Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 1 / 26
Document No. DC130-004301 Revision 1.0
To : Solomon
Date : 2009.10.12
Customer Acceptance Specification
www.panelook.com
Model : HSD190MEN4
- A++
Accepted by:
Signature Data
_____________________
Note:
1. Please contact Hannstar Display Corp. before designing your product based on this module specification.
2.The information contained herein is presented merely to indicate the characteristics and performance of
our products. No responsibility is assumed by Hannstar for any intellectual property claims or other
problems that may result from application based on the module described herein.
______________________
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 2 / 26
Document No. DC130-004301 Revision 1.0
Rev. Date Sub-Model Description of change
1.0
Oct. 09,2009 A++ HSD 190MEN4-A++ Formal Specification was 1
www.panelook.com
Record of Revisions
st
issued.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 3 / 26
Document No. DC130-004301 Revision 1.0
1.0 General Descriptions ……………………………….… p.4
www.panelook.com
Contents
2.0 Absolute Maximum Ratings ………………………….. p.5
3.0 Optical Characteristics ……………………………….. p.7
4.0 Block Diagram ………………………………………… p.11
5.0 I/O Connection Pin Assignment …………………….. p.14
6.0 Electrical Characteristics ………………….……….. p.15
7.0 Outline Dimension …………………………….……… p.21
8.0 Lot Mark ……………………………………………….. p.23
9.0 Package Specification ……………………………...… p.24
10.0 General Precaution …………………………………… p.25
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 4 / 26
Document No. DC130-004301 Revision 1.0
1.0 GENERAL DESCRIPTIONS
1.1 Introduction
HannStar Display model HSD190MEN4-A is a color active matrix thin film transistor (TFT) liquid
crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is
composed of a TFT LCD panel, the voltage reference, common voltage, DC-DC converter, column,
and row driver circuit. This TFT LCD has a 19-inch diagonally measured active display area with
SXGA resolution (1024 vertical by 1280 horizontal pixel array) .
1.2 Features
Ŷ 19”SXGA TFT LCD Panel
Ŷ 2 CCFLs Backlight System
Ŷ Supported SXGA (V:1024 lines, H:1280 pixels) Resolution
Ŷ Supported to 75Hz Refresh Rate
Ŷ LCD Timing Controller
Ŷ RoHS Compliance
Ŷ VESA Compatible
Ŷ Halogen Free
www.panelook.com
1.3 Applications
Ŷ Desktop Monitors
Ŷ Display terminals for AV applications
Ŷ Monitors for industrial applications
1.4 General information
Item Specification
Outline dimension 396 * 324 * 16.5(Typ) mm
Display area 376.32 (H) x301.056 (V) (19.0” diagonal) mm
Number of Pixel 1280(H) x 1024(V) Pixels
Pixel pitch 0.294(H) x 0.294(V) mm
Pixel arrangement RGB Vertical Stripe
Display color 16.7M (6-bits+Hi FRC)
Color temperature 6500K
Display mode Normally white
Surface treatment Antiglare, Hard-Coating (3H)
Weight 1950 g
Back-light 2-CCFLs, Top & bottom edge side
Input signal 2-ch LVDS
System 3.5(Typ.)
Power consumption
B/L 9.9(Typ.)
Unit
W
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 5 / 26
Document No. DC130-004301 Revision 1.0
Remark(1): There are two functions, brightness and contrast tuning, to let luminance to 125cd/m2 in OSD. OSD shouldn't restrict the panel's G-T curve for
brightness to be 125cd/m2. The higher contrast, the higher angular uniformity. That is to say, if OSD want to tune the panel's luminance to 125 cd/m2, the
suitable way is to only tune the brightness function. And if tuning the brightness function to 125 cd/m2, it would be better only to tuning the inverter, not the
gray level.
1.5 Mechanical Information
Item Min. Typ. Max. Unit
www.panelook.com
Horizontal(H) 395.5 396.0 396.5 mm
Module Size
Vertical(V) 323.5 324.0 324.5 mm
Depth(D) 16.5 mm
Weight (without inverter) -- 1950 -- g
Torque of customer screw hole -- -- 3.0 Kgf*Cm
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item Symbol Min. Max. Unit Note
Storage temperature T
Operating temperature T
Vibration (non-operating) V
Shock (non-operating) S
Storage humidity H
Operating humidity HOP 10 90 %RH (4)
Low pressure (operating) P
Low pressure (non-operating) P
Note (1)Storage /Operating temperature
STG
OPR
NOP
NOP
STG
LOP
LNOP
Humidity (%)
-20 60 oC
0 50 oC (1)
-- 1.5 G (2)
-- 70 G (3)
10 90 %RH (3)
697 -- HPa (5)
116 -- HPa (6)
100
90
80
60
Storage Range
-20-40
40
20
10
0
0
Temperature (
20 40 60
o
C)
50
65
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 6 / 26
Document No. DC130-004301 Revision 1.0
(2) 5-500-5Hz sine wave, X, Y, Z each directions, 30 min/cycle.
(3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test,
It is necessary to fill the silicon rubber between the shock jig as buffer.
(4) Max wet bulb temp. =39
(5) 2 hrs. (10000 feet)
(6) 24hrs. (50000 feet)
2.2 Electrical Absolute Rating:
2.2.1 TFT LCD Module:
Item Symbol Min. Max. Unit. Note
Power supply Voltage VDD -0.3 5.5 V(DC) (1)(2)
2.2.2 Back Light Unit:
www.panelook.com
o
C
Item Symbol Min. Max. Unit Note
Lamp current IL 3.0 8.0 mA (1)(2)(3)
Lamp frequency fL 40 80 KHz (1)(2)(3)
Note: (1) Permanent damage may occur to the LCD module if beyond this specification.
Functional operation should be restricted to the conditions described under Normal
Operating Conditions.
(2) To exceed 7.5mA, life time accelerate drop down and if to exceed 8.0 mA has safety
problem. If current lower than 3.0 mA, CCFL would be unstable or damaged.
(3) Within Ta=25±2°C
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 7 / 26
Document No. DC130-004301 Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR 640 800 -- (1)(2)
Rising
Response time
Falling
www.panelook.com
TR +TF -- 4 8 msec (1)(3)
White luminance
(center of screen)
Red
Gree
Color
n
chromaticity
(CIE1931)
Blue
White
Hor.
Viewing angle
Ver.
Hor.
Viewing angle
Ver.
Brightness uniformity B
200 250 -- cd/m
Y
L
Rx
Ry
Gx
Gy
Bx
By
Wx
Wy
75
L
75
R
65
H
L
75
L
75
R
75
H
L
UNI
o
=0
o
φ=0
Normal
viewing
angle
CR>10
CR>5
o
=0
o
φ=0
0.646
0.334
0.289
-0.03
75
75
0.631
0.141
0.071
0.313
0.329
85
85
75
85
85
85
85
85
+0.03
--
--
--
--
--
--
--
--
75 -- -- % (6)
(1)(4)
2
(IL=7.5mA)
(1)(4)
3.2 Measuring Condition
Ŷ Measuring surrounding: dark room
Ŷ Lamp current I
Ŷ V
=5.0V, fV=60Hz, f
DD1
Ŷ Surrounding temperature: 25±2
: (7.5) mA, Inverter: TBD
BL
=54MHz
DCLK
o
C
Ŷ 30min. Warm-up time.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 8 / 26
Document No. DC130-004301 Revision 1.0
3.3 Measuring Equipment
Ŷ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and
BM-5A for other optical characteristics.
Ŷ Measuring spot size: 20~21mm
Note (1) Definition of Viewing Angle:
www.panelook.com
ӥ
H
12’ o’clock
ӥ
=90
H
o
Ә
ӘL=90
L
o
ӥ
L
Ә
R
6’ o’clock
o
=90
ӥ
L
Note (2) Definition of Contrast Ratio(CR) :
measured at the center point of panel
Luminance with all pixels white (L255)
CR =
Luminance with all pixels black (L0)
ӘR=90
o
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 9 / 26
Document No. DC130-004301 Revision 1.0
www.panelook.com
Note (3) Definition of Response Time: Sum of TR and T
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
R
100%
90%
Optical
response
10%
0%
Note (4) Optical characteristic measurement setup
LCD Panel
Field = 1
F
T
F
time
o
Photo-detector (BM-5A)
120cm
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 10 / 26
Document No. DC130-004301 Revision 1.0
Note (5) Definition of Center Luminance of White (center)
Center Luminance= Y1
www.panelook.com
1/10 H
1/10H
1/2H
1/10V
Y1
1/2V
1/10V
Note (6) Definition of brightness uniformity
(Min Luminance of 9 points)
Luminance uniformity = x 100%
(Max Luminance of 9 points)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 11 / 26
Document No. DC130-004301 Revision 1.0
4.0 BLOCK DIAGRAM
4.1 LCD Module Block Diagram:
TCON with
LVDS receiver
www.panelook.com
X-driver IC
Liquid Crystal Panel
Connector CN1
DC/DC
Converter
Gamma
Reference
Voltage
Generator
1024 pixels
1280
Y-dr iver IC
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 12 / 26
Document No. DC130-004301 Revision 1.0
4.2 Back Light Unit
www.panelook.com
2 Cold1
1 Hot 1
CN2
4.3 Pixel Format
1,1
1,2
(odd)
(even)
2,1
(odd)
1024
,1
1,3
(odd)
1,4
(even)
LCD Display Area
1
Pixel
R
G
R
R
B
1,
1280
1024
1280
CN3
1 Hot 2
2 Cold 2
1024 Lines
1280 Pixels
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 13 / 26
Document No. DC130-004301 Revision 1.0
4.4 Relationship Between Displayed Color and Input
MSB LSB MSB LSB MSB LSB Gray scale
Display
Black LLLLLLLLLLLLLLLLLLLLLLLL -
Blue LLLLLLLLLLLLLLLLHHHHHHHH -
Green L L L L LLLLHHHHHHHHLLLLLLLL Basic
color
Gray scale
of Red
Gray scale
of Green
Gray scale
of Blue
Gray scale
of White &
Black
Light BlueLLLLLLLLHHHHHHHHHHHHHHHH -
Red HHHHHHHHL L L L L L L L L L L L L L L L Purple HHHHHHHHL L L L L L L L HHHHHHHH Yellow HHHHHHHHHHHHHHHH L L L L L L L L -
White HHHHHHHHHHHHHHHHHHHHHHHH Black LLLLLLLLLLLLLLLLLLLLLLLL L0
Dark LLLLLLHLLLLLLLLLLLLLLLLL L2
Light H H H H H H L H L L L L L L L L L L L L L L L L L253
Red HHHHHHHHL L L L L L L L L L L L L L L L Red L255
Black LLLLLLLLLLLLLLLLLLLLLLLL L0
Dark LLLLLLLLLLLLLLHLLLLLLLLL L2
Light LLLLLLLLHHHHHHLHLLLLLLLL L253
Green L L L L LLLLHHHHHHHHLLLLLLLLGreen L255
Black LLLLLLLLLLLLLLLLLLLLLLLL L0
Dark LLLLLLLLLLLLLLLLLLLLLLHL L2
Light LLLLLLLLLLLLLLLLHHHHHHLH L253
Blue LLLLLLLLLLLLLLLLHHHHHHHHBlue L255
Black LLLLLLLLLLLLLLLLLLLLLLLL L0
Dark LLLLLLHLLLLLLLHLLLLLLLHL L2
Light H H H H H H L H H H H H H H L H H H H H H H L H L253
White HHHHHHHHHHHHHHHHHHHHHHHHWhite L255
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
LLLLLLLHLLLLLLLLLLLLLLLL L1
ʅǽ ǽ ǽ
ʆ
ʅǽ ǽ ǽ
ʆ
ʅǽ ǽ ǽ
ʆ
ʅǽ ǽ ǽ
ʆ
H H H H H H L L L L L L L L L L L L L L L L L L L252
H H H H H H H L L L L L L L L L L L L L L L L L L254
LLLLLLLLLLLLLLLHLLLLLLLL L1
LLLLLLLLHH HHHHLLLLLLLLLL L252
LLLLLLLLHHHHHHHLLLLLLLLL L254
LLLLLLLLLLLLLLLLLLLLLLLH L1
LLLLLLLLLLLLLLLLHH HHHHLL L252
LLLLLLLLLLLLLLLLHHHHHHHL L254
LLLLLLLHLLLLLLLHLLLLLLLH L1
H H H H H H L L H H H H H H L L H H H H H H L L L252
H H H H H H H L H H H H H H H L H H H H H H H L L254
www.panelook.com
Level
L3ǾL251
L3ǾL251
L3ǾL251
L3ǾL251
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 14 / 26
Document No. DC130-004301 Revision 1.0
5.0 I/O CONNECTION PIN ASSIGNMENT
5.1 Interface Connector (30-pins, HRS MDF76URW-30S-1H or equivalent)
Pin No. Signal Description
1 RinO0- Receiver Signal (-)
2 RinO0+ Receiver Signal (+)
3 RinO1- Receiver Signal (-)
4 RinO1+ Receiver Signal (+)
5 RinO2- Receiver Signal (-)
6 RinO2+ Receiver Signal (+)
7 VSS Ground
8 RinOC- Clock Signal (-)
9 RinOC+ Clock Signal (+)
10 RinO3- Receiver Signal (-)
11 RinO3+ Receiver Signal (+)
12 RinE0- Receiver Signal (-)
13 RinE0+ Receiver Signal (+)
14 VSS Ground
15 RinE1- Receiver Signal (-)
16 RinE1+ Receiver Signal (+)
17 VSS Ground
18 RinE2- Receiver Signal (-)
19 RinE2+ Receiver Signal (+)
20 RinEC- Clock Signal (-)
21 RinEC+ Clock Signal (+)
22 RinE3- Receiver Signal (-)
23 RinE3+ Receiver Signal (+)
24 VSS Ground
25 VSS Ground
26 NC NC
27 VSS Ground
28 VDD+5V Power Supply, 5V (Typical)
29 VDD+5V Power Supply, 5V (Typical)
30 VDD+5V Power Supply, 5V (Typical)
www.panelook.com
5.2 Back Light Unit (CCFL) Connectors:
CN2, 3: CCFL Power Source (Yeonho 35001HS-02 or equivalent)
Pin No. Symbol Color Function
1 Hot1 Pink CCFL power supply (High voltage)
2 Cold1 White Ground
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
D
V
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 15 / 26
Document No. DC130-004301 Revision 1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module:
Item Symbol Min. Typ. Max. Unit Note
Voltage of power supply VDD 4.5 5.0 5.5 V
Current of power supply I
Vsync frequency fV 50 60 76 Hz (2)
Hsync frequency fH 53.3 64 80 KHz
Frequency f
Input rush current I
www.panelook.com
DD0
50 54 67.5 MHz
DCLK
-- -- 3.0 A (3)
RUSH
650 750 850
mA (1)
Note (1) VDD =5.0V, Black pattern (L0)
Note (2) When fv is too low, a flicker may be occurred on the display.
Note (3) Input Rush Current condition
5
0.9VD
GND
0.1VDD
500us~10ms
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 16 / 26
Document No. DC130-004301 Revision 1.0
6.2 Back-Light Unit
The back-light system is an edge-lighting type with 2 CCFL
The characteristics of the lamp are shown in the following tables.
Item Symbol Min. Typ. Max. Unit Note
Lamp current IL 3.0 7.5 8.0 mA(rms) (1)
Lamp voltage VL 594 660 726 V(rms) IL=7.5mA
Frequency fL 40 50 80 KHz (2)
Operating Lifetime Hr 40,000 -- -- Hour 7.5mA(3)
Startup voltage Vs
www.panelook.com
(Cold Cathode Fluorescent Lamp)
1400 at 25oC
-- -- V(rms)
1650
at 0
.
o
C
INVERTER
(TBD)
LCD MODULE
1
2
1
2
A
A
Note (1)
Lamp current is measured with current meter for high frequency as shown below. Specified
values are for a single lamp. To exceed 7.5 mA, life time accelerate drop down and if to
exceed 9.0 mA has safety problem. If current lower than 3.5 mA, CCFL would be unstable or
damaged.
Note (2)
Lamp frequency may produce interference with horizontal synchronous frequency and this
may cause ripple noise on the display. Therefore lamp frequency shall be kept away from the
horizontal synchronous frequency and its harmonics as far as possible in order to avoid
interference.
Note (3)
Lamp life time (Hr) can be defined as the time in which it continues to operate under the
condition : Ta=25±3
o
C, Typical IL value indicated in the above table and fL=48 kHz until the
brightness becomes less than 50%
Note (4)
CCFL inverter should be able to provide a voltage over specified value (Vs) in the above
table. Lamp units need at least Vs value shown above to ignition.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 17 / 26
Document No. DC130-004301 Revision 1.0
Note (5)
The voltage over specified value (Vs) should be applied to the lamp more than 1 second
after startup. Otherwise, the lamp may not be turned on. The used lamp current is the lamp
typical current.
Note (6)
The output voltage waveform and current waveform of the inverter must be symmetrical
(Unsymmetrical ratio is less than 10%). Please do not use the inverter which has
unsymmetrical voltage and current waveform, and spike waveform. The inverter design
which can provide the best optical performance, power efficiency, and lamp life should under
the following conditions.
a. The asymmetry rate of the inverter waveform should be less than 10%.
b. The distortion tae of the waveform should be within
c. The inverter output waveform should be better similar to the ideal sine wave.
www.panelook.com
ɥ
2±10%.
Ip
Asymmetry rate = |I
Distortion rate = I
p
p-I-p
| / I
(or I-p) / I
rms
rms
I-p
x 100%
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 18 / 26
Document No. DC130-004301 Revision 1.0
6.3 Switching Characteristics for LVDS Receiver
Item Symbol Min. Typ. Max. Unit Conditions
Differential Input High Threshold Vth
Differential Input Low Threshold Vtl -100
Input Current I
Differential input Voltage |VID|0.1
Common Mode Voltage Offset V
Clock Frequency fc 50 54 67.5 MHz
www.panelook.com
ЁЁ
IN
CM
-10
1.15
+100 mV
ЁЁ
Ё
Ё
Ё
+10 uA
0.6 V
1.35 V
mV
V
CMLVDS
=2.4V/0V,
V
IN
V
DD
=1.25V
=3.6V
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 19 / 26
Document No. DC130-004301 Revision 1.0
6.4 Interface Timing ( DE mode)
Item Symbol Min. Typ. Max. Unit
Frame Rate -- 50 60 76 Hz
Frame Period t1 1029 1066 1150 line
Vertical Display Time t2 1024 1024 1024 line
Vertical Blanking Time t3 5 42 126 line
1 Line Scanning Time t4 720 844 875 clock
Horizontal Display Time t5 640 640 640 clock
Horizontal Blanking Time t6 80 204 235 clock
Clock Rate t7 50 54 67.5 MHz
Timing Diagram of Interface Signal (DE mode)
www.panelook.com
ˡ˖˟˞
˗˘
˥ʿ˚ʿ˕ˮ˃ˍˊ˰
ˡ˖˟˞
˗˘
˥ʿ˚ʿ˕ˮ˃ˍˊ˰
ˇ
ˇ
ˇˇ
˫ʿ˄
˫ʿ˄ ˫ʿ˅
˫ʿ˄˫ʿ˄
ˊ
ˊ
ˊˊ
˄˅ˆ
ˇ
˫ʿ˅ ˫ʿˆ
˫ʿˆ ˫ʿˇ
˫ʿ˅˫ʿ˅
˫ʿˆ˫ʿˆ
ˈ
ˉ
˄
˄
˄˄
˅
˅ ˆ
˅˅
˫ʿ
˫ʿ
˫ʿ
˫ʿ
˫ʿ
˄˃˅ˆ
˄˃˅ˆ
˄˃˅ˆ˄˃˅ˆ
˄˅ˊˆ
˄˅ˊˇ
˫ʿ
˫ʿ˫ʿ
˫ʿ˫ʿ
˄˃˅ˇ
˄˃˅ˇ
˄˃˅ˇ˄˃˅ˇ
˄˅ˊˈ
˄˅ˊˊ
˄˅ˊˉ
˄˅ˊˋ
˄˅ˉˌ
˄˅ˊ˃
˄˃˅˅
˄˃˅˅
˄˃˅˅˄˃˅˅
˫ʿ˫ʿ
˄˅ˊ˄
˄˅ˊ˅
˫ʿˇ ˫ʿˬ
˫ʿˇ˫ʿˇ
ˈ
ˈ ˉ
ˈˈ
ˊ
ˌ˄˃˄˄
ˋ
˄˅
˫ʿˬ
˫ʿˬ˫ʿˬ
ˇ
ˇ
ˇˇ
˄˅ˊˌ
˄˅ˋ˃
ˆ
ˆˆ
ˉ
ˉˉ
˫ʿ˄
˫ʿ˄ ˫ʿ˅
˫ʿ˅
˫ʿ˄˫ʿ˄
˫ʿ˅˫ʿ˅
˄˅ˆˇˈ
ˉ
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 20 / 26
Document No. DC130-004301 Revision 1.0
www.panelook.com
6.5 Power On / Off Sequence
Power On
Power Supply
0.9V
0.1V
0V
DD
TP1
TP2
Signal
0.6V 0.6V
0V
Backlight
(Recommended)
TP5
50%
ǺǺǺǺ
TP6
50%
Power Off
0.9V
TP3
0.1V
DD
TP4
0.1V
DD
Item Min. Typ. Max. Unit Remark
TP1 0.5 -- 10 msec
TP2 0 -- 50 msec
TP3 0 -- 50 msec
TP4 500 -- -- msec
TP5 200 -- -- msec
TP6 200 -- -- msec
NoteǺ(1) The supply voltage of the external system for the module input should be the same as the
definition of V
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on
before the LCD operation or the LCD truns off before the back-light turns off, the display
may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or keep a high
impedance.
(4) TP4 should be measured after the module has been fully discharged between power off
and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
DD
.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 21 / 26
Document No. DC130-004301 Revision 1.0
7.0 OUTLINE DIMENSION
7.1 Front View:
www.panelook.com
˕
˕
ଳ૿ီቹ˕ˀ˕
ʳʳˆˍ˄ᜍ࣋ˍ
˨
ଳ૿ီቹ˔ˀ˔
ʳʳˆˍ˄ᜍ࣋ˍ
˗
˔
˔
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 22 / 26
Document No. DC130-004301 Revision 1.0
7.2 Back View:
www.panelook.com
˄ˁ˕˴˶˾˿˼˺˻ˍʳˇʳ˖˖˙˟
˅ˁʳ˜˂˙ʳ˖˸˶ʳ˦˸˶˼˹˼˶˴˼ʳʻ˖ˡ˄ʼˍ
ʳʳʳʳ˙˜ˀ˫˕ˆ˃˦˦˥˟ˀ˛˙˄ˉʳʳ˘˼˴˿˸
ˆˁʳ˟˴ʳ˖˸˶ʳʻ˖ˡ˅˖ˡˈʼʳ˂ʳ˪˼˸ʳ˦˸˶˼˹˼˶˴˼ˍ
ʳʳʳʳˬ˸ˀ˛ʳˆˈ˃˃˄˛˦ˀ˃˅˟ʳʳ˘˼˴˿˸ʳ˂ʳ˅ˣ˼ʳʳ˟˄ˊ˃
ˇˁʳ˨˸ʳˠ˼˺ʳ˧˸ʳ˦˸˶ˍʳˆʳ˞˺˹ˀ˶ʳˠ˴ˁ
ˈˁʳ˨˸˶˼˹˼˶˸˷ʳ˧˿˸˴˶˸ʳ˼ʳ˃ˁˈˁ
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 23 / 26
Document No. DC130-004301 Revision 1.0
8.0 LOT MARK
8.1 Lot Mark
www.panelook.com
˞˟ˠˡˢˣˤ˥˦
10 11 12 13 14 15
code 1,2,3,4,5,6: HannStar internal flow control code.
code 7: production location.
code 8: production year.
code 9: production month.
code 10,11,12,13,14,15: serial number.
Note (1) Production Year: Code 8 is defined by the last number of the year. For example:
Year 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
Mark 1 2 3 4 5 6 7 8 9 0
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
8.2 Location of Lot Mark
(1) The label is attached to the backside of the LCD module.
(2) This is subject to change without prior notice.
HSD190MEN4
-A
Rev:
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
GP-HF
Lot mark
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 24 / 26
Document No. DC130-004301 Revision 1.0
9.0 PACKAGE SPECIFICATION
9.1 Packing form
(1) package quantity in one carton: 8 pieces.
www.panelook.com
(2) carton size: 544 mm
(3) for domestic transportation only.
Ø
302 mmØ446H mm.
9.2 Packing assembly drawings
ˠ˄ˌ˃ˇ
ˋˣ˖˦
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 25 / 26
Document No. DC130-004301 Revision 1.0
10.0 GENERAL PRECAUTION
10.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation
control systems, military systems and any other application where performance failure
could be life-threatening or otherwise catastrophic.
10.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD
module, and may cause scratches or dust on the display. HannStar does not warrant the
module, if customers disassemble or modify the module.
10.3 Breakage of LCD Panel
10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid
crystal, and do not contact liquid crystal with skin.
10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is
broken.
10.4 Electric Shock
10.4.1 Disconnect power supply before handling LCD module.
10.4.2 Do not pull or fold the CCFL cable.
10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s connector
or cables in order to prevent electric shock.
10.5 Absolute Maximum Ratings and Power Protection Circuit
10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental
temperature, etc., otherwise LCD module may be damaged.
10.5.2 Please do not leave LCD module in the environment of high humidity and high
temperature for a long time.
10.5.3 It’s recommended employing protection circuit for power supply.
10.6 Operation
10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
Use fingerstalls of soft gloves in order to keep clean display quality, when persons
handle the LCD module for incoming inspection or assembly.
10.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other soft
material.
10.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color
fading.
11.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a little
petroleum benzene or other adequate solvent.
www.panelook.com
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190MEN4 Standard Specification Page No. 26 / 26
Document No. DC130-004301 Revision 1.0
10.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
10.8 Static Electricity
10.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
10.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is
very weak to electrostatic discharge. Please be careful with electrostatic
discharge.
10.8.3 Persons who handle the module should be grounded through adequate methods.
10.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
10.10 Disposal
When disposing LCD module, obey the local environmental regulations.
www.panelook.com
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...