+ resolution (1050 vertical by 1680 horizontal pixel array).
1.2 Features
2” WSXGA+ TN mode TFT LCD panel
■ 2
■ High speed response time
■ 4 CCFL Backlight system
■ Supported WSXGA+ (V: 1050 lines, H: 1680 pixels) resolution
■ Supported 75Hz refresh rate
■ With LCD Timing Controller
■ RoHS compatible
1.3 General information
Item Specification Unit Outline dimension 493.7×320.1×16.5 (typ.) mm Display area 473.76 (H) x296.16 (V) mm Number of Pixel 1680(H) x 1050(V) Pixels Pixel pitch 0.282(H) x 0.282(V) mm Pixel arrangement RGB Vertical stripe Display color 16.7M (6-bit+HiFRC) Display mode Normally white Surface treatment Antiglare (3H)
Revision 1.0
Weight 3050 G Back-light 4-CCFLs, Top & bottom edge side
Input signal 2-ch LVDS
Logic system 4.2 @ v-color pattern
Power consumption
B/L system 5.48
1.4 Applications
■ Desktop and Multi-function monitors
■ Display terminals for AV applications
■ Monitors for industrial applications
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
W W
Page 5
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
1.5 Mechanical Information
Revision 1.0
Item Min. Typ. Max. Unit
Horizontal(H) 493.2 493.7 494.2 mm
Module Size
Vertical(V) 319.6 320.1 320.6 mm
Depth(D) 16.0 16.5 17.0 mm
Weight (without inverter) 2850 3050 3250 g
Torque of customer screw hole 3.0 Kgf*Cm
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 6
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
40 60
o
Document Title
Document No.
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item Symbol Storage temperature T Operating temperature T Vibration (non-operating) V Shock (non-operating) S Storage humidity H Operating humidity HOP 10 80 %RH (4) Low pressure (operating) P Low pressure (non-operating) P
Note (1) Storage /Operating temperature
(2) 10-500Hz sine wave, X, Y, Z each directions, 30min/cycle. (3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test, It is necessary to fill the silicon rubber between the shock jigs as buffer. (4) Max wet bulb temp. =39 (5) 2 hrs. (10000 feet) (6) 24hrs. (50000 feet)
2.2 Electrical Absolute Rating:
2.2.1 TFT LCD Module:
Storage Range
-40
Revision 1.0
Min. Max. Unit Note
o
C
o
C (1)
65
-20
o
C
STG OPR NOP NOP STG
LOP
LNOP
Humidity (%)
100
90 80 60
40 20
10
0
0
Temperature (
-20 60 0 50
-- 1.5 G (2)
-- 70 G (3) 10 90 %RH (3)
697 -- HPa (5)
116 -- HPa (6)
Operating Range
20
C)
50
Item Symbol
Power supply Voltage VDD
Min. Max. Unit. Note
-0.3 6.0 V(DC) (1)(2)
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 7
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
Revision 1.0
2.2.2 Back Light Unit:
Item Symbol Min. Max. Unit Note
Lamp current IL 3.0 9.0 mA (1)(2)(3)
Lamp frequency fL 40 80 KHz (1)(2)(3)
Note: (1) Permanent damage may occur to the LCD module if beyond this specification.
Functional operation should be restricted to the conditions described under Normal Operating Conditions.
(2) To exceed 7.5mA, life time accelerate drop down and if to exceed 9.0 mA has safety
problem. If current lower than 3.5 mA, CCFL would be unstable or damaged.
(3) Within Ta=25±2°C
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 8
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max.
Contrast CR 700 1000 -- (1)(2) Response time
White luminance (center of screen)
Color chromaticity (CIE1931)
Rising
Falling
Red
Gree
n
Blue
Revision 1.0
Unit Note
TR -- 1.5 3
msec (1)(3)
TF -- 3.5 7
YL 240 300 cd/m
Θ
=0o
Rx
Ry Gx Gy
Bx
By
φ=0o
Normal
viewing
angle
0.615 0.645 0.675
0.310 0.340 0.370
0.270 0.300 0.330
0.600 0.630 0.660
0.110 0.140 0.170
0.035 0.065 0.095
(1)(4)(7)
2
(IL=7.5m A)
(1)(5)
Wx
0.280 0.310 0.340
White
Hor.
Viewing angle
Ver.
Hor.
Viewing angle
Ver.
Brightness uniformity B
Wy
Θ
80 85 --
L
Θ
80 85 --
Θ Θ Θ Θ Θ Θ
R H L L R H L
UNI
CR>10
75 80 --
80 85 -­ 80 85 --
CR>5
80 85 --
Θ
=0o
φ=0o
0.300 0.330 0.360
75 80 --
80 85 -­75 -- -- % (6)
3.2 Measuring Condition
■ Measuring surrounding: dark room
■ Lamp current IBL: (7.5)±0.1mA, lamp freq. FL= 50KHz, Inverter: TDK TBD332LR
■ V
■ Surrounding temperature: 25±2oC
■ 30min. Warm-up time.
=5.0V, fV=60Hz, f
DD1
=59.61MHz
DCLK
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 9
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
o
Document Title Document No.
3.3 Measuring Equipment
■ F
PM520 of Westar Display technologics, INC., which utilized SR-3 for Chromaticity and
BM-5A for other optical characteristics.
Revision 1.0
■ Measuring spot size: 20~21mm
Note (1) Definition of Viewing Angle:
Φ
H
12’ o’clock
Φ
=90
H
Θ
L
Θ
R
Θ
=90
L
Φ
L
Note (2) Definition of Contrast Ratio (CR): measured at the center point of panel
Luminance with all pixels white (L255) CR = Luminance with all pixels black (L0)
6’ o’clock
=90
L
o
Φ
o
Θ
=90o
R
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 10
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
HSD220MKW1 Specification for Roadwell Page No. 10/ 28
Revision 1.0
Note (3) Definition of Response Time: Sum of T
white(TFT OFF) black (TFT ON) white(TFT OFF)
100%
90%
T
R
Optical response
10%
0%
Note (4) Optical characteristic measurement setup
LCD Panel
Field = 1
120cm
and TF
R
o
T
F
Photo-detector (BM-5A)
time
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 11
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
Note (5) Definition of Center Luminance of White Center Luminance= Y1
1/10V
1/10V
ote (6) Definition of brightness uniformity
N
Luminance uniformity = x 100%
1/10 H
HSD220MKW1 Specification for Roadwell Page No. 11/ 28
Revision 1.0
1/10H
1/2H
Y1
(Min Luminance of 9 points)
(Max Luminance of 9 points)
1/2V
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 12
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Back light lamp
Document Title Document No.
4.0 BLOCK DIAGRAM
4.1 LCD Module Block Diagram:
Connector CN1
DC/DC
Converter
4.2 Back Light Unit
HSD220MKW1 Specification for Roadwell Page No. 12/ 28
Revision 1.0
X-driver IC
TCON with
LVDS receiver
Liquid Crystal Panel
1680×1050 pixels
Y-driver IC
Gamma
Reference
Voltage
Generator
1 Hot 1 2 Cold 1
1 Hot 2 2 Cold 2
CN2, 3, 4, 5.
1 Hot 1 2 Cold 1
1 Hot 2 2 Cold 2
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 13
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
1050
680
LCD Display Area
B
(even)
(odd)
Document Title Document No.
4.3 Pixel Format
1,1
(odd)
2,1
(odd)
1050
,1
1,2
HSD220MKW1 Specification for Roadwell Page No. 13/ 28
Revision 1.0
1,3
1,4
(even)
1 Pixel
R
G
R
R
1680
1
1,
1050 Lines
1680 Pixels
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 14
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
H H H H H L L L L L L L L L L
L L L L L L L H H H H H H H H L L L L L L L L
H H H H H L L
Document Title Document No.
HSD220MKW1 Specification for Roadwell Page No. 14/ 28
Revision 1.0
4.4 Relationship Between Displayed Color and Input
MSB LSB MSB LSB MSB LSB Gray scale Display
Basic color
Gray scale of Red
Gray scale of Green
Gray scale of Blue
Gray scale of White & Black
Black L L L L L L L L L L L L L L L L L L L L L L L L
Blue L L L L L L L L L L L L L L L L H H H H H H H H
Green L L L L L L L L H H H H H H H H L L L L L L L L
Light Blue L L L L L L L L H H H H H H H H H H H H H H H H
Red H H H H H H H H L L L L L L L L L L L L L L L L Purple H H H H H H H H L L L L L L L L H H H H H H H H Yellow H H H H H H H H H H H H H H H H L L L L L L L L
White H H H H H H H H H H H H H H H H H H H H H H H H Black L L L L L L L L L L L L L L L L L L L L L L L L
Dark L L L L L L H L L L L L L L L L L L L L L L L L
Light H H H H H H L H L L L L L L L L L L L L L L L L
Red H H H H H H H H L L L L L L L L L L L L L L L L Red L255
Black L L L L L L L L L L L L L L L L L L L L L L L L
Dark L L L L L L L L L L L L L L H L L L L L L L L L
Light L L L L L L L L H H H H H H L H L L L L L L L L
Green L
Black L L L L L L L L L L L L L L L L L L L L L L L L
Dark L L L L L L L L L L L L L L L L L L L L L L H L
Light L L L L L L L L L L L L L L L L H H H H H H L H L255
Blue L L L L L L L L L L L L L L L L H H H H H H H H Blue L255
Black L L L L L L L L L L L L L L L L L L L L L L L L
Dark L L L L L L H L L L L L L L H L L L L L L L H L
Light H H H H H H L H H H H H H H L H H H H H H H L H L253
White H H H H H H H H H H H H H H H H H H H H H H H H White L255
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
L L L L L L L H L L L L L L L L L L L L L L L L
↑ ↓
H H H H H H L L L L L L L L L L L L L L L L L L
H H H H H H H L L L L L L L L L L L L L L L L L
L L L L L L L L L L L L L L L H L L L L L L L L
↑ ↓
L L L L L L L L H
L L L L L L L L H H H H H H H L L L L L L L L L
L L L L L L L L L L L L L L L L L L L L L L L H
↑ ↓
L L L L L L L L L L L L L L L L H
L L L L L L L L L L L L L L L L H H H H H H H L
L L L L L L L H L L L L L L L H L L L L L L L H
↑ ↓
H H H H H H L L H H H H H H L L H H H H H H L L
H H H H H H H L H H H H H H H L H H H H H H H L
︰
︰
︰
︰
︰
︰
︰
︰
︰
L3…L251
︰
L3…L251
︰
L3…L251
︰
L3…L251
Level
-
-
-
-
-
-
-
­L0 L1 L2
L255 L255 L255
L0 L1 L2
L255 L255 L255
Green L255
L0 L1 L2
L255
L255
L0 L1 L2
L252
L254
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 15
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
HSD220MKW1 Specification for Roadwell Page No. 15/ 28
5.0 I/O CONNECTION PIN ASSIGNMENT
5.1 Interface Connector (30-pins ) (HRS: MDF76GW-30S-1H or equivalent)
Pin No. Signal Description
1 RinO0- Receiver Signal (-) 2 RinO0+ Receiver Signal (+) 3 RinO1- Receiver Signal (-) 4 RinO1+ Receiver Signal (+) 5 RinO2- Receiver Signal (-) 6 RinO2+ Receiver Signal (+) 7 VSS Ground 8 RinOC- Clock Signal (-) 9 RinOC+ Clock Signal (+)
Revision 1.0
10 RinO3- Receiver Signal (-)
11 RinO3+ Receiver Signal (+) 12 RinE0- Receiver Signal (-) 13 RinE0+ Receiver Signal (+) 14 VSS Receiver Signal (+) 15 RinE1- Receiver Signal (-) 16 RinE1+ Receiver Signal (+) 17 VSS Ground 18 RinE2- Receiver Signal (-) 19 RinE2+ Receiver Signal (+) 20 RinEC- Clock Signal (-) 21 RinEC+ Clock Signal (+) 22 RinE3- Receiver Signal (-) 23 RinE3+ Receiver Signal (+) 24 VSS Ground 25 NC NC 26 NC GND 27 NC GND 28 VDD+5V Power Supply, 5V (Typical) 29 VDD+5V Power Supply, 5V (Typical) 30 VDD+5V Power Supply, 5V (Typical)
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 16
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
5.2 Back Light Unit (CCFL) Connectors:
CN2, 3, 4, 5: CCFL Power Source (Yeonho 35001H5-02 or equivalent)
HSD220MKW1 Specification for Roadwell Page No. 16/ 28
Revision 1.0
Pin No. Symbol Color Function
1 Hot1 Pink CCFL power supply (High voltage) 2 Cold1 White Ground
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 17
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
HSD220MKW1 Specification for Roadwell Page No. 17/ 28
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module:
Item Symbol
Voltage of power supply VDD 4.5 5.0 5.5 V
Current of power supply
Vsync frequency fV 56 60 75 Hz (2) Hsync frequency fH 60.5 64.8 82.4 KHz Frequency f Input rush current I
Note (1)
Revision 1.0
Min. Typ. Max. Unit Note
I
595 695 795 (1)
DD0
I
720 870 1020 mA (1)
DD1
I
960 1160 1360 mA (1)
DD2
55.64 59.61 82 MHz
DCLK
--- --- 2 A (3)
RUSH
(a) White: I
DD0
(b) V- Color: I
DD1
White
Yellow
Purple
Cyan
Red
Green
Black
Blue
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 18
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
L31
0.1VDD
V
Document Title Document No.
(c) Mosaic: I
HSD220MKW1 Specification for Roadwell Page No. 18/ 28
Revision 1.0
DD2
L0 Grey scale: L0~L255
L0: Luminance with all pixels black.
L255: Luminance with all pixels white.
Note (2) When fv is too low, a flicker may be occurred on the display. Note (3) Input Rush Current condition
0.9VDD
GND
5
700us~10ms
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 19
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
A
A
A
A
Document Title Document No.
HSD220MKW1 Specification for Roadwell Page No. 19/ 28
Revision 1.0
6.2 Back-Light Unit
The back- light system is an direct-lighting type with 4CCFLs
(Cold Cathode Fluorescent Lamp).
The characteristics of the lamp are shown in the following tables.
Item Symbol
Min. Typ. Max. Unit Note Lamp current IL 3.0 7.5 9.0 mA(rms) Lamp voltage VL - 730 - V(rms) IL=7.5mA Frequency fL 40 50 80 KHz (2) Operating Lifetime Hr 40,000
-- -- Hour 7.5mA(3)
1650 at 25oC
Startup voltage Vs
-- -- V(rms)
1850
1 2
1 2
1
LCD MODULE
1 2
1 2
1 2
2
1 2
1 2
Note (1) Lamp current is measured with current meter for high frequency as shown below. Specified
values are for a single lamp. To exceed 7.5 mA, life time accelerate drop down and if to exceed 9.0 mA has safety problem. If current lower than 3.5 mA, CCFL would be unstable or damaged.
Note (2) Lamp frequency may produce interference with horizontal synchronous frequency and this
may cause ripple noise on the display. Therefore lamp frequency shall be kept away from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference.
Note (3) Lamp life time (Hr) can be defined as the time in which it continues to operate under the
condition : Ta=25±3
o
C, Typical IL value indicated in the above table and fL=48 kHz until the
brightness becomes less than 50%
Note (4) CCFL inverter should be able to provide a voltage over specified value (Vs) in the above table.
Lamp units need at least Vs value shown above to ignition.
(1)
at 0oC
INVERTER
TDK TBD332LR
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 20
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
Note (5) The voltage over specified value (Vs) should be applied to the lamp more than 1 second after
startup. Otherwise, the lamp may not be turned on. The used lamp current is the lamp typical current.
Note (6) The output voltage waveform and current waveform of the inverter must be symmetrical
(Unsymmetrical ratio is less than 10%). Please do not use the inverter which has unsymmetrical voltage and current waveform, and spike waveform. The inverter design which can provide the best optical performance, power efficiency, and lamp life should under the following conditions.
a. The asymmetry rate of the inverter waveform should be less than 10%. b. The distortion tae of the waveform should be within c. The inverter output waveform should be better similar to the ideal sine wave.
Asymmetry rate = |Ip-I-p| / Irms x 100%
istortion rate = Ip (or I-p) / Irms
D
HSD220MKW1 Specification for Roadwell Page No. 20/ 28
Revision 1.0
√
2±10%.
Ip
I-p
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 21
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
X,1049
(2)Horizontal
X,1048
X,1050
Document Title
HSD220MKW1 Specification for Roadwell Page No. 21/ 28
Document No.
6.3 Interface Timing ( DE mode)
Item Symbol Min. Typ. Max. Unit Frame Rate -- 48 60 75 Hz Frame Period t1 1068 1080 1099 line Vertical Display Time t2 1050 1050 1050 line Vertical Blanking Time t3 15 30 49 line 1 Line Scanning Time t4 870 920 1136 clock Horizontal Display Time t5 840 840 840 clock Horizontal Blanking Time t6 30 80 296 clock Clock Rate t7 48 59.61 85 MHz
Timing Diagram of Interface Signal (DE mode)
(1)Vertical
Revision 1.0
t2
t1
t3
NCLK
DE
0~5
R
0~5
G B
0~5
NCLK
DE
0~5
R
0~5
G
0~5
B
t4
X,1 X,2 X,3 X,Y
t7
1234567891011
t4
t5 t6
1671
1673
1675
1677
12
1672
1674
1676
1678
1679 1680
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 22
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
0.9VDD
0.9VDD
Document Title Document No.
6.4 Power On / Off Sequence
Power Supply
0V
0.1V
Signal
Power On
DD
TP1
HSD220MKW1 Specification for Roadwell Page No. 22/ 28
Revision 1.0
：：：：
Power Off
TP2
0.6V
TP3
0.6V
0.1V
DD
TP4
0.1V
DD
0V
Backlight
(Recommended)
TP5
50%
TP6
50%
Item Min. Typ. Max. Unit Remark
TP1 0.5 -- 10 msec TP2 0 -- 50 msec TP3 0 -- 50 msec TP4 500 -- -- msec TP5 200 -- -- msec TP6 200 -- -- msec
Note：(1) The supply voltage of the external system for the module input should be the same as the
definition of VDD.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on
before the LCD operation or the LCD truns off before the back-light turns off, the display may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or keep a high
impedance.
(4) TP4 should be measured after the module has been fully discharged between power off
and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 23
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
<Q> BM
寬橫向
| B-B’ |
Document Title
HSD220MKW1 Specification for Roadwell Page No. 23/ 28
Document No.
7.0 OUTLINE DIMENSION
7.1 Front View:
Revision 1.0
<P> BM
寬縱向
| A-A’ |
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 24
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
7.2 Back View:
HSD220MKW1 Specification for Roadwell Page No. 24/ 28
Revision 1.0
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 25
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
10
11
12
13
14
15
HSD
220MKW1
RoHS
Document Title Document No.
8.0 LOT MARK
8.1 Lot Mark
１
code 1,2,3,4,5,6: HannStar internal flow control code. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number.
Note (1) Production Year: Code 8 is defined by the last number of the year. For example:
Year 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
２
HSD220MKW1 Specification for Roadwell Page No. 25/ 28
Revision 1.0
３
４
５
６
７
８
９
Mark 1 2 3 4 5 6 7 8 9 0
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
8.2 Location of Lot Mark
(1) The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice.
Hannstar Display Corporation
MADE IN TAIWAN
-A**
Rev:
Lot mark
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 26
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
HSD220MKW1 Specification for Roadwell Page No. 26/ 28
9.0 PACKAGE SPECIFICATION
9.1 Packing form
(1) Package quantity in one carton: 6 pieces (2) Carton size: 600 x 267 x 440H (mm)
9.2 Packing assembly drawings
Revision 1.0
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 27
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Please do not leave LCD module in the environment of high humidity and high
Document Title Document No.
HSD220MKW1 Specification for Roadwell Page No. 27/ 28
Revision 1.0
10.0 GENERAL PRECAUTION
10.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.
10.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.
10.3 Breakage of LCD Panel
10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin.
10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is broken.
10.4 Electric Shock
10.4.1 Disconnect power supply before handling LCD module.
10.4.2 Do not pull or fold the CCFL cable.
10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s connector or cables in order to prevent electric shock.
10.5 Absolute Maximum Ratings and Power Protection Circuit
10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.
10.5.2
temperature for a long time.
10.5.3 It’s recommended employing protection circuit for power supply.
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Page 28
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
exclusive property of HannStar Display Corporation. It shall not be
Document Title Document No.
HSD220MKW1 Specification for Roadwell Page No. 28/ 28
Revision 1.0
10.6 Operation
10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
Use fingerstalls of soft gloves in order to keep clean display quality, when
Persons handle the LCD module for incoming inspection or assembly.
10.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other soft
material.
10.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading.
10.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a little
petroleum benzine or other adequate solvent.
10.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
10.8 Static Electricity
10.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent
from electrostatic occurrence.
10.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is
very weak to electrostatic discharge. Please be careful with electrostatic
discharge.
10.8.3 Persons who handle the module should be grounded through adequate methods.
10.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise, display characteristics may be changed.
10.10 Disposal
When disposing LCD module, obey the local environmental regulations.
The information contained in this document is the disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use