HannStar HSD220KW1-A00 Specification

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 1 / 26

Document No. Revision 1.0

Hannstar Product Information

Model : HSD220KW1

- A00

Note: 1. Please contact HannStar Display Corp. before designing your product based on this module
specification.

2. The information contained herein is presente d merely to indicate the characteristics and
performance of our products. No responsibility is assumed by HannStar for any i ntellectual property
claims or other problems that

may result from application based on the module described herein.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 2 / 26

Document No. Revision 1.0

Record of Revisions

Rev. Updated No. Date Description of change

1.0

A00 Mar.29.2006

HSD220MKW1-A product information was first issued.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 3 / 26

Document No. Revision 1.0

Contents

1.0 General Descriptions ………………………………………..p.4

2.0 Absolute Maximum Ratings ………………………….. p.5

3.0 Optical Characteristics ……………………………….. p.7

4.0 Block Diagram ………………………………………………. p.11

5.0 I/O Connection Pin Assignment …………………………… p.14

6.0 Electrical Characteristics ………………….……………… p.15

7.0 Outline Dimension …………………………….……………. p.21

8.0 Lot Mark ……………………………………………………… p.23

9.0 Package Specification ……………………………...………. p.24

10.0 General Precaution …………………………………………. p.25

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 4 / 26

Document No. Revision 1.0

1.0 GENERAL DESCRIPTIONS

1.1 Introduction

HannStar Display model HSD220MKW1-A is a color active matrix thin film transistor
(TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching
device. This model is composed of a TFT LCD panel, the voltage reference, common
voltage, DC-DC converter, column, and row driver circuit. This TFT LCD has a 22-inch
diagonally measured active display area with WSXGA+ resolution (1050 vertical by
1680 horizontal pixel array).

1.2 Features

■ 22” WSXGA+ TN(Twisted Nematic) mode TFT LCD panel

■ High speed response time

■ 4 CCFLs Backlight system

■ Supported WSXGA+ (V:1050 lines, H:1680 pixels) resolution

■ Supported 75Hz refresh rate

■ With LCD Timing Controller

■ RoHS compatible

1.3 General information

Item Specification Unit
Outline dimension 493.7×320.1×16.5 (typ.) mm
Display area 473.76 (H) x296.16 (V) mm
Number of Pixel 1680(H) x 1050(V) Pixels
Pixel pitch 0.282(H) x 0.282(V) mm
Pixel arrangement RGB Vertical stripe
Display color 16.7M (6-bit+HiFRC)
Display mode Normally white
Surface treatment Antiglare, Hard-Coating (3H)

Weight (2600) G
Back-light 4-CCFLs, Top & bottom edge side

Input signal 2-ch LVDS

Logic system TBD W

Power consumption

B/L system TBD W

1.4 Applications

■ Desktop and Multi-function monitors

■ Display terminals for AV applications

■ Monitors for industrial applications

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 5 / 26

Document No. Revision 1.0

1.5 Mechanical Information

Item Min. Typ. Max. Unit

Horizontal(H) -- 493.7 -- mm

Module Size

Vertical(V) -- 320.1 -- mm

Depth(D) -- 16.5 -- mm

Weight (without inverter) -- (2600) -- g

Torque of customer screw hole 3.0 Kgf*Cm

2.0 ABSOLUTE MAXIMUM RATINGS

2.1 Absolute Rating of Environment

Item Symbol Min. Max. Unit Note
Storage temperature T
Operating temperature T
Vibration(non-operating) V
Shock(non-operating) S
Storage humidity H
Operating humidity HOP 10 80 %RH (4)
Low pressure(operating) P
Low pressure(non-operating) P

Note (1)Storage /Operating temperature

Storage Range

-20-40

STG
OPR
NOP
NOP
STG

LOP

LNOP

Humidity (%)

100

90

80

60

40
20

10

0

0

Temperature (

-20 60 oC
0 50 oC (1)

-- 1.04 G (2)

-- 50 G (3)
10 90 %RH (3)

697 -- HPa (5)

116 -- HPa (6)

Operating Range

20 40 60

o

C)

50

65

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 6 / 26

Document No. Revision 1.0

(2) 10-500Hz sine wave, X,Y,Z each directions, 30min/cycle.

(3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test,
It is necessary to fill the silicon rubber between the shock jigs as buffer.
(4) Max wet bulb temp. =39

o

C
(5) 2 hrs. (10000 feet)
(6) 24hrs. (50000 feet)

2.2 Electrical Absolute Rating:

2.2.1 TFT LCD Module:

Item Symbol Min. Max. Unit. Note

Power supply Voltage VDD -0.3 6.0

V(DC)

(1)(2)

2.2.2 Back Light Unit:

Item Symbol Min. Max. Unit Note

Lamp current IL 3.0 9.0 mA (1)(2)(3)

Lamp frequency fL 40 80 KHz (1)(2)(3)

Note: (1) Permanent damage may occur to the LCD module if beyond this specification.

Functional operation should be restricted to the conditions described under Normal
Operating Conditions.

(2) To exceed 7.5mA, life time accelerate drop down and if to exceed 9.0 mA has safety

problem. If current lower than 3.5 mA, CCFL would be unstable or damaged.

(3) Within Ta=25±2°C

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 7 / 26

Document No. Revision 1.0

3.0 OPTICAL CHARACTERISTICS

3.1 Optical specification

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast CR -- 1000 -- (1)(2)
Response time

Rising TR -- --

Falling TF --

5

(Tr+Tf)

--

msec (1)(3)

White luminance
(center of screen)

Red

Gree

Color

n

chromaticity
(CIE1931)

Blue

White

Hor.

Viewing angle

Ver.

Hor.

Viewing angle

Ver.

Brightness uniformity B

300 cd/m

Y

L

Rx
Ry
Gx
Gy
Bx

By
Wx
Wy

Θ

-- 80 --

L

-- 80 --

Θ

R

Θ

-- 80 --

H

Θ

L

Θ

-- (88) --

L

-- (88) --

Θ

R

Θ

-- (88) --

H

Θ

L

UNI

o

Θ=0

o

φ=0

Normal
viewing

angle

CR>10

CR>5

o

Θ=0

o

φ=0

-- TBD --

-- TBD --

-- TBD --

-- TBD --

-- TBD --

-- TBD --

-- 0.310 --

-- 0.330 --

-- 80 --

-- (88) --

75 -- -- % (6)

2

(1)(5)

(1)(4)(7)

(IL=7.5mA)

3.2 Measuring Condition

■ Measuring surrounding: dark room

■ Lamp current I

■ V

=5.0V, fV=60Hz, f

DD1

■ Surrounding temperature : 25±2

■ 30min. Warm-up time.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

: (7.5)±0.1mA, lamp freq. FL= 50KHz, Inverter: TDK TBD332LR

BL

=59.61MHz

DCLK

o

C

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 8 / 26

Document No. Revision 1.0

3.3 Measuring Equipment

■ FPM520 of Westar Display technologics, INC., which utilized SR-3 for Chromaticity and
BM-5A for other optical characteristics.

■ Measuring spot size : 20~21mm

Note (1) Definition of Viewing Angle:

Φ

H

12’ o’clock

=90

H

o

Φ

Θ

L

Θ

R

Θ

=90o

L

Φ

Θ

=90o

R

L

6’ o’clock

=90

L

o

Φ

Note (2) Definition of Contrast Ratio(CR) :
measured at the center point of panel

Luminance with all pixels white (L255)
CR =
Luminance with all pixels black (L0)

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 9 / 26

Document No. Revision 1.0

Note (3) Definition of Response Time: Sum of T

and TF

R

white(TFT OFF) black (TFT ON) white(TFT OFF)

100%

90%

T

R

T

F

Optical
response

10%

0%

time

Note (4) Optical characteristic measurement setup

LCD Panel

Field = 1

o

120cm

Photo-detector (BM-5A)

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 10 / 26

Document No. Revision 1.0

Note (5) Definition of Center Luminance of White
Center Luminance= Y1

1/10V

1/10 H

1/2H

1/10H

Y1

1/2V

1/10V

Note (6) Definition of brightness uniformity

Luminance uniformity = x 100%

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

(Min Luminance of 9 points)

(Max Luminance of 9 points)

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 11 / 26

Document No. Revision 1.0

4.0 BLOCK DIAGRAM

4.1 LCD Module Block Diagram:

Connector CN1

Converter

TCON with

LVDS receiver

DC/DC

Y-driver IC

X-driver IC

Liquid Crystal Panel

1440×900 pixels

Gamma

Reference

Voltage

Generator

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 12 / 26

Document No. Revision 1.0

4.2 Back Light Unit

1 Hot 1
2 Cold 1

1 Hot 2
2 Cold 2

Back light lamp
CN2, 3, 4, 5.

1 Hot 1
2 Cold 1

1 Hot 2
2 Cold 2

4.3 Pixel Format

1,1

1,2

1,3

(odd)

(even)

(odd)

1,4

(even)

1,

1680

2,1

(odd)

LCD Display Area

1
Pixel

R

G

R

B

1050 Lines

1050

,1

R

1050
1680

1680 Pixels

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 13 / 26

Document No. Revision 1.0

4.4 Relationship Between Displayed Color and Input

MSB LSB MSB LSB MSB LSB Gray scale
Display

Black L L L L L L L L L L L L L L L L L L L L L L L L -

Blue L L L L L L L L L L L L L L L L H H H H H H H H -

Green L L L L L L L L H H H H H H H H L L L L L L L L ­Basic
color

Gray scale
of Red

Gray scale
of Green

Gray scale
of Blue

Gray scale
of White &
Black

Light Blue L L L L L L L L H H H H H H H H H H H H H H H H -

Red H H H H H H H H L L L L L L L L L L L L L L L L ­Purple H H H H H H H H L L L L L L L L H H H H H H H H ­Yellow HH H H H H HHHHHHHHHHL L L LLL L L -

White H H H H H H H H H H H H H H H H H H H H H H H H ­Black L L L L L L L L L L L L L L L L L L L L L L L L L0

Dark L L L L L L H L L L L L L L L L L L L L L L L L L2

Light H H H H H H L H L L L L L L L L L L L L L L L L L255

Red H H H H H H H H L L L L L L L L L L L L L L L L Red L255

Black L L L L L L L L L L L L L L L L L L L L L L L L L0

Dark L L L L L L L L L L L L L L H L L L L L L L L L L2

Light L L L L L L L L H H H H H H L H L L L L L L L L L255

Green L L L L L L L L H H H H H H H H L L L L L L L L Green L255

Black L L L L L L L L L L L L L L L L L L L L L L L L L0

Dark L L L L L L L L L L L L L L L L L L L L L L H L L2

Light L L L L L L L L L L L L L L L L H H H H H H L H L255

Blue L L L L L L L L L L L L L L L L H H H H H H H H Blue L255

Black L L L L L L L L L L L L L L L L L L L L L L L L L0

Dark L L L L L L H L L L L L L L H L L L L L L L H L L2

Light H H H H H H L H H H H H H H L H H H H H H H L H L253

White H H H H H H H H H H H H H H H H H H H H H H H H White L255

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

L L L L L L L H L L L L L L L L L L L L L L L L L1

↑ ︰ ︰ ︰ L3…L251
↓

H H H H H H L L L L L L L L L L L L L L L L L L L255

H H H H H H H L L L L L L L L L L L L L L L L L L255

L L L L L L L L L L L L L L L H L L L L L L L L L1

↑ ︰ ︰ ︰ L3…L251
↓

↑ ︰ ︰ ︰ L3…L251
↓

↑ ︰ ︰ ︰ L3…L251
↓

L L L L L L L L H H H H H H L L L L L L L L L L L255

L L L L L L L L H H H H H H H L L L L L L L L L L255

L L L L L L L L L L L L L L L L L L L L L L L H L1

L L L L L L L L L L L L L L L L H H H H H H L L L255

L L L L L L L L L L L L L L L L H H H H H H H L L255

L L L L L L L H L L L L L L L H L L L L L L L H L1

H H H H H H L L H H H H H H L L H H H H H H L L L252

H H H H H H H L H H H H H H H L H H H H H H H L L254

Level

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 14 / 26

Document No. Revision 1.0

5.0 I/O CONNECTION PIN ASSIGNMENT

5.1 Interface Connector (30-pins ) (HRS: MDF76GW-30S-1H or equivalent)

Pin No. Signal Description

1 RinO0- Receiver Signal (-)
2 RinO0+ Receiver Signal (+)
3 RinO1- Receiver Signal (-)
4 RinO1+ Receiver Signal (+)
5 RinO2- Receiver Signal (-)
6 RinO2+ Receiver Signal (+)
7 VSS Ground
8 RinOC- Clock Signal (-)

9 RinOC+ Clock Signal (+)
10 RinO3- Receiver Signal (-)
11 RinO3+ Receiver Signal (+)
12 RinE0- Receiver Signal (-)
13 RinE0+ Receiver Signal (+)
14 VSS Receiver Signal (+)
15 RinE1- Receiver Signal (-)
16 RinE1+ Receiver Signal (+)
17 VSS Ground
18 RinE2- Receiver Signal (-)
19 RinE2+ Receiver Signal (+)
20 RinEC- Clock Signal (-)
21 RinEC+ Clock Signal (+)
22 RinE3- Receiver Signal (-)
23 RinE3+ Receiver Signal (+)
24 VSS Ground
25 NC NC
26 NC GND
27 NC GND
28 VDD+5V Power Supply, 5V (Typical)
29 VDD+5V Power Supply, 5V (Typical)
30 VDD+5V Power Supply, 5V (Typical)

5.2 Back Light Unit (CCFL) Connectors:

CN2, 3, 4, 5: CCFL Power Source (Yeonho 35001H5-02 or equivalent)

Pin No. Symbol Color Function

1 Hot1 Pink CCFL power supply (High voltage)
2 Cold1 White Ground

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 15 / 26

Document No. Revision 1.0

6.0 ELECTRICAL CHARACTERISTICS

6.1 TFT LCD Module:

Item Symbol Min. Typ. Max. Unit Note

Voltage of power supply VDD 4.5 5.0 5.5 V

I

- TBD - mA (1)

Current of power supply

Vsync frequency fV 60 60 75 Hz (2)
Hsync frequency fH 64.8 64.8 81 KHz
Frequency f
Input rush current I

DD1

- TBD - mA (1)

I

DD2

59.61 59.61 74.52 MHz

DCLK

--- --- 2 A (3)

RUSH

Note (1)
(a)White:

(b).V-Color :

White

Yellow

Purple

Red

Cyan

Black

Blue

Green

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 16 / 26

Document No. Revision 1.0

(c)Mosaic: 2 Dot checker image

L0
Grey scale:L0~L255

L0: Luminance with all pixels black.

L255: Luminance with all pixels white.

Note (2) When fv is too low, a flicker may be occurred on the display.
Note (3) Input Rush Current condition

L31

0.9VDD

5 V

GND

0.1VDD

700us~10ms

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 17 / 26

Document No. Revision 1.0

6.2 Back-Light Unit
The back-light system is an direct-lighting type with 4CCFLs

(Cold Cathode Fluorescent Lamp).

The characteristics of the lamp are shown in the following tables.
Item Symbol Min. Typ. Max. Unit Note
Lamp current IL 3.0 7.5 9.0 mA(rms) (1)
Lamp voltage VL - TBD - V(rms) IL=7.5mA
Frequency fL 40 50 80 KHz (2)

Operating Lifetime

Hr 50,000 -- -- Hour 6.5mA(3)
Hr 40,000 -- -- Hour 7.5mA(3)

Startup voltage Vs

TBD at 25oC
TBD

-- -- V(rms)
at 0

o

C

LCD MODULE

1

2

1

2

1

2

1

2

1

2

1

2

1

2

1

2

A

A

INVERTER

TDK TBD332LR

A

A

Note (1)
Lamp current is measured with current meter for high frequency as shown below. Specified

values are for a single lamp. To exceed 7.5 mA, life time accelerate drop down and if to
exceed 9.0 mA has safety problem. If current lower than 3.5 mA, CCFL would be unstable or
damaged.

Note (2)
Lamp frequency may produce interference with horizontal synchronous frequency and this

may cause ripple noise on the display. Therefore lamp frequency shall be kept away from
the horizontal synchronous frequency and its harmonics as far as possible in order to avoid
interference.

Note (3)

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 18 / 26

Document No. Revision 1.0

Lamp life time (Hr) can be defined as the time in which it continues to operate under the
condition : Ta=25±3

o

C, Typical IL value indicated in the above table and fL=48 kHz until the

brightness becomes less than 50%

Note (4)
CCFL inverter should be able to provide a voltage over specified value (Vs) in the above

table. Lamp units need at least Vs value shown above to ignition.

Note (5)
The voltage over specified value (Vs) should be applied to the lamp more than 1 second

after startup. Otherwise, the lamp may not be turned on. The used lamp current is the lamp
typical current.

Note (6)
The output voltage waveform and current waveform of the inverter must be symmetrical

(Unsymmetrical ratio is less than 10%). Please do not use the inverter which has
unsymmetrical voltage and current waveform, and spike waveform. The inverter design
which can provide the best optical performance, power efficiency, and lamp life should
under the following conditions.

a. The asymmetry rate of the inverter waveform should be less than 10%.
b. The distortion tae of the waveform should be within √2±10%.
c. The inverter output waveform should be better similar to the ideal sine wave.

Ip

I-p

Asymmetry rate = |I
Distortion rate = I

p-I-p| / Irms x 100%

p (or I-p) / Irms

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

(2)

Document Title HSD220MKW1- A Product Information Page No. 19 / 26

Document No. Revision 1.0

6.3 Interface Timing ( DE mode)

Item Symbol Min. Typ. Max. Unit
Frame Rate -- 60 60 75 Hz
Frame Period t1 - 1080 - line
Vertical Display Time t2 - 1050 - line
Vertical Blanking Time t3 - 30 - line
1 Line Scanning Time t4 - 1840 - clock
Horizontal Display Time t5 - 1680 - clock
Horizontal Blanking Time t6 - 160 - clock
Clock Rate t7 59.61 59.61 74.52 MHz

Timing Diagram of Interface Signal (DE mode)

DE

0~5

R

0~5

G

0~5

B

Horizontal

NCLK

DE

0~5

R

0~5

G

0~5

B

X,1 X,2 X,3 X,Y

t7

1234567891011

X,1048 X,1050

X,1049

t4

t5 t6

1671

1673

1675

1677

12

1672

1674

1676

1678

1679
1680

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 20 / 26

Document No. Revision 1.0

6.4 Power On / Off Sequence：

Power On

Power Off

Power Supply

0.9VDD

0.9V

DD

0V

0.1V

DD

TP1

0.1V

DD

0.1VDD

Signal

0V

TP2

0.6V 0.6V

TP3

TP4

Backlight

(Recommended)

TP5

50%

TP6

50%

Item Min. Typ. Max. Unit Remark

TP1 0.7 -- 10 msec
TP2 0 -- 50 msec
TP3 0 -- 50 msec
TP4 500 -- -- msec
TP5 200 -- -- msec
TP6 200 -- -- msec

Note：(1) The supply voltage of the external system for the module input should be the same as the

definition of V

DD

.

(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on

before the LCD operation or the LCD truns off before the back-light turns off, the display
may momentarily become white.

(3) In case of VDD = off level, please keep the level of input signal on the low or keep a

high impedance.

(4) TP4 should be measured after the module has been fully discharged between power off

and on period.

(5) Interface signal shall not be kept at high impedance when the power is on.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Q

寬橫向

Document Title HSD220MKW1- A Product Information Page No. 21 / 26

Document No. Revision 1.0

7.0 OUTLINE DIMENSION

7.1 Front View:

<P> BM
<

> BM

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

寬縱向

| A-A’ |

| B-B’ |

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 22 / 26

Document No. Revision 1.0

7.2 Back View:

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 23 / 26

Document No. Revision 1.0

8.0 LOT MARK

8.1 Lot Mark

１ ２ ３ ４ ５ ６ ７ ８ ９

10 11 12 13 14 15

code 1,2,3,4,5,6: HannStar internal flow control code.
code 7: production location.
code 8: production year.
code 9: production month.
code 10,11,12,13,14,15: serial number.

Note (1) Production Year

Year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008

Mark 9 0 1 2 3 4 5 6 7 8

Note (2) Production Month

Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.

Mark 1 2 3 4 5 6 7 8 9 A B C

8.2 Location of Lot Mark

(1) The label is attached to the backside of the LCD module.
(2) This is subject to change without prior notice.

HSD220MKW1

-A00

Rev:

RoHS

Hannstar Display Corporation

MADE IN TAIWAN

Lot mark

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 24 / 26

Document No. Revision 1.0

9.0 PACKAGE SPECIFICATION

9.1 Packing form

(1) package quantity in one carton: 6 pieces
(2) carton size: TBD
(3) for domestic transportation only.

9.2 Packing assembly drawings

TBD

9.3 Pallet transportation specification(TBD)

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 25 / 26

Document No. Revision 1.0

10.0 GENERAL PRECAUTION

10.1 Use Restriction

This product is not authorized for use in life supporting systems, aircraft navigation
control systems, military systems and any other application where performance failure
could be life threatening or otherwise catastrophic.

10.2 Disassembling or Modification

Do not disassemble or modify the module. It may damage sensitive parts inside LCD
module, and may cause scratches or dust on the display. HannStar does not warrant the
module, if customers disassemble or modify the module.

10.3 Breakage of LCD Panel

10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid

crystal, and do not contact liquid crystal with skin.

10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.

10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.

10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is
broken.

10.4 Electric Shock

10.4.1 Disconnect power supply before handling LCD module.

10.4.2 Do not pull or fold the CCFL cable.

10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s

connector or cables in order to prevent electric shock.

10.5 Absolute Maximum Ratings and Power Protection Circuit

10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage

variation, input voltage variation, variation in parts’ parameters, environmental
temperature, etc., otherwise LCD module may be damaged.

10.5.2 Please do not leave LCD module in the environment of high humidity and high

temperature for a long time.

10.5.3 It’s recommended employing protection circuit for power supply.

10.6 Operation

10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil

lead.

Use fingerstalls of soft gloves in order to keep clean display quality, when

persons Handle the LCD module for incoming inspection or assembly.

10.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other

soft material.

10.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color
fading.

10.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a little

petroleum benzene or other adequate solvent.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.

HannStar Display Corp.

Document Title HSD220MKW1- A Product Information Page No. 26 / 26

Document No. Revision 1.0

10.7 Mechanism

Please mount LCD module by using mounting holes arranged in four corners tightly.

10.8 Static Electricity

10.8.1 Protection film must remove very slowly from the surface of LCD module t o

prevent from electrostatic occurrence.

10.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is

very weak to electrostatic discharge. Please be careful with electrostatic

discharge.

10.8.3 Persons who handle the module should be grounded through adequate

methods.

10.9 Strong Light Exposure

The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.

10.10 Disposal

When disposing LCD module, obey the local environmental regulations.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.