How it Works
HannStar
Loading...
HSD190MEN6-A
Specification
25 pgs620.86 Kb0

HannStar HSD190MEN6-A Specification

Download
Page 1
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 1 / 25
Document No. Revision 2.0
To : Solomon
Date : Dec., 19, 2012
Formal Specification
Model : HSD190MEN6 - A**
Note: 1. The information contained herein is preliminary and may be changed without prior noticed.
2. Please contact HannStar Display Corp. before designing your product based on this module specification.
3. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems
that may result from application based on the module described herein.
be disclo Corporation.
Page 2
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 2 / 25
Document No. Revision 2.0
Record of Revisions
Rev.
1.0
1.1
1.2
1.3
2.0
Date Sub-Model
Jun. 26,2012
Aug 17, 2012
Sept 6, 2012
Sept18, 2012
Nov 8, 2012
A**
A**
A**
A**
A**
Description of change
HSD 190MEN6-A** formal specification was 1st issued
P29 Add supplier code for HP.
P15 Update current of power supply.
P20 Update outline drawing.
P30 Add glass surface temperature information (for Dell only).
P31 Update interface timing (for Dell only).
P12 Update 4.2 LED light bar connector description.
P15 Update 6.1 min. value of frequency.
P6 Add note information.
be disclo Corporation.
Page 3
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 3 / 25
Document No. Revision 2.0
Contents
1.0 General Descriptions ……………………………….… p.4
2.0 Absolute Maximum Ratings ………………………….. p.5
3.0 Optical Characteristics ……………………………….. p.7
4.0 Block Diagram ………………………………………… p.11
5.0 I/O Connection Pin Assignment …………………….. p.14
6.0 Electrical Characteristics ………………….……….. p.15
7.0 Outline Dimension …………………………….……… p.21
8.0 Lot Mark ……………………………………………….. p.25
9.0 Package Specification ……………………………...… p.26
10.0 General Precaution …………………………………… p.27
be disclo Corporation.
Page 4
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 4 / 25
Document No. Revision 2.0
1.0 GENERAL DESCRIPTIONS
1.1 Introduction
HannStar Display model HSD190MEN6-A* is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, the voltage reference, common voltage, DC-DC converter, column, and row driver circuit. This TFT LCD has a 19-inch diagonally measured active display area with SXGA resolution (1024 vertical by 1280 horizontal pixel array) .
1.2 Features
■ 19”SXGA TFT LCD Panel
■ LED Backlight System
■ Supported SXGA (V:1024 lines, H:1280 pixels) Resolution
■ Supported to 75Hz Refresh Rate
■ LCD Timing Controller
■ RoHS Compliance
■ VESA Compatible
■ Halogen Free
1.3 Applications
■ Desktop Monitors
■ Display terminals for AV applications
■ Monitors for industrial applications
1.4 General information
Item Specification
Outline dimension 396 * 324 * 9.9(Typ) mm
Display area 376.32 (H) x301.056 (V) (19.0” diagonal) mm
Number of Pixel 1280(H) x 1024(V) Pixels
Pixel pitch 0.294(H) x 0.294(V) mm
Pixel arrangement RGB Vertical Stripe
Display color 16.7M (6-bits+Hi FRC)
Color temperature 6500K
Display mode Normally white
Surface treatment Antiglare, Hard-Coating (3H)
Weight 1600 g
Back-light White LED
Input signal 2-ch LVDS
System 3.6(Typ.), 4.2(Max.) L0 pattern
Power consumption
B/L 11.83 (Max.)
Unit
W
be disclo Corporation.
Page 5
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
20 40 60
50
65
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 5 / 25
Document No. Revision 2.0
Remark(1): There are two functions, brightness and contrast tuning, to let luminance to 125cd/m2 in OSD. OSD shouldn't restrict the panel's G-T curve for
brightness to be 125cd/m2. The higher contrast, the higher angular uniformity. That is to say, if OSD want to tune the panel's luminance to 125 cd/m2, the
suitable way is to only tune the brightness function. And if tuning the brightness function to 125 cd/m2, it would be better only to tuning the inverter, not the
gray level.
1.5 Mechanical Information
Item Min. Typ. Max. Unit
Horizontal(H) 395.5 396.0 396.5 mm
Module Size
Vertical(V) 323.5 324.0 324.5 mm
Depth(D) 9.9 mm
Weight (without inverter) 1400 1600 1800 g
Torque of customer screw hole -- -- 3.0 Kgf*Cm
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item Symbol Min. Max. Unit Note
Storage temperature T
Operating temperature T
Vibration (non-operating) V
Shock (non-operating) S
Storage humidity H
Operating humidity HOP 10 90 %RH (4)
Low pressure (operating) P
Low pressure (non-operating) P
Note 1 (1)Storage /Operating temperature
Storage Range
-40
-20
STG
OPR
NOP
NOP
STG
LOP
LNOP
Humidity (%)
100
90
80
60
40
20
10
0
0
Temperature (oC)
-20 60
0 50
o
C
o
C (1)
-- 1.5 G (2)
-- 70 G (3)
10 90 %RH (3)
697 -- HPa (5)
116 -- HPa (6)
be disclo Corporation.
Page 6
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 6 / 25
Document No. Revision 2.0
(2) 5-500-5Hz sine wave, X, Y, Z each directions, 30 min/cycle. (3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test, It is necessary to fill the silicon rubber between the shock jig as buffer. (4) Max wet bulb temp. =39oC (5) 2 hrs. (10000 feet) (6) 24hrs. (50000 feet) Note 2: There is no display function NG issue occurred, all the cosmetic specification is
judged before the reliability stress.
2.2 Electrical Absolute Rating:
2.2.1 TFT LCD Module:
Item Symbol Min. Max. Unit. Note
Power supply Voltage VDD -0.3 5.5 V(DC) (1)(2)
2.2.2 Back Light Unit:
Item Symbol Typ. Max. Unit Note
LED current IF 60 65 mA (1)(2)(3)
LED Voltage VF 3.4 3.6 Volt (1)(2)(3)
Note: (1) Permanent damage may occur to the LCD module if beyond this specification.
Functional operation should be restricted to the conditions described under Normal
Operating Conditions.
(2) To exceed 65mA, life time accelerate drop down.
(3) Within Ta=25±2°C
be disclo Corporation.
Page 7
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 7 / 25
Document No. Revision 2.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max.
Contrast CR 700 1000
Rising
Response time
TR +TF
-- 5 10 msec
Falling
-- (1)(2)
Unit Note
(1)(3)
White luminance (center of screen)
Red
Gree
Color
n
chromaticity (CIE1931)
Blue
White
Hor.
Viewing angle
Ver.
Hor.
Viewing angle
Ver.
Brightness uniformity B
YL 200 250 -- cd/m
Θ
=0o
Rx
Ry
Gx
φ=0o
Normal viewing
angle
Gy
Bx
By
Wx
Wy
Θ
75
L
Θ
75
R
Θ
70
H
Θ
L
Θ
75
L
Θ
75
R
Θ
75
H
Θ
L
UNI
CR>10
CR>5
Θ
=0o
φ=0o
-0.03
70
75
75 -- -- % (6)
0.643
0.337
0.322
0.637
0.152
0.049
0.313
0.329
85
85
80
80
85
85
85
85
+0.03
--
--
--
--
--
--
--
--
2
(1)(4)
(1)(4)
3.2 Measuring Condition
■ Measuring surrounding: dark room
■ Each LED current is 60 mA
■ V
■ Surrounding temperature: 25±2oC
■ 20min. Warm-up time.
be disclo Corporation.
=5.0V, fV=60Hz, f
DD1
=54MHz
DCLK
Page 8
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
o
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 8 / 25
Document No. Revision 2.0
3.3 Measuring Equipment
■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and BM-5A for other optical characteristics.
■ Measuring spot size: 20~21mm
Note (1) Definition of Viewing Angle:
ΦH
12’ o’clock
ΦH=90
o
Θ
L
Θ
R
ΘL=90
ΘR=90o
ΦL
Note (2) Definition of Contrast Ratio(CR) : measured at the center point of panel
Luminance with all pixels white (L255) CR = Luminance with all pixels black (L0)
6’ o’clock
ΦL=90
o
be disclo Corporation.
Page 9
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 9 / 25
Document No. Revision 2.0
Note (3) Definition of Response Time: Sum of TR and TF
white(TFT OFF) black (TFT ON) white(TFT OFF)
100%
90%
T
R
T
F
Optical
response
10%
0%
time
Note (4) Optical characteristic measurement setup
LCD Panel
Field = 1
o
50cm
Photo-detector (BM-5A)
be disclo Corporation.
Page 10
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Y1
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 10 / 25
Document No. Revision 2.0
Note (5) Definition of Center Luminance of White (center) Center Luminance= Y1
1/10V
1/10 H
1/2H
1/10H
1/2V
1/10V
Note (6) Definition of brightness uniformity
Luminance uniformity = x 100%
(Min Luminance of 9 points)
(Max Luminance of 9 points)
be disclo Corporation.
Page 11
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 11 / 25
Document No. Revision 2.0
4.0 BLOCK DIAGRAM
4.1 LCD Module Block Diagram:
Connector CN1
Converter
TCON with
LVDS receiver
DC/DC
Y-driver IC
X-driver IC
Liquid Crystal Panel
1280×1024 pixels
Gamma
Reference
Voltage
Generator
be disclo Corporation.
Page 12
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
1024
280
LCD Display Area
B
(even)
(odd)
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 12 / 25
Document No. Revision 2.0
4.2 Back Light Unit
Back View
LED Light Bar Connector
Light Bar
4.3 Pixel Format
1,1
1,2
1,3
(odd)
2,1
(odd)
1,4
(even)
1280
1,
1 Pixel
R
G
R
1024 Lines
1024
,1
R
1
1280 Pixels
be disclo Corporation.
Page 13
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
H H H H H L L L L L L L L L L
H H H H H L L
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 13 / 25
Document No. Revision 2.0
4.4 Relationship Between Displayed Color and Input
MSB LSB MSB LSB MSB LSB Gray scale Display
Basic color
Gray scale of Red
Gray scale of Green
Gray scale of Blue
Gray scale of White & Black
Black L L L L L L L L L L L L L L L L L L L L L L L L
Blue L L L L L L L L L L L L L L L L H H H H H H H H
Green L L L L L L L L H H H H H H H H L L L L L L L L
Light Blue L L L L L L L L H H H H H H H H H H H H H H H H
Red H H H H H H H H L L L L L L L L L L L L L L L L Purple H H H H H H H H L L L L L L L L H H H H H H H H Yellow H H H H H H H H H H H H H H H H L L L L L L L L
White H H H H H H H H H H H H H H H H H H H H H H H H Black L L L L L L L L L L L L L L L L L L L L L L L L
Dark L L L L L L H L L L L L L L L L L L L L L L L L
Light H H H H H H L H L L L L L L L L L L L L L L L L L253
Red H H H H H H H H L L L L L L L L L L L L L L L L Red L255
Black L L L L L L L L L L L L L L L L L L L L L L L L
Dark L L L L L L L L L L L L L L H L L L L L L L L L
Light L L L L L L L L H H H H H H L H L L L L L L L L L253
Green L L L L L L L L H H H H H H H H L L L L L L L L Green L255
Black L L L L L L L L L L L L L L L L L L L L L L L L
Dark L L L L L L L L L L L L L L L L L L L L L L H L
Light L L L L L L L L L L L L L L L L H H H H H H L H L253
Blue L L L L L L L L L L L L L L L L H H H H H H H H Blue L255
Black L L L L L L L L L L L L L L L L L L L L L L L L
Dark L L L L L L H L L L L L L L H L L L L L L L H L
Light H H H H H H L H H H H H H H L H H H H H H H L H L253
White H H H H H H H H H H H H H H H H H H H H H H H H White L255
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
L L L L L L L H L L L L L L L L L L L L L L L L
↑ ↓
H H H H H H L L L L L L L L L L L L L L L L L L L252
H H H H H H H L L L L L L L L L L L L L L L L L L254
L L L L L L L L L L L L L L L H L L L L L L L L
↑ ↓
L L L L L L L L H
L L L L L L L L H H H H H H H L L L L L L L L L L254
L L L L L L L L L L L L L L L L L L L L L L L H
↑ ↓
L L L L L L L L L L L L L L L L H
L L L L L L L L L L L L L L L L H H H H H H H L L254
L L L L L L L H L L L L L L L H L L L L L L L H
↑ ↓
H H H H H H L L H H H H H H L L H H H H H H L L L252
H H H H H H H L H H H H H H H L H H H H H H H L L254
︰
︰
︰
︰
︰
︰
︰
︰
︰
L3…L251
︰
L3…L251
︰
L3…L251
︰
L3…L251
Level
L0 L1 L2
L0 L1 L2
L252
L0 L1 L2
L252
L0 L1 L2
-
-
-
-
-
-
-
-
be disclo Corporation.
Page 14
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 14 / 25
Document No. Revision 2.0
5.0 I/O CONNECTION PIN ASSIGNMENT
5.1 Interface Connector (30-pins, P-TWO 187098-30091, JAE FI-XB30SSRL-HF16 or equivalent)
Pin No. Signal Description
1 RxOIN0- Negative LVDS differential data input (Odd data) 2 RxOIN0+ Positive LVDS differential data input (Odd data) 3 RxOIN1- Negative LVDS differential data input (Odd data) 4 RxOIN1+ Positive LVDS differential data input (Odd data) 5 RxOIN2- Negative LVDS differential data input (Odd data) 6 RxOIN2+ Positive LVDS differential data input (Odd data) 7 GND Power ground 8 RxOCLKIN- Negative LVDS differential clock input (Odd clock)
9 RxOCLKIN + Positive LVDS differential clock input (Odd clock) 10 RxOIN 3- Negative LVDS differential data input (Odd data) 11 RxOIN 3+ Positive LVDS differential data input (Odd data) 12 RxEIN0- Negative LVDS differential data input (Even data) 13 RxEIN0+ Positive LVDS differential data input (Even data) 14 GND Power ground 15 RxEIN1- Positive LVDS differential data input (Even data) 16 RxEIN1+ Negative LVDS differential data input (Even data) 17 GND Power ground 18 RxEIN2- Negative LVDS differential data input (Even data) 19 RxEIN2+ Positive LVDS differential data input (Even data) 20 RxECLKIN- Negative LVDS differential clock input (Even clock) 21 RxECLKIN + Positive LVDS differential clock input (Even clock) 22 RxEIN3- Negative LVDS differential data input (Even data) 23 RxEIN3+ Positive LVDS differential data input (Even data) 24 GND Power ground 25 GND Power ground 26 NC No connection 27 NC No connection 28 Power Power +5V 29 Power Power +5V 30 Power Power +5V
5.2 LED Board Pin Assignment:
CN102: LED Power Source Connector (Entery Industrial Co., Ltd 3707K-Q06N-01R or
equivalent)
Pin No Symbol Description
1 2 3 4 5 6
IRLED IRLED
VLED
VLED IRLED3 IRLED4
Current out Current out
Voltage in Voltage in
Current out Current out
be disclo Corporation.
Page 15
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
0.9VDD
GND
V
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 15 / 25
Document No. Revision 2.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module:
Item Symbol
Min. Typ. Max. Unit Note
Voltage of power supply VDD 4.5 5.0 5.5 V
Current of power supply I
DD0
--
720 840 mA (1)
Vsync frequency fV 50 60 76 Hz (2)
Hsync frequency fH 53.3 64 80 KHz
Frequency f
Input rush current I
50 54 67.5 MHz
DCLK
-- -- 3.0 A (3)
RUSH
Note (1) VDD =5.0V, Black pattern (L0), Frame Rate 60Hz
Note (2) When fv is too low, a flicker may be occurred on the display. Note (3) Input Rush Current condition
0.1VDD
5
500us~10ms
be disclo Corporation.
Page 16
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
LED Operation Current
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 16 / 25
Document No. Revision 2.0
6.2 Back-Light Unit
Parameter Symbol Min Typ Max Units Condition
IF --- 60 65 mA
Light Bar Input Voltage
LED Power
consumption
VF 37.7
P
--- 10.608 11.83 Watt
LED
44.2 45.5 Volt
LED Life-Time N/A -- 30,000 -- Hour
Notes (1) The specified values are for a single LED lightbar.
Notes (2) The specified current is input LED chip 100% duty current.
Notes (3) Calculator value for reference P=IF x VF x N (LED Parallel Qty’)
Notes (4) The LED lifetime defines as the estimated time to 50% degradation of
original luminance
Notes (5) For better LED light bar driving quality, it is recommended to utilize the
adaptive boost converter with current balancing function to drive LED light-bar.
Ta=25℃
Ta=25℃
Ta=25℃
Note (1)
Ta=25℃
IF=60mA
Note (2)
be disclo Corporation.
Page 17
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Symbol
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 17 / 25
Document No. Revision 2.0
6.3 Switching Characteristics for LVDS Receiver
Item
Differential Input High Threshold Vth
Differential Input Low Threshold
Input Current I
Differential input Voltage |VID|
Common Mode Voltage Offset V
Clock Frequency fc 50 54
Vtl -100
IN
CM
Differential Signal Diagram
Min. Typ.
－
-10
0.1
1.15
－ －
－
－ －
Max. Unit
+100 mV
－
+10 uA
0.6 V
1.35 V
67.5 MHz
mV
Conditions
V
=1.25V
CMLVDS
VIN=2.4V/0V,
VDD=3.6V
6.4 Interface Timing ( DE mode)
be disclo Corporation.
Item Symbol Min. Typ. Max. Unit Frame Rate Frame Period t1 1029 1066 1150 line Vertical Display Time t2 1024 1024 1024 line Vertical Blanking Time t3 5 42 126 line 1 Line Scanning Time t4 720 844 875 clock Horizontal Display Time t5 640 640 640 clock Horizontal Blanking Time t6 80 204 235 clock Clock Rate t7 50 54 67.5 MHz
-- 50 60 76 Hz
Page 18
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 18 / 25
Document No. Revision 2.0
Timing Diagram of Interface Signal (DE mode)
t1
t1
t1t1 t2
t2 t3
t2t2
t3
t3t3
NCLK
t4
t4
t4t4
DE
X,
X,
X,
X,
X,
R,G,B[0:7]
X,1
X,1 X,2
X,1X,1
t7
t7
t7t7
X,2 X,3
X,3 X,4
X,2X,2
X,3X,3
X,4 X,Y
X,4X,4
X,Y
X,YX,Y
t4
t4
t4t4
X,X,
1022
1022
10221022
1023
1023
10231023
X,
X,X,
1024
1024
10241024
X,X,
X,1
X,1 X,2
X,1X,1
X,2
X,2X,2
NCLK
DE
R,G,B[0:7]
123
t5
t5 t6
t5t5
7
5
4
6
91011
8
12
1269 1270
1271 1272
1273 1274
1275 1276
1277 1278
1279 1280
t6
t6t6
12345
6
be disclo Corporation.
Page 19
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
0.9V
0.9V
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 19 / 25
Document No. Revision 2.0
6.5 Power On / Off Sequence
：：：：
Power On
Power Off
Power Supply
0.1V
0V
DD
Signal
0V
Backlight
(Recommended)
TP1
TP2
0.6V
TP5
50%
TP3
0.6V
TP6
50%
0.1V
DD
TP4
0.1V
DD
Item Min. Typ. Max. Unit Remark TP1 0.5 -- 10 msec TP2 0 -- 50 msec TP3 0 -- 50 msec TP4 500 -- -- msec TP5 200 -- -- msec TP6 200 -- -- msec
Note：(1) The supply voltage of the external system for the module input should be the same as the
definition of VDD.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on
before the LCD operation or the LCD truns off before the back-light turns off, the display
may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or keep a high
impedance.
(4) TP4 should be measured after the module has been fully discharged between power off
and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
be disclo Corporation.
Page 20
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 20 / 25
Document No. Revision 2.0
7.0 OUTLINE DIMENSION
7.1 190MEN6-A Front View:
be disclo Corporation.
Page 21
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 21 / 25
Document No. Revision 2.0
7.2 190MEN6-A Back View:
HSDXXXXXXX
-AXX
R
ev: X
HannStar
HannStar Display Corporation
be disclo Corporation.
Page 22
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
２
３
４
５
６
７
８
９
10
11
12
13
14
15
Rev:
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 22 / 25
Document No. Revision 2.0
8.0 LOT MARK
8.1 Lot Mark
１
code 1,2,3,4,5,6: HannStar internal flow control code. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number.
Note (1) Production Year: Code 8 is defined by the last number of the year. For example:
Year 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
Mark 6 7 8 9 0 1 2 3 4 5
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
8.2 Location of Lot Mark
(1) The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice.
HSD190MEN6-A*
GP-HF
Lot mark
HannStar
HannStar Display Corporation
ev: X
R
HSDXXXXXXX
-AXX
be disclo Corporation.
Page 23
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
M1913
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 23 / 25
Document No. Revision 2.0
9.0 PACKAGE SPECIFICATION
9.1 Packing form
(1) package quantity in one carton: 10 pieces.
(2) carton size: 544 mm×302 mm×446H mm.
(3) for domestic transportation only.
9.2 Packing assembly drawings
10pcs
be disclo Corporation.
Page 24
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 24 / 25
Document No. Revision 2.0
10.0 GENERAL PRECAUTION
10.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.
10.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.
10.3 Breakage of LCD Panel
10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin.
10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is
broken.
10.4 Electric Shock
10.4.1 Disconnect power supply before handling LCD module.
10.4.2 Do not pull or fold the CCFL cable.
10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s connector or cables in order to prevent electric shock.
10.5 Absolute Maximum Ratings and Power Protection Circuit
10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.
10.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time.
10.5.3 It’s recommended employing protection circuit for power supply.
10.6 Operation
10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
Use fingerstalls of soft gloves in order to keep clean display quality, when persons
handle the LCD module for incoming inspection or assembly.
10.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.
10.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color
fading.
11.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzene or other adequate solvent.
be disclo Corporation.
Page 25
H a n n S t a r D i s p l a y C o r p .
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD190MEN6-A Formal Specification for Solomon Page No. 25 / 25
Document No. Revision 2.0
10.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
10.8 Static Electricity
10.8.1 Protection film must remove very slowly from the surface of LCD module to prevent
from electrostatic occurrence.
10.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is
very weak to electrostatic discharge. Please be careful with electrostatic
discharge.
10.8.3 Persons who handle the module should be grounded through adequate methods.
10.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise, display characteristics may be changed.
10.10 Disposal
When disposing LCD module, obey the local environmental regulations.
be disclo Corporation.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use