Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
To : ౙ
Date : June. 25
th,
2008
www.panelook.com
Page No. 1 / 29
HannStar Product Information
Model : HSD190MEN3
-A02
Note :
1. Please contact HannStar Display Corp. before designing your product based on this module specification.
2. The information contained herein is presented merely to indicate the characteristics and performance of
our products. No responsibility is assumed by HannStar for any intellectual property claims or other
problems that
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
may result from application based on the module described herein.
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
Rev. Date Sub-Model Description of change
1.0
June. 25
th,
2008
www.panelook.com
Page No. 2 / 29
Record of Revisions
A02 HSD190MEN3-A02 Product Information was first
issued.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
1.0 General Descriptions ……………………………….….. p.4
2.0 Absolute Maximum Ratings ……………………………. p.6
3.0 Optical Characteristics …………………………………. p.8
4.0 Block Diagram ………………………………………….. p.12
www.panelook.com
Contents
Page No. 3 / 29
5.0 I/O Connection Pin Assignment ………………………. p.15
6.0 Electrical Characteristics ………………….…………. p.16
7.0 Outline Dimension …………………………….……….. p.22
8.0 Lot Mark …………………………………………………. p.24
9.0 Package Specification ……………………………...…... p.25
10.0 General Precaution ……………………………………….. p.26
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
1.0 GENERAL DESCRIPTIONS
1.1 Introduction
HannStar Display model HSD190MEN3-A02 is a color active matrix thin film
transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a
switching device. This model is composed of a TFT LCD panel, the voltage
reference, common voltage, DC-DC converter, column, and row driver circuit. This
TFT LCD has a 19-inch diagonally measured active display area with SXGA
resolution (1024 vertical by 1280 horizontal pixel array) .
1.2 Features
Ŷ 19”SXGA TFT LCD Panel
Ŷ 4 CCFLs Backlight System
Ŷ Supported SXGA (V:1024 lines, H:1280 pixels) Resolution
Ŷ Supported to 75Hz Refresh Rate
Ŷ LCD Timing Controller
Ŷ RoHS Compliance
Ŷ VESA Compatible
1.3 Applications
Ŷ Desktop Monitors
Ŷ Display terminals for AV applications
Ŷ Monitors for industrial applications
1.4 General information
Item Specification Unit
Outline dimension 396 * 324 * 16.5(Typ) mm
Display area 376.32 (H) x301.056 (V) (19.0” diagonal) mm
Number of Pixel 1280(H) x 1024(V) Pixels
Pixel pitch 0.294(H) x 0.294(V) mm
Pixel arrangement RGB Vertical Stripe
Display color 16.7M (6-bits+Hi FRC)
Color temperature 6500K
Display mode Normally white
Surface treatment Antiglare, Hard-Coating (3H)
Weight 2250 g
Back-light 4-CCFLs, Top & bottom edge side
Input signal 2-ch LVDS
Power consumption
www.panelook.com
Page No. 4 / 29
System 3.5(Typ.)
B/L 19.8(Typ.)
W
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
1.5 Mechanical Information
Item Min. Typ. Max. Unit
Horizontal(H) 395.5 396.0 396.5 mm
www.panelook.com
Page No. 5 / 29
Module Size
Vertical(V) 323.5 324.0 324.5 mm
Depth(D) 16.5 mm
Weight (without inverter) -- 2250 -- g
Torque of customer screw hole -- -- 3.0 Kgf*Cm
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item Symbol Min. Max. Unit Note
Storage temperature T
Operating temperature T
Vibration (non-operating) V
Shock (non-operating) S
Storage humidity H
Operating humidity HOP 10 80 %RH (4)
Low pressure (operating) P
Low pressure (non-operating) P
www.panelook.com
-20 60 oC
STG
0 50 oC (1)
OPR
-- 1.5 G (2)
NOP
-- 70 G (3)
NOP
10 90 %RH (3)
STG
697 -- HPa (5)
LOP
116 -- HPa (6)
LNOP
Page No. 6 / 29
Note (1)Storage /Operating temperature
Humidity (%)
100
90
80
Operating Range
0
Temperature (
20 40 60
o
C)
50
Storage Range
-20 -40
60
40
20
10
0
(2) 5-500-5Hz sine wave, X, Y, Z each directions, 30 min/cycle.
(3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test,
It is necessary to fill the silicon rubber between the shock jig as buffer.
(4) Max wet bulb temp. =39
o
C
(5) 2 hrs. (10000 feet)
(6) 24hrs. (50000 feet)
65
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
2.2 Electrical Absolute Rating:
2.2.1 TFT LCD Module:
Item Symbol Min. Max. Unit. Note
Power supply Voltage VDD -0.3 5.5 V(DC) (1)(2)
2.2.2 Back Light Unit:
Item Symbol Min. Max. Unit Note
Lamp current IL 3.0 8.0 mA (1)(2)(3)
www.panelook.com
Page No. 7 / 29
Lamp frequency fL 40 80 KHz (1)(2)(3)
Note (1)Permanent damage may occur to the LCD module if beyond this
specification. Functional operation should be restricted to the conditions
described under Normal Operating Conditions.
(2)To exceed 7.5mA, life time accelerate drop down and if to exceed 8.0 mA
has safety problem. If current lower than 3.0 mA, CCFL would be unstable
or damaged.
(3) Within Ta=25±2°C
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR 700 1000 -- (1)(2)
Response
time
Rising -- 1.2 2.4
Falling
www.panelook.com
TR +TF
Page No. 8 / 29
msec (1)(3)
-- 3.8 7.6
White luminance
(center of screen)
Red
Gree
Color
n
chromaticity
(CIE1931)
Blue
Whit
e
Hor.
Viewing angle
Ver.
Hor.
Viewing angle
Ver.
Brightness uniformity B
250 300 -- cd/m2
Y
L
Rx
Ry
Gx
Gy
Bx
By
Wx
Wy
o
φ=0
o
Ә=0
Normal
viewing
angle
-0.03
0.641
0.337
0.304
0.620
0.141
0.073
0.313
0.329
+0.03
(IL=7.5mA)
(1)(4)
ӘL 75 85 --
(1)(4)
Ә
75
R
CR>10
ӘH 70
Ә
L
70
85
80
80
--
--
--
ӘL 75 85 -Ә
75 85 --
R
CR>5
ӘH 75 85 -Ә
UNI
L
Ә=0
φ=0
o
o
75 85 --
75 -- -- % (6)
3.2 Measuring Condition
Ŷ Measuring surrounding: dark room
Ŷ Lamp current IBL: (7.5)mA, Inverter: TBD332NR
Ŷ V
Ŷ Surrounding temperature: 25±2
=5.0V, fV=60Hz, f
DD1
DCLK
=54MHz
o
C
Ŷ 30min. Warm-up time.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
3.3 Measuring Equipment
Ŷ FPM520 of Westar Display technologies, INC., which utilized SR-3 for
Chromaticity and BM-5A for other optical characteristics.
Ŷ Measuring spot size: 20~21mm
Note (1) Definition of Viewing Angle:
ӘL
ӘL=90o
Note (2) Definition of Contrast Ratio(CR) :
measured at the center point of panel
Luminance with all pixels white (L255)
CR =
Luminance with all pixels black (L0)
www.panelook.com
ӥH
ӥ
L
6’ o’clock
o
=90
ӥ
L
12’ o’clock
o
=90
ӥ
H
ӘR
Page No. 9 / 29
ӘR=90o
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
Note (3) Definition of Response Time: Sum of T
white(TFT OFF) black (TFT ON) white(TFT OFF)
100%
90%
Optical
response
10%
0%
Note (4) Optical characteristic measurement setup
LCD Panel
120cm
www.panelook.com
T
R
Field = 1
and TF
R
o
Page No. 10 / 29
T
F
Photo-detector (BM-5A)
time
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
Note (5) Definition of Center Luminance of White (center)
Center Luminance= Y1
1/10 H
1/10V
1/10V
Note (6) Definition of brightness uniformity
Luminance uniformity = x 100%
www.panelook.com
1/2H
Y1
(Min Luminance of 9 points)
(Max Luminance of 9 points)
Page No. 11 / 29
1/10H
1/2V
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
4.0 BLOCK DIAGRAM
4.1 LCD Module Block Diagram:
Connector CN1
Converter
TCON with
LVDS recei ve r
DC/DC
www.panelook.com
Gamma
Reference
Voltage
Generator
Y-dr ive r IC
Page No. 12 / 29
X-driver IC
Liquid Crystal Panel
1280
1024 pixels
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
4.2 Back Light Unit
4.3 Pixel Format
www.panelook.com
Page No. 13 / 29
1 Hot 1
2 Cold 1
1 Hot 2
2 Cold 2
Back light lamp
CN2, 3, 4, 5.
1 Hot 1
2 Cold 1
1 Hot 2
2 Cold 2
1,1
1,2
1,3
(odd)
2,1
(odd)
(even)
(odd)
1,4
(even)
LCD Display Area
1280
1,
1024
,1
1
Pixel
R
G
R
R
B
1024
1280
1024 Lines
1280 Pixels
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
HSD190MEN3 Product Information for
Document No. Revision 1.0
4.4 Relationship Between Displayed Color and Input
MSB LSB MSB LSB MSB LSB Gray scale
Display
Black L L L L L L L L L L L L L L L L L L L L L L L L -
Blue L L L L L L L L L L L L L L L L H H H H H H H H -
Green L L L L L L L L H H H H H H H H L L L L L L L L Basic
color
Gray scale
of Red
Gray scale
of Green
Gray scale
of Blue
Gray scale
of White &
Black
Light Blue L L L L L L L L H H H H H H H H H H H H H H H H -
Red H H H H H H H H L L L L L L L L L L L L L L L L Purple H H H H H H H H L L L L L L L L H H H H H H H H Yellow H H H H H H H H H H H H H H H H L L L L L L L L -
White H H H H H H H H H H H H H H H H H H H H H H H H Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L H L L L L L L L L L L L L L L L L L L2
Light H H H H H H L H L L L L L L L L L L L L L L L L L253
Red H H H H H H H H L L L L L L L L L L L L L L L L Red L255
Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L L L L L L L L L H L L L L L L L L L L2
Light L L L L L L L L H H H H H H L H L L L L L L L L L253
Green L L L L L L L L H H H H H H H H L L L L L L L L Green L255
Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L L L L L L L L L L L L L L L L L H L L2
Light L L L L L L L L L L L L L L L L H H H H H H L H L253
Blue L L L L L L L L L L L L L L L L H H H H H H H H Blue L255
Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L H L L L L L L L H L L L L L L L H L L2
Light H H H H H H L H H H H H H H L H H H H H H H L H L253
White H H H H H H H H H H H H H H H H H H H H H H H H White L255
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5B4B3 B2 B1 B
L L L L L L L H L L L L L L L L L L L L L L L L L1
L3 L251
H H H H H H L L L L L L L L L L L L L L L L L L L252
H H H H H H H L L L L L L L L L L L L L L L L L L254
L L L L L L L L L L L L L L L H L L L L L L L L L1
L3 L251
L L L L L L L L H H H H H H L L L L L L L L L L L252
L L L L L L L L H H H H H H H L L L L L L L L L L254
L L L L L L L L L L L L L L L L L L L L L L L H L1
L3 L251
L L L L L L L L L L L L L L L L H H H H H H L L L252
L L L L L L L L L L L L L L L L H H H H H H H L L254
L L L L L L L H L L L L L L L H L L L L L L L H L1
L3 L251
H H H H H H L L H H H H H H L L H H H H H H L L L252
H H H H H H H L H H H H H H H L H H H H H H H L L254
www.panelook.com
Page No. 14 / 29
Level
0
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
5.0 I/O CONNECTION PIN ASSIGNMENT
5.1 Interface Connector (30-pins, HRS MDF76URW-30S-1H or equivalent)
Pin No. Signal Description
1 RinO0- Receiver Signal (-)
2 RinO0+ Receiver Signal (+)
3 RinO1- Receiver Signal (-)
4 RinO1+ Receiver Signal (+)
5 RinO2- Receiver Signal (-)
6 RinO2+ Receiver Signal (+)
7 VSS Ground
8 RinOC- Clock Signal (-)
9 RinOC+ Clock Signal (+)
10 RinO3- Receiver Signal (-)
11 RinO3+ Receiver Signal (+)
12 RinE0- Receiver Signal (-)
13 RinE0+ Receiver Signal (+)
14 VSS Ground
15 RinE1- Receiver Signal (-)
16 RinE1+ Receiver Signal (+)
17 VSS Ground
18 RinE2- Receiver Signal (-)
19 RinE2+ Receiver Signal (+)
20 RinEC- Clock Signal (-)
21 RinEC+ Clock Signal (+)
22 RinE3- Receiver Signal (-)
23 RinE3+ Receiver Signal (+)
24 VSS Ground
25 VSS Ground
26 NC NC
27 VSS Ground
28 VDD+5V Power Supply, 5V (Typical)
29 VDD+5V Power Supply, 5V (Typical)
30 VDD+5V Power Supply, 5V (Typical)
5.2 Back Light Unit (CCFL) Connectors:
www.panelook.com
Page No. 15 / 29
CN2, 3, 4, 5: CCFL Power Source (Yeonho 35001HS-02 or equivalent)
Pin No. Symbol Color Function
1 Hot1 Pink CCFL power supply (High voltage)
2 Cold1 White Ground
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
r
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module:
Item Symbol Min. Typ. Max. Unit Note
Voltage of power supply VDD 4.5 5.0 5.5 V
White I
Current of powe
supply
Vsync frequency fV 56 60 76 Hz (2)
Hsync frequency fH 64 64 80 KHz
Frequency f
Input rush current I
Note (1)
(a)White:
V-Color I
Mosaic I
www.panelook.com
380 480 580 mA (1)
DD0
DD1
DD2
DCLK
RUSH
500 600 700
600 1010 1210
50 54 67.5 MHz
-- -- 3.0 A (3)
Page No. 16 / 29
mA (1)
mA (1)
(b).V-Color :
Yellow
White
Purple
Red
Cyan
Green
Blue
Black
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
(c)Mosaic : 2 Dot checker image
www.panelook.com
Page No. 17 / 29
L0
Grey scale :L0~L255
L0 :Luminance with all pixels black.
L255: Luminance with all pixels white.
Note (2) When fv is too low, a flicker may be occurred on the display.
Note (3) Input Rush Current measurement condition
L31
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
V
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
www.panelook.com
Page No. 18 / 29
0.9VDD
5
GND
0.1VDD
500us~10ms
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
6.2 Back-Light Unit
The back-light system is an edge-lighting type with 4 CCFL (Cold Cathode
Fluorescent Lamp).The characteristics of the lamp are shown in the following tables.
Item Symbol Min. Typ. Max. Unit Note
Lamp current IL 3.0 7.5 8.0 mA(rms) (1)
Lamp voltage VL 594 660 726 V(rms) IL=7.5mA
Frequency fL 40 50 80 KHz (2)
Operating Lifetime Hr 40,000 -- -- Hour 7.5mA(3)
Startup voltage Vs
LCD MODULE
Note (1)
Lamp current is measured with current meter for high frequency as shown below.
Specified values are for a single lamp. To exceed 7.5 mA, life time accelerate drop
down and if to exceed 9.0 mA has safety problem. If current lower than 3.5 mA,
CCFL would be unstable or damaged.
Note (2)
Lamp frequency may produce interference with horizontal synchronous frequency
and this may cause ripple noise on the display. Therefore lamp frequency shall be
kept away from the horizontal synchronous frequency and its harmonics as far as
possible in order to avoid interference.
Note (3)
Lamp life time (Hr) can be defined as the time in which it continues to operate under
the condition : Ta=25±3
kHz until the brightness becomes less than 50%
www.panelook.com
Page No. 19 / 29
1400 at 25oC
1650
-- -- V(rms)
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
o
C, Typical IL value indicated in the above table and fL=48
A
A
A
A
INVERTER
(TBD332NR)
at 0
o
C
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
Note (4)
CCFL inverter should be able to provide a voltage over specified value (Vs) in the
above table. Lamp units need at least Vs value shown above to ignition.
Note (5)
The voltage over specified value (Vs) should be applied to the lamp more than 1
second after startup. Otherwise, the lamp may not be turned on. The used lamp
current is the lamp typical current.
Note (6)
The output voltage waveform and current waveform of the inverter must be
symmetrical (Unsymmetrical ratio is less than 10%). Please do not use the inverter
which has unsymmetrical voltage and current waveform, and spike waveform. The
inverter design which can provide the best optical performance, power efficiency, and
lamp life should under the following conditions.
a. The asymmetry rate of the inverter waveform should be less than 10%.
b. The distortion tae of the waveform should be within Ѕ2±10%.
c. The inverter output waveform should be better similar to the ideal sine wave.
Ip
Asymmetry rate = |Ip-I-p| / Irms x 100%
Distortion rate = Ip (or I-p) / Irms
www.panelook.com
I-p
Page No. 20 / 29
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
www.panelook.com
Page No. 21 / 29
6.3 Switching Characteristics for LVDS Receiver
Item Symbol Min. Typ. Max. Unit Conditions
Differential Input High Threshold Vth
Differential Input Low Threshold Vtl -100
Input Current I
Differential input Voltage |VID| 0.1
Common Mode Voltage Offset V
Clock Frequency fc 50 54 67.5 MHz
IN
CM
-10
1.15
+100 mV
CMLVDS
=2.4V/0V,
V
IN
=3.6V
V
DD
=1.25V
mV
V
+10 uA
0.6 V
1.35 V
6.4 Interface Timing ( DE mode)
Item Symbol Min. Typ. Max. Unit
Frame Rate -- 50 60 76 Hz
Frame Period t1 1029 1066 1150 line
Vertical Display Time t2 1024 1024 1024 line
Vertical Blanking Time t3 5 42 126 line
1 Line Scanning Time t4 720 844 875 clock
Horizontal Display Time t5 640 640 640 clock
Horizontal Blanking Time t6 80 204 235 clock
Clock Rate t7 50 54 67.5 MHz
Timing Diagram of Interface Signal (DE mode)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
www.panelook.com
Page No. 22 / 29
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
6.5 Power On / Off SequenceΚΚΚΚ
www.panelook.com
Page No. 23 / 29
Power On
Power Off
Power Supply
0.9V
DD
0.1V
DD
0.1VDD
TP4
0V
0V
0.1V
Signal
0.9VDD
DD
TP1
TP2
0.6V 0.6V
TP5
TP3
TP6
Backlight
(Recommended)
50%
50%
Item Min. Typ. Max. Unit Remark
TP1 0.5 -- 10 msec
TP2 0 -- 50 msec
TP3 0 -- 50 msec
TP4 500 -- -- msec
TP5 200 -- -- msec
TP6 200 -- -- msec
NoteΚ (1)The supply voltage of the external system for the module input should be the
same as the definition of V
DD
.
(2) Apply the lamp volatge within the LCD operation range. When the back-light
turns on before the LCD operation or the LCD truns off before the back-light turns
off, the display may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or
keep a high impedance.
(4) TP4 should be measured after the module has been fully discharged between
power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
7.0 OUTLINE DIMENSION
7.1 Front View: Date: 2007.1.11
www.panelook.com
Page No. 24 / 29
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
BM Assembly Tolerance
| A-A’ | 1 (mm)
www.panelook.com
Page No. 25 / 29
| B-B’ | 1 (mm)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
7.2 Back View: Date: 2007.1.11
www.panelook.com
Page No. 26 / 29
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
HSD190MEN3 Product Information for
Document No. Revision 1.0
8.0 LOT MARK
8.1
Lot Mark
www.panelook.com
Page No. 27 / 29
Ѿ ѿ Ҁ ҁ ҂ ҃ ҄ ҅ ҆
code 1,2,3,4,5,6: HannStar internal flow control code.
code 7: production location.
code 8: production year.
code 9: production month.
code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008
Mark 9 0 1 2 3 4 5 6 7 8
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
8.2 Location of Lot Mark
(1) The label is attached to the backside of the LCD module.
(2) This is subject to change without prior notice.
10 11 12 13 14 15
HSD190MEN3
-A02
RoHS
Rev:
Lot mark
CN1
Up
Center of Active Area
CN5CN4
CN3
CN2
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Down
RISK OF ELECTRIC SHOCK DISCONNECT
THE ELECTRIC POWER BEFORE SERVICING
HIGH VOLTAGE CAUTION
COLD CATHODE FLUORESCENT LAMP IN LCD PANEL CONTAINS
A SMALL AMOUNT OF MERCURY. PLEASE FOLLOW LOCAL
ORDINANCES OR REGULATIONS FOR DISPOSAL.
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
9.0 PACKAGE SPECIFICATION
9.1 Packing form
(1) package quantity in one carton: 8 pieces.
(2) carton size: 544²3 mmØ302²3 mmØ446
(3) for domestic transportation only.
9.2 Packing assembly drawings
www.panelook.com
H
²3 mm.
Page No. 28 / 29
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
10.0 GENERAL PREC AUTION
10.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation
control systems, military systems and any other application where performance
failure could be life-threatening or otherwise catastrophic.
10.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside
LCD module, and may cause scratches or dust on the display. HannStar does not
warrant the module, if customers disassemble or modify the module.
10.3 Breakage of LCD Panel
10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale
liquid crystal, and do not contact liquid crystal with skin.
10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol
and rinse thoroughly with water.
10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is
broken.
10.4 Electric Shock
10.4.1 Disconnect power supply before handling LCD module.
10.4.2 Do not pull or fold the CCFL cable.
10.4.3
Do not touch the parts inside LCD modules and the fluorescent lamp’s
connector or cables in order to prevent electric shock.
10.5 Absolute Maximum Ratings and Power Protection Circuit
10.5.1 Do not exceed the absolute maximum rating values, such as the supply
voltage variation, input voltage variation, variation in parts’ parameters,
environmental temperature, etc., otherwise LCD module may be damaged.
10.5.2 Please do not leave LCD module in the environment of high humidity and
high temperature for a long time.
10.5.3 It’s recommended employing protection circuit for power supply.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
www.panelook.com
Page No. 29 / 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190MEN3 Product Information for
10.6 Operation
10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil
lead.Use fingerstalls of soft gloves in order to keep clean display quality,
when persons handle the LCD module for incoming inspection or assembly.
10.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other
soft material.
10.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color
fading.
10.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a
little petroleum benzene or other adequate solvent.
10.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
10.8 Static Electricity
10.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
10.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel,
it is very weak to electrostatic discharge. Please be careful with electrostatic
discharge.
10.8.3
Persons who handle the module should be grounded through adequate
methods.
10.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight.
Otherwise, display characteristics may be changed.
10.10 Disposal
When disposing LCD module, obey the local environmental regulations.
www.panelook.com
Page No. 30 / 29
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...