1. Please contact Hannstar Display Corp. before designing your product based on this module specification.
2.The information contained herein is presented merely to indicate the characteristics and performance of
our products. No responsibility is assumed by Hannstar for any intellectual property claims or other
problems that may result from application based on the module described herein.
1The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
Rev. Date Sub-Model Description of change
1.0
Nov.02.2006
D30
www.panelook.com
Page No. 2 / 31
Record of Revisions
st
HSD190ME13-D30 Product Information was 1
issued.
2The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
1.0 General Descriptions ……………………………….… p.4
2.0 Absolute Maximum Ratings ………………………….. p.5
3.0 Optical Characteristics ……………………………….. p.7
4.0 Block Diagram ………………………………………… p.11
www.panelook.com
Page No. 3 / 31
Contents
5.0 I/O Connection Pin Assignment …………………….. p.14
6.0 Electrical Characteristics ………………….……….. p.15
7.0 Outline Dimension …………………………….……… p.21
8.0 Lot Mark ……………………………………………….. p.24
9.0 Package Specification ……………………………...… p.25
10.0 General Precaution …………………………………… p.26
3The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
1.0 GENERAL DESCRIPTIONS
1.1 Introduction
HannStar Display model HSD190ME13-D30 is a color active matrix thin film transistor
(TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device.
This model is composed of a TFT LCD panel, the voltage reference, common voltage,
DC-DC converter, column, and row driver circuit. This TFT LCD has a 19-inch diagonally
measured active display area with SXGA resolution (1024 vertical by 1280 horizontal pixel
array) .
Ŷ Desktop Monitors
Ŷ Display terminals for AV applications
Ŷ Monitors for industrial applications
1.4 General information
Item Specification Unit
Outline dimension 396*324 *17.5(Typ) mm
Display area 376.32 (H) x301.056 (V) (19.0” diagonal) mm
Number of Pixel 1280(H) x 1024(V) Pixels
Pixel pitch 0.294(H) x 0.294(V) mm
Pixel arrangement RGB Vertical Stripe
Display color 16.2M (6-bits+FRC)
Display mode Normally white
Surface treatment Antiglare, Hard-Coating(3H)
Weight 2600g(Typ.) g
Back-light 4-CCFLs, Top & bottom edge side
Input signal 2-ch LVDS
Power consumption
Optimum viewing direction 6 o’clock
www.panelook.com
Page No. 4 / 31
System 3.05
W
B/L 20
4The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
HSD190ME13- D Product Information (Tentative)
Document No. Revision 1.0
1.5 Mechanical Information
Item Min. Typ. Max. Unit
www.panelook.com
Page No. 5 / 31
Horizontal(H) 395.5 396.0 396.5 mm
Module Size
Vertical(V) 323.5 324.0 324.5 mm
Depth(D) 17.0 17.5 18.0 mm
Weight (without inverter) 2450 2600 2750 g
Torque of customer screw hole -- -- 3.0 Kgf*Cm
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item Symbol Min. Max. Unit Note
Storage temperature T
Operating temperature T
Vibration(non-operating) V
Shock(non-operating) S
Storage humidity H
Operating humidity HOP 10 80 %RH (4)
Low pressure(operating) P
Low pressure(non-operating) P
Note (1)Storage /Operating temperature
Storage Range
-20 -40
STG
OPR
NOP
NOP
STG
LOP
LNOP
Humidity (%)
100
90
80
60
40
20
10
0
0
Temperature (
-20 60 oC
0 50 oC (1)
-- 1.5 G (2)
-- 70 G (3)
10 90 %RH (3)
697 -- HPa (5)
116 -- HPa (6)
Operating Range
20 40 60
o
C)
50
65
5The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
(2) 5-500-5Hz sine wave, X,Y,Z each directions, 30 min/cycle.
(3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test,
It is necessary to fill the silicon rubber between the shock jig as buffer.
(4) Max wet bulb temp. =39
(5) 2 hrs. (10000 feet)
(6) 24hrs. (50000 feet)
2.2 Electrical Absolute Rating:
2.2.1 TFT LCD Module:
HSD190ME13- D Product Information (Tentative)
Item Symbol Min. Max.Unit. Note
www.panelook.com
o
C
Page No. 6 / 31
Power supply Voltage VDD -0.3 5.5 V(DC) (1)(2)
2.2.2 Back Light Unit:
Item Symbol Min. Max. Unit Note
Lamp current IL 3.0 9.0 mA (1)(2)(3)
Lamp frequency fL 40 80 KHz (1)(2)(3)
Note: (1) Permanent damage may occur to the LCD module if beyond this specification.
Functional operation should be restricted to the conditions described under
Normal Operating Conditions.
(2) To exceed 7.5mA, life time accelerate drop down and if to exceed 9.0 mA has
safety problem. If current lower than 3.0 mA, CCFL would be unstable or
damaged.
(3) Within Ta=25±2°C
6The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR 700 1000-- (1)(2)
Response time
Rising -- 1.5 3
Falling
TR +TF
www.panelook.com
Page No. 7 / 31
msec(1)(3)
-- 3.5 7
White luminance
(center of screen)
Red
Gree
Color
n
chromaticity
(CIE1931)
Blue
White
Hor.
Viewing angle
Ver.
Hor.
Viewing angle
Ver.
Brightness uniformity B
240 300 -- cd/m2
Y
L
=0o
Rx
Ry
Gx
Gy
Bx
By
Wx
Wy
70 80 --
L
70 80 --
R
70 80 --
H
L
-- 85 --
L
-- 85 --
R
-- 85 --
H
L
o
φ=0
Normal
viewing
angle
CR>10
CR>5
0.614 0.644 0.674
0.298 0.328 0.358
0.260 0.290 0.320
0.584 0.614 0.644
0.112 0.142 0.172
0.049 0.079 0.109
0.280 0.310 0.340
0.300 0.330 0.360
70 80 --
-- 85 --
(1)(4)
=0o
UNI
φ=0
o
75 -- -- % (6)
(1)(4)
(IL=7.5mA)
3.2 Measuring Condition
Ŷ Measuring surrounding : dark room
Ŷ Lamp current I
Ŷ V
=5.0V, fV=60Hz, f
DD1
Ŷ Surrounding temperature : 25±2
Ŷ 30min. Warm-up time.
7The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Ŷ MD-3000 of Otsuka Electric Corp., which utilized MCPD-7000 for Chromaticity
and BM-5A for other optical characteristics.
Ŷ Measuring spot size : 10~12mm
HSD190ME13- D Product Information (Tentative)
Note (1) Definition of Viewing Angle:
ӘL=90o
Note (2) Definition of Contrast Ratio(CR) :
measured at the center point of panel
Luminance with all pixels white (L255)
CR =
Luminance with all pixels black (L0)
ӘL
6’ o’clock
ӥ
www.panelook.com
ӥH
12’ o’clock
ӥ
ӘR
ӥ
L
o
=90
L
=90
H
Page No. 8 / 31
o
ӘR=90o
8The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
Note (3) Definition of Response Time: Sum of TR and TF
white(TFT OFF)black(TFT ON)white(TFT OFF)
100%
90%
Optical
response
10%
0%
Note (4) Optical characteristic measurement setup
Field=2 o
www.panelook.com
T
R
50cm
Page No. 9 / 31
T
F
Photo-detector (BM-5A)
LCD panel
time
9The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
Note (5) Definition of Center Luminance of White (center)
Center Luminance= Y1
HSD190ME13- D Product Information (Tentative)
1/10 H
1/10V
1/10V
Note (6) Definition of brightness uniformity
Luminance uniformity = x 100%
10The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
www.panelook.com
1/2H
Y1
(Min Luminance of 9 points)
(Max Luminance of 9 points)
Page No. 10 / 31
1/10H
1/2V
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
4.0 BLOCK DIAGRAM
4.1 LCD Module Block Diagram:
Connector CN1
Converter
TCON with
LVDS receiver
DC/DC
www.panelook.com
Gamma
Reference
Voltage
Generator
Page No. 11 / 31
X-driver IC
Liquid Crystal Panel
1280
1024 pixels
Y-dr iv e r I C
11The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
4.2 Back Light Unit
4.3 Pixel Format
www.panelook.com
Page No. 12 / 31
1 Hot 1
2 Cold 1
1 Hot 2
2 Cold 2
Back light lamp
CN2, 3, 4, 5.
1 Hot 1
2 Cold 1
1 Hot 2
2 Cold 2
1,1
1,2
1,3
(odd)
2,1
(odd)
(even)
(odd)
1,4
(even)
LCD Display Area
1280
1,
1024
,1
1
Pixel
R
G
R
R
B
1024
1280
1024 Lines
1280 Pixels
12The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
HSD190ME13- D Product Information (Tentative)
Document No. Revision 1.0
4.4 Relationship Between Displayed Color and Input
MSB LSB MSB LSB MSB LSB Gray scale
Display
Black L L L L L L L L L L L L L L L L L L L L L L L L -
Blue LLLLLLLLLLLLLLLLHHHHHHHH-
Green L L L L L L L L H H H H H H H H L L L L L L L L Basic
color
Gray scale
of Red
Gray scale
of Green
Gray scale
of Blue
Gray scale
of White &
Black
Light Blue L L L L L L L L H H H H H H H H H H H H H H H H -
Red H H H H H H H H L L L L L L L L L L L L L L L L Purple H H H H H H H H L L L L L L L L H H H H H H H H Yellow H H H H H H H H H H H H H H H H L L L L L L L L -
White H H H H H H H H H H H H H H H H H H H H H H H H Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L H L L L L L L L L L L L L L L L L L L2
Light H H H H H H L H L L L L L L L L L L L L L L L L L253
Red H H H H H H H H L L L L L L L L L L L L L L L L Red L255
Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L L L L L L L L L H L L L L L L L L L L2
Light L L L L L L L L H H H H H H L H L L L L L L L L L253
Green L L L L L L L L H H H H H H H H L L L L L L L L Green L255
Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L L L L L L L L L L L L L L L L L H L L2
Light L L L L L L L L L L L L L L L L H H H H H H L H L253
Blue L L L L L L L L L L L L L L L L H H H H H H H H Blue L255
Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L H L L L L L L L H L L L L L L L H L L2
Light H H H H H H L H H H H H H H L H H H H H H H L H L253
White H H H H H H H H H H H H H H H H H H H H H H H H White L255
13The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
L L L L L L L H L L L L L L L L L L L L L L L L L1
L3 L251
H H H H H H L L L L L L L L L L L L L L L L L L L252
H H H H H H H L L L L L L L L L L L L L L L L L L254
L L L L L L L L L L L L L L L H L L L L L L L L L1
L3 L251
L L L L L L L L H H H H H H L L L L L L L L L L L252
L L L L L L L L H H H H H H H L L L L L L L L L L254
L L L L L L L L L L L L L L L L L L L L L L L H L1
L3 L251
L L L L L L L L L L L L L L L L H H H H H H L L L252
L L L L L L L L L L L L L L L L H H H H H H H L L254
L L L L L L L H L L L L L L L H L L L L L L L H L1
L3 L251
H H H H H H L L H H H H H H L L H H H H H H L L L252
H H H H H H H L H H H H H H H L H H H H H H H L L254
www.panelook.com
Page No. 13 / 31
Level
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
5.0 I/O CONNECTION PIN ASSIGNMENT
5.1 Interface Connector (30-pins, StarConn: 093G30-B001A, or JAE: FI-X30SSL-HF or
equivalent)
Pin No. Signal Description
1 RinO0- Receiver Signal (-)
2 RinO0+ Receiver Signal (+)
3 RinO1- Receiver Signal (-)
4 RinO1+ Receiver Signal (+)
5 RinO2- Receiver Signal (-)
6 RinO2+ Receiver Signal (+)
7 VSS Ground
8 RinOC- Clock Signal (-)
9 RinOC+ Clock Signal (+)
10 RinO3- Receiver Signal (-)
11 RinO3+ Receiver Signal (+)
12 RinE0- Receiver Signal (-)
13 RinE0+ Receiver Signal (+)
14 VSS Ground
15 RinE1- Receiver Signal (-)
16 RinE1+ Receiver Signal (+)
17 VSS Ground
18 RinE2- Receiver Signal (-)
19 RinE2+ Receiver Signal (+)
20 RinEC- Clock Signal (-)
21 RinEC+ Clock Signal (+)
22 RinE3- Receiver Signal (-)
23 RinE3+ Receiver Signal (+)
24 VSS Ground
25 VSS Ground
26 NC NC
27 VSS Ground
28 VDD+5V Power Supply, 5V (Typical)
29 VDD+5V Power Supply, 5V (Typical)
30 VDD+5V Power Supply, 5V (Typical)
5.2 Back Light Unit (CCFL) Connectors:
CN2, 3, 4, 5: CCFL Power Source (Yeonho 35001H5-02 or equivalent)
www.panelook.com
Page No. 14 / 31
Pin No. Symbol Color Function
1 Hot1 Pink CCFL power supply (High voltage)
2 Cold1 White Ground
14The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module:
Item Symbol Min. Typ. Max. Unit Note
Voltage of power supply VDD 4.5 5.0 5.5 V
Current of power
supply
Vsync frequency fV 56 60 76 Hz (2)
Hsync frequency fH 64 64 80 KHz
Frequency f
Input rush current I
Note (1)
(a)White:
www.panelook.com
White I
V-Color I
Mosaic I
Page No. 15 / 31
DD0
DD1
DD2
50 54 67.5 MHz
DCLK
-- -- 3.0 A (3)
RUSH
430 530 630
510 610 710
660 760 860
mA (1)
mA (1)
mA (1)
(b).V-Color :
Yellow
White
Purple
Red
Cyan
Green
Blue
Black
15The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
V
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
(c)Mosaic : 2 Dot checker image
www.panelook.com
Page No. 16 / 31
L31
L0
Grey scale:L0~L255
L0: Luminance with all pixels black.
L255: Luminance with all pixels white.
Note (2) When fv is too low, a flicker may be occurred on the display.
Note (3) Input Rush Current condition
0.9VDD
GND
0.1VDD
5
500us~10ms
16The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
6.2 Back-Light Unit
The back-light system is an edge-lighting type with 4 CCFL
The characteristics of the lamp are shown in the following tables.
Item Symbol Min. Typ. Max. Unit Note
Lamp current IL 3.0 7.5 9.0 mA(rms) (1)
Lamp voltage VL 603 670 737 V(rms) IL=7.5mA
Frequency fL 40 50 80 KHz (2)
Operating Lifetime
Startup voltage Vs
LCD MODULE
Note (1)
Lamp current is measured with current meter for high frequency as shown below. Specified
values are for a single lamp. To exceed 7.5 mA, life time accelerate drop down and if to
exceed 9.0 mA has safety problem. If current lower than 3.5 mA, CCFL would be unstable or
damaged.
Note (2)
Lamp frequency may produce interference with horizontal synchronous frequency and this
may cause ripple noise on the display. Therefore lamp frequency shall be kept away from the
horizontal synchronous frequency and its harmonics as far as possible in order to avoid
interference.
Note (3)
Lamp life time (Hr) can be defined as the time in which it continues to operate under the
condition : Ta=25±3
o
brightness becomes less than 50%
www.panelook.com
Page No. 17 / 31
(Cold Cathode Fluorescent Lamp)
Hr 50,000-- -- Hour 6.5mA(3)
Hr 40,000-- 50,000Hour 7.5mA(3)
1595 at 25oC
1870
1
2
1
2
1
2
1
2
C, Typical IL value indicated in the above table and fL=48 kHz until the
-- -- V(rms)
1
2
1
2
1
2
1
2
A
A
A
A
o
C
at 0
INVERTER
(EMAX
PLCD0819402-
C)
.
17The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
Note (4)
CCFL inverter should be able to provide a voltage over specified value (Vs) in the above
table. Lamp units need at least Vs value shown above to ignition.
Note (5)
The voltage over specified value (Vs) should be applied to the lamp more than 1 second
after startup. Otherwise, the lamp may not be turned on. The used lamp current is the lamp
typical current.
Note (6)
The output voltage waveform and current waveform of the inverter must be symmetrical
(Unsymmetrical ratio is less than 10%). Please do not use the inverter which has
unsymmetrical voltage and current waveform, and spike waveform. The inverter design
which can provide the best optical performance, power efficiency, and lamp life should under
the following conditions.
a. The asymmetry rate of the inverter waveform should be less than 10%.
b. The distortion tae of the waveform should be within
c. The inverter output waveform should be better similar to the ideal sine wave.
Ip
Asymmetry rate = |I
Distortion rate = I
p-I-p
p
(or I-p) / I
| / I
www.panelook.com
I-p
rms x
100%
rms
Page No. 18 / 31
2±10%.
18The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
6.3 Interface Timing ( DE mode)
Item Symbol Min. Typ. Max. Unit
Frame Rate
Frame Period t1 1028 1066 1150 line
Vertical Display Time t2 1024 1024 1024 line
Vertical Blanking Time t3 4 42 126 line
1 Line Scanning Time t4 780 844 875 clock
Horizontal Display Time t5 640 640 640 clock
Horizontal Blanking Time t6 140 204 235 clock
Clock Rate t7 50 54 67.5 MHz
Timing Diagram of Interface Signal (DE mode)
www.panelook.com
Page No. 19 / 31
-- 56 60 76 Hz
19The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
NoteΚ(1) The supply voltage of the external system for the module input should be the
same as the definition of V
DD
.
(2) Apply the lamp volatge within the LCD operation range. When the back-light
turns on before the LCD operation or the LCD truns off before the back-light turns
off, the display may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or
keep a high impedance.
(4) TP4 should be measured after the module has been fully discharged between
power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
20The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
7.0 OUTLINE DIMENSION
7.1 Front View: Date: 2005.12.21
www.panelook.com
Page No. 21 / 31
21The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
BM Assembly Tolerance
| A-A’ | 1 (mm)
HSD190ME13- D Product Information (Tentative)
www.panelook.com
Page No. 22 / 31
| B-B’ | 1 (mm)
22The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
7.2 Back View: Date: 2006.01.20
www.panelook.com
Page No. 23 / 31
23The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
HSD190ME13- D Product Information (Tentative)
Document No. Revision 1.0
8.0 LOT MARK
8.1 Lot Mark
www.panelook.com
Page No. 24 / 31
10 11 12 13 14 15
code 1,2,3,4,5,6: HannStar internal fow control code.
code 7: production location.
code 8: production year.
code 9: production month.
code 10,11,12,13,14,15: serial number.
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. OctNov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
8.2 Location of Lot Mark
(1) The label is attached to the backside of the LCD module.
(2) This is subject to change without prior notice.
HSD190ME13
-D30
RoHS
Rev:
Lot mark
CN1
Up
Center of Active Area
CN5CN4
CN3
CN2
24The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Down
RISK OF ELECTRIC SHOCK DISCONNECT
THE ELECTRIC POWER BEFORE SERVICING
HIGH VOLTAGE CAUTION
COLD CATHODE FLUORESCENT LAMP IN LCD PANEL CONTAINS
A SMALL AMOUNT OF MERCURY. PLEASE FOLLOW LOCAL
ORDINANCES OR REGULATIONS FOR DISPOSAL.
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
9.0 PACKAGE SPECIFICATION
(1) package quantity in one carton: 8 pieces.
www.panelook.com
Page No. 25 / 31
(2) carton size: 544
(3) for domestic transportation only.
(4) refer to Hannstar document: DC111-011 19" LCD Module Package Specification(Monitor Type 2)
3 mm 302 3 mm 446H3 mm.
25The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
10.0 GENERAL PRECAUTION
10.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation
control systems, military systems and any other application where performance failure
could be life-threatening or otherwise catastrophic.
10.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD
module, and may cause scratches or dust on the display. HannStar does not warrant the
module, if customers disassemble or modify the module.
10.3 Breakage of LCD Panel
10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid
crystal, and do not contact liquid crystal with skin.
10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is
broken.
10.4 Electric Shock
10.4.1 Disconnect power supply before handling LCD module.
10.4.2 Do not pull or fold the CCFL cable.
10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s connector
or cables in order to prevent electric shock.
10.5 Absolute Maximum Ratings and Power Protection Circuit
10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental
temperature, etc., otherwise LCD module may be damaged.
10.5.2 Please do not leave LCD module in the environment of high humidity and high
temperature for a long time.
10.5.3 It’s recommended employing protection circuit for power supply.
www.panelook.com
Page No. 26 / 31
26The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
10.6 Operation
10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
Use fingerstalls of soft gloves in order to keep clean display quality, when persons
handle the LCD module for incoming inspection or assembly.
10.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other soft
material.
10.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color
fading.
11.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a little
petroleum benzene or other adequate solvent.
10.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
10.8 Static Electricity
10.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent
from electrostatic occurrence.
10.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is
very weak to electrostatic discharge. Please be careful with electrostatic
discharge.
10.8.3 Persons who handle the module should be grounded through adequate methods.
10.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
10.10 Disposal
When disposing LCD module, obey the local environmental regulations.
www.panelook.com
Page No. 27 / 31
27The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
/
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
ϥ 19”Carton CASE Package Instruction:
1.
www.panelook.com
Page No. 28 / 31
Input 19" LCM into ESD proof bag (w
bag opening upward )
2.
Fold bag opening and tape it (Shown
as picture)
28The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
3.
www.panelook.com
Page No. 29 / 31
Put 8pcs well packed 19"LCMs into a
carton case gently.
4.
Insert Top-side carton made crush
29The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
5.
www.panelook.com
Page No. 30 / 31
6. Seal the box with tape and Finish the package of 19’ LCM.
Carton Case appearance
30The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title
Document No. Revision 1.0
HSD190ME13- D Product Information (Tentative)
ϥ 19” LCM Carton Case unpack sequence
Reverse the package process shown above. And
1. Grab folded bag opening with 2 hands and pull.
www.panelook.com
Page No. 31 / 31
2. Hold and pull the LCM with fingers gently
.
31The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.