HannStar HSD190ME13-A13 Specification

Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 1 / 27
Document No. Revision 1.0
Hannstar Product Information
www.panelook.com
Model : HSD190ME13
- A13
Note: 1. Please contact HannStar Display Corp. before designing your product based on this module
specification.
2. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that herein.rein.
may result from application based on the module described
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 2 / 27
Document No. Revision 1.0
Rev. Updated No. Date Description of change
www.panelook.com
Record of Revisions
1.0
July 13, 2005
HSD190ME13-A product information was first issued.
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 3 / 27
Document No. Revision 1.0
1.0 General Descriptions ……………………………….… p.4
2.0 Absolute Maximum Ratings ………………………….. p.5
3.0 Optical Characteristics ……………………………….. p.7
www.panelook.com
Contents
4.0 Block Diagram ………………………………………… p.11
5.0 I/O Connection Pin Assignment …………………….. p.14
6.0 Electrical Characteristics ………………….……….. p.15
7.0 Outline Dimension …………………………….……… p.21
8.0 Lot Mark ……………………………………………….. p.24
9.0 Package Specification ……………………………...… p.25
10.0 General Precaution …………………………………… p.26
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 4 / 27
Document No. Revision 1.0
1.0 GENERAL DESCRIPTIONS
1.1 Introduction
HannS (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, the voltage reference, common voltage, DC-DC converter, column, and row driver circuit. This TFT LCD has a 19-inch diagonally measured active display area with SXGA resolution (1024 vertical by 1280 horizontal pixel array) and can display up to 16.7 million colors.
1.2 Features
tar Display model HSD190ME13-A1* is a color active matrix thin film transistor
19”SXGA TFT LCD Panel 4 CCFLs Backlight System
Supported SXGA (V:1024 lines, H:1280 pixels) Resolution
Supported to 75Hz Refresh Rate LCD Timing Controller
RoHS Compliance
VESA Compatible
www.panelook.com
1.3 Applications
Desktop Monitors Display terminals for AV applications
Monitors for industrial applications
1.4 General information
Item Specification Unit
Outline dimension 396*324 *17.5(Typ) mm
Display area 376.32 (H) x301.056 (V) (19.0” diagonal) mm
Number of
Pixel 1280(H) x 1024(V) Pixels
Pixel pitch 0.294(H) x 0.294(V) mm
Pixel arrangement RGB Vertical Stripe
Display color 16.2M (6-bit
s+FRC)
Display mode Normally white
Surface treatment Antiglare, Hard-Coating(3H)
W
eight 2600g(Typ.) g
Back-light 4-CCFLs, Top & bottom edge side
Input signal 2-ch LVDS
Power consumption
System 3.05
B/L 20
Optimum viewing direction 6 o’clock
W
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 5 / 27
Document No. Revision 1.0
www.panelook.com
1.5 Mechanical
Information
Item Min. Typ. Max. Unit
Horizontal(H) 395.5 396.0 396.5 mm
Module Size
Vertical(V) 323.5 324.0 324.5 mm
Depth(D) 17.0 17.5 18.0 mm
Weight (without inverter) 2450 2600 2750 g
orque of customer screw hole -- -- 3.0 Kgf*Cm
T
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item Symbol Min. Max. Unit Note
Storage temperature T
Operating temperature T
Vibration(non-operating) V
Shock(non-
Storage humidity H
Operating humidity HOP 10 80 %RH (4)
Low pressure(operating) P
Low pressur
operating) S
e(non-operating) P
-20 60
STG
0 50
OPR
-- 1.5 G (2)
NOP
--
NOP
10 90 %RH (3)
STG
697 -- HPa (5)
LOP
1
LNOP
16 -- HPa (6)
70 G (3)
o
C
o
C (1)
Note (1)Storage /Operating temperature
Humidity (%)
100
90
80
60
40
20
10
0
The informati
Storage Range
-20-40
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Operating Range
0
Temperature (
20 40 60
o
C)
50
65
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 6 / 27
Document No. Revision 1.0
(2) 5-500-5Hz sine wave, X,Y,Z each directions, 30 min/cycle. (3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test, It is necessary to fill the silicon rubber between the shock jig as buffer. (4) Max wet bulb temp. =39
(5) 2 hrs. (10000 feet) (6) 24hrs. (50000 feet)
2.2 Electrical Absolute Rating:
2.2.1 TFT LCD Module:
www.panelook.com
o
C
Item Symbol Min. Max. Unit. Note
Power supply Voltage VDD -0.3 5.5 V(DC) (1)(2)
2.2.2 Back Light Unit:
Item Symbol Min. Max. Unit Note
Lamp current IL 3.0 8.5 mA (1)(2)(3)
Lamp frequency fL 40 80 KHz (1)(2)(3)
Note: (1) Permanent damage may occur to the LCD module if beyond this specification.
Functional operation should be restricted to the conditions described under
Normal Operating Conditions.
(2) To exceed 7.5mA, life time accelerate drop down and if to exceed 8.5 mA has
safety problem. If current lower than 3.5 mA, CCFL would be unstable or
damaged.
(3) Within Ta=25±2°C
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 7 / 27
Document No. Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR 450 700 -- (1)(2)
Response time
Rising -- 2 4
Falling
TR +TF
www.panelook.com
msec (1)(3)
-- 6 8
White luminance (center of screen)
Red
Gree
Color
n
chromaticity (CIE1931)
Blue
White
Hor.
Viewing angle
Ver.
Hor.
iewing angle
V
Ver.
Brightness uniformity B
240 300 -- cd/m
Y
L
Rx
Ry
Gx
Gy
Bx
By
Wx
Wy
o
Ә=0
o
I=0
Normal viewing
angle
0.614 0.644 0.674
0.298 0.328 0.358
0.260 0.290
0.584 0.614 0.644
0.112 0.142 0.172
0.049 0.079 0.109
0.280 0.310 0.340
0.300 0.330 0.360
0.320
ӘL 65 75 -­Ә
65 75 --
R
CR>10
ӘH 55 75 -­Ә
L
55 60 --
ӘL -- 85 --
-- 85 --
Ә
R
CR>5
ӘH -- 85 -­Ә
UNI
L
o
Ә=0
o
I=0
-- 70 --
75 -- -- % (6)
(1)(4)
2
(IL=7.5mA)
(1)(4)
3.2 Measuring Condition
Measuring surrounding : dark room Lamp current I V
=5.0V, fV=60Hz, f
DD1
Surrounding temperature : 25±2
: (7.5)±0.1mA, lamp freq. FL=48 KHz,Inverter :EMAX PLCD0819402-C
BL
=54MHz
DCLK
o
C
30min. Warm-up time.
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 8 / 27
Document No. Revision 1.0
3.3 Measuring Equipment
MD-3000 of Otsuka Electric Corp., which utilized MCPD-7000 for Chromaticity
and BM-5A for other optical characteristics.
Measuring spot size : 10~12mm
Note (1) Definition of Viewing Angle:
www.panelook.com
ӥ
H
12’ o’clock
ӥ
=90
H
o
Ә
ӘL=90
L
o
ӥ
L
Ә
R
6’ o’clock
o
=90
ӥ
L
Note (2) Definition of Contrast Ratio(CR) :
measured at the center point of panel
Luminance with all pixels white (L255) CR = Luminance with all pixels black (L0)
ӘR=90
o
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 9 / 27
Document No. Revision 1.0
www.panelook.com
Note (3) Definition of Re
white(TFT OFF) black (TFT ON) white(TFT OFF)
100%
90%
sponse Time: Sum of T
R
T
Optical
response
10%
0%
Note (4) Optical characteristic measurement setup
and
R
T
F
F
T
Photo-detector (BM-5A)
time
Field=2
o
50cm
LCD panel
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 10 / 27
Document No. Revision 1.0
www.panelook.com
Note (5) Definition of Ce Center Luminance= Y1
1/10 H
1/10V
1/10V
nter Luminance of White (center)
1/2H
Y1
1/10H
1/2V
Note (6) Definition of brightness uniformity
(Min Luminance of 9 points)
Luminance uniformity = x 100%
(Max Luminance of 9 points)
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 11 / 27
Document No. Revision 1.0
4.0 BLOCK DIAGRAM
4.1 LCD Module Block Diagram:
TCON with
LVDS receiver
www.panelook.com
X-driver IC
Liquid Crystal Panel
Connector CN1
DC/DC
Converter
12801024 pixels
Y-driver IC
Gamma
Reference
Voltage
Generator
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 12 / 27
Document No. Revision 1.0
4.2 Back Light Unit
www.panelook.com
1 Hot 1 2 Cold 1
1 Hot 2 2 Cold 2
4.3 Pixel Format
1,1
1,2
(odd)
(even)
2,1
(odd)
1,3
(odd)
1,4
(even)
LCD Display Area
1
el
Pix
R
G
R
B
1280
1,
Back light lamp
CN2, 3, 4, 5.
1 Hot 2 Cold 1
1 Hot 2 2 Cold 2
1024 Lines
1
R
1024
,1
1024 1280
1280 Pixels
The informati
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 13 / 27
Document No. Revision 1.0
4.4 Relationship Between Displayed Color and Input
MSB LSB MSB LSB MSB LSB Gray scale
Display
Black L L L L L L L L L L L L L L L L L L L L L L L L -
Blue L L L L L L L L L L L L L L L L H H H H H H H H -
Green L L L L L L L L H H H H H H H H L L L L L L L L ­Basic color
Gray scale of Red
Gray scale of Green
Gray scale of Blue
Gray scale of White & Black
Light
Red H H H H H H H H L L L L L L L L L L L L L L L L ­Purple H H H H H H H H L L L L L L L L H H H H H H H H ­Yellow H H H H H H H H H H H H H H H H L L L L L L L L -
White Black
Dark L L L L L L H L L L L L L L L L L L L L L L L L L2
Light H H H H H H L H L L L L L L L L L L L L L L L L L253
Red H H H H H H H H L L L L L L L L L L L L L L L L Red L255
Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark
Light L L L L L L L L H H H H H H L H L L L L L L L L L253
Green L L L L L L L L H H H H H H H H L L L L L L L L Green L255
Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L L L L L L L L L L L L L L L L L H L L2
Light
Blue L L L L L L L L L L L L L L L L H H H H H H H H Blue L255
Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L H L L L L L L L H L L L L L L L H L L2
Light H H H H H H L H H H H H H H L H H H H H H H L H L253
White H H H H H H H H H H H H H H H H H H H H H H H H White L255
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Blue L L L L L L L L H H H H H H H H H H H H H H H H -
H H H H H H H H H H H H H H H H H H H H H H H H ­L L L L L L L L L L L L L L L L L L L L L L L L L0 L L L L L L L H L L L L L L L L L L L L L L L L L1
ХΝ Ν Ν L3ΞL251 Ц
ХΝ Ν Ν L3ΞL251 Ц
ХΝ Ν Ν L3ΞL251 Ц
ХΝ Ν Ν L3ΞL251 Ц
H H H H H H L L L L L L L L L L L L L L L L L L L252
H H H H H H H L L L L L L L L L L L L L L L L L L254
L L L L L L L L L L L L L L L H L L L L L L L L L1 L L L L L L L L L L L L L L H L L L L L L L L L L2
L L L L L L L L H H H H H H L L L L L L L L L L L252
L L L L L L L L H H H H H H H L L L L L L L L L L254
L L L L L L L L L L L L L L L L L L L L L L L H L1
L L L L L L L L L L L L L L L L H H H H H H L L L252
L L L L L L L L L L L L L L L L H H H H H H L H L253 L L L L L L L L L L L L L L L L H H H H H H H L L254
L L L L L L L H L L L L L L L H L L L L L L L H L1
H H H H H H L L H H H H H H L L H H H H H H L L L252
H H H H H H H L H H H H H H H L H H H H H H H L L254
www.panelook.com
Level
The informati
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 14 / 27
Document No. Revision 1.0
5.0 I/O CONNECTION PIN ASSIGNMENT
5.1 Interface Connector (30-pins, StarConn: 093G30-B001A, or JAE: FI-X30SSL-HF or equivalent)
Pin No. Signal Description
1 RinO0- Receiver Signal (-) 2 RinO0+ Receiver Signal (+) 3 RinO1- Receiver Signal (-) 4 RinO1+ Receiver Signal (+) 5 RinO2- Receiver Signal (-) 6 RinO2+ Receiver Signal (+) 7 VSS 8 RinOC- Clock Signal (-)
9 RinOC+ Clock Signal (+) 10 RinO3- Receiver Signal (-) 11 RinO3+ Receiver Signal (+) 12 13 RinE0+ Receiver Signal (+) 14 VSS Ground 15 16 RinE1+ Receiver Signal (+) 17 VSS 18 RinE2- Receiver Signal (-) 19 RinE2+ Receiver Signal (+) 20 RinEC- Clock Signal (-) 21 RinEC+ Clock Signal (+) 22 23 RinE3+ Receiver Signal (+) 24 VSS Ground 25 VSS Ground 26 NC 27 VSS Ground 28 VDD+5V Power Supply, 5V (Typical) 29 VDD+5V Power Supply, 5V (Typical) 30 VDD+5V Power Supply, 5V (Typical)
www.panelook.com
Ground
RinE0- Receiver Signal (-)
RinE1- Receiver Signal (-)
Ground
RinE3- Receiver Signal (-)
NC
5.2 Back Light Unit (CCFL) Connectors:
CN2, 3, 4, 5: CCFL Power Source (Yeon-Ho 35001HS-02L or equivalent)
Pin No. Symbol Color Function
1 Hot1 Pink
CCFL power supply (High voltage)
2 Cold1 White Ground
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 15 / 27
Document No. Revision 1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module:
Item Symbol Min. Typ. Max. Unit Note
Voltage of power supply VDD 4.5 5.0 5.5 V
Current of power supply
Vsync frequency fV 56 60 76 Hz (2)
Hsync frequency fH 64
Frequency f
Input rush current I
www.panelook.com
White I
V-Color I
Mosaic I
DD0
DD1
DD2
430 530 630
510 610
710
660 760 860
mA (1)
mA (1)
mA (1)
64 80 KHz
50 54 67.5 MHz
DCLK
-- -- 3.0 A (3)
RUSH
Note (1)
(a)White:
(b).V
-Color :
White
Yellow
Purple
Red
Cyan
Green
Blue
Black
The informati
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 16 / 27
Document No. Revision 1.0
(c)Mosaic : 2 Dot checker image
www.panelook.com
L31
L0
Grey scale:L0~L255
L0: Luminance with all pixels black.
L255: Luminance with all pixels white.
Note (2) When fv is too low, a flicker may be occurred on the display. Note (3) Input Rush Current condition
0.9VDD
GND
0.1VDD
5 V
500us~10ms
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 17 / 27
Document No. Revision 1.0
6.2 Back-Light Unit
The back-light system is an edge-lighting type with 4 CCFL
The characteristics of the lamp are shown in the following tables.
Item Symbol Min. Typ. Max. Unit Note
Lamp current IL 3.0 7.5 8.0 mA(rms) (1)
Lamp voltage VL 603 670 737 V(rms) IL=7.5mA
Frequency fL 40 50 80 KHz (2)
Operating Lifetime
tartup voltage Vs
S
www.panelook.com
(Cold Cathode Fluorescent Lamp)
Hr 50,000 -- -- Hour 6.5mA(3)
Hr 40,000 -- 50,000 Hour 7.5mA(3)
1450 at 25oC
1700
-- -- V(rms) at 0
o
C
.
1
2
1
2
1
2
1
2
A
A
INVERTER
(EMAX
PLCD0819402-
C)
LCD MODULE
1
1
2
2
1
1
2
2
Note (1) Lamp current is measured with current meter for high frequency as shown below. Specified
values are for a single lamp. To exceed 8.5.0mA, life time accelerate drop down and if to exceed 9.0 mA has safety problem. If current lower than 3.5 mA, CCFL would be unstable or damaged.
Note (2) Lamp frequency may produce interference with horizontal synchronous frequency and this
may cause ripple noise on the display. Therefore lamp frequency shall be kept away from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference.
A
A
Note (3) Lamp life time (Hr) can be defined as the time in which it continues to operate under the
condition : Ta=25±3
o
C, Typical IL value indicated in the above table and fL=48 kHz until the
brightness becomes less than 50%
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 18 / 27
Document No. Revision 1.0
Note (4) CCFL inverter should be able to provide a voltage over specified value (Vs) in the above
table. Lamp units need at least Vs value shown above to ignition.
Note (5) The voltage over specified value (Vs) should be applied to the lamp more than 1 second
after startup. Otherwise, the lamp may not be turned on. The used lamp current is the lamp typical current.
Note (6) The output voltage waveform and current waveform of the inverter must be symmetrical
(Unsymmetrical ratio is less than 10%). Please do not use the inverter which has unsymmetrical voltage and current waveform, and spike waveform. The inverter design which can provide the best optical performance, power efficiency, and lamp life should under the following conditions.
a. The asymmetry rate of the inverter waveform should be less than 10%. b. The distortion tae of the waveform should be within Ѕ2±10%. c. The inverter output waveform should be better similar to the ideal sine wave.
www.panelook.com
Ip
Asymmetry rate = |I Distortion rate = I
p (or I-p) / Irms
I-p
p-I-p| / Irms x 100%
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 19 / 27
Document No. Revision 1.0
6.3 Interface Timing ( DE mode)
Item Symbol Min. Typ. Max. Unit Frame Rate -- 56 60 76 Hz Frame Period t1 1028 1066 1150 line Vertical Display Time t2 1024 1024 1024 line Vertical Blanking Time t3 4 42 126 line 1 Line Scanning Time t4 780 844 875 clock Horizontal Display Time t5 640 640 640 clock
rizontal Blanking Time t6 140 204 235 clock
Ho Clock Rate t7 50 54 67.5 MHz
www.panelook.com
Timing Diagram of Interface Signal (DE mode)
ˡ˖˟˞
˗˘
˥ʿ˚ʿ˕ˮ˃ˍˊ˰
ˡ˖˟˞
˗˘
˥ʿ˚ʿ˕ˮ˃ˍˊ˰
˄˅ˆ
ˇ
ˊ
ˈ ˉ
ˌ˄˃˄˄
ˋ
˄˅
˄˅ˉˌ ˄˅ˊ˃
˄˅ˊ˄ ˄˅ˊ˅
˄˅ˊˆ ˄˅ˊˇ
˄˅ˊˈ ˄˅ˊˉ
˄˅ˊˊ ˄˅ˊˋ
˄˅ˊˌ ˄˅ˋ˃
˄˅ˆˇˈ
ˉ
The informati
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Κ
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 20 / 27
Document No. Revision 1.0
www.panelook.com
6.4
Power On / Off Sequence
Power On
Power Supply
0.9V
DD
0.1V
0V
DD
TP1
TP2
Signal
0.6V 0.6V
0V
Backlight
(Recommended)
TP5
50%
TP6
50%
Power Off
0.9V
TP3
DD
0.1V
DD
TP4
0.1V
DD
Item Min. Typ. Max. Unit Remark
TP1 0.5 -- 10 msec TP2 0 -- 50 msec TP3 0 -- 50 msec TP4 500 -- -- msec TP5 200 -- -- msec TP6 200 -- -- msec
NoteΚ(1) The supply voltage of the external system for the module input should be the
same as the definition of V
DD
.
(2) Apply the lamp volatge within the LCD operation range. When the back-light
turns on before the LCD operation or the LCD truns off before the back-light
turns off, the display may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or
keep a high impedance.
(4) TP4 should be measured after the module has been fully discharged between
power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 21 / 27
Document No. Revision 1.0
7.0 OUTLINE DIMENSION
7.1
Front View: Date: 2005.09.30
www.panelook.com
BM Assembly Tolerance
| A-A’ |  1 (mm)
| B-B’ |  1 (mm)
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 22 / 27
Document No. Revision 1.0
Back View: Date: 2005.09.30
7.2
www.panelook.com
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 23 / 27
Document No. Revision 1.0
8.0 LOT MARK
8.1 Lot Mark
www.panelook.com
ѾѿҀҁ҂҃҄҅҆
10 11 12 13 14 15
code 1,2,3,4,5,6: HannStar internal fow control code. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008
Mark 9 0 1 2 3 4 5 6 7 8
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark
1 2 3 4 5 6 7 8 9 A B C
8.2 Location of Lot Mark
(1) The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice.
Hannstar Display Corporation
HSD190ME13
HSD190ME13
HSD190ME13
-A00
-A02
-A13
Rev:
Rev:
Rev:
RoHS
Hannstar Display Corporation
MADE IN TAIWAN
MADE IN TAIWAN
CN1
Up
Center of Active Area
Lot mark
CN5
CN3
CN4
CN2
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Down
RISK OF ELECTRIC SHOCK DISCONNECT
THE ELECTRIC POWER BEFORE SERVICING
HIGH VOLTAGE CAUTION
COLD CATHODE FLUORESCENT LAMP IN LCD PANEL CONTAINS
A SMALL AMOUNT OF MERCURY. PLEASE FOLLOW LOCAL
ORDINANCES OR REGULATIONS FOR DISPOSAL.
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 24 / 27
Document No. Revision 1.0
9.0 PACKAGE SPECIFICATION
9.1 packing form
(1) package quantity in one carton: 8 pieces.
(2) carton size: 5443 mm3023 mm4463 mm.
(3) for domestic transportation only.
9.2 packing assembly drawings
LCD Module
www.panelook.com
Bag
Packing pair
Packing pair
Packing plate
Packing plate
Bag
Tape
One packing
Packing plate
Tape
Carton
Carton
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
www.panelook.com
Global LCD Panel Exchange Center
d
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 25 / 27
Document No. Revision 1.0
9.3 Pallet transportation specification
www.panelook.com
Pallet
Packing case
11505 mm
Ban
Band clip
Tape
97
10605 mm
05 mm
1 Pallet = 12 cartons
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 26 / 27
Document No. Revision 1.0
10.0 GENERAL PRECAUTION
10.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.
10.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.
10.3 Breakage of LCD Panel
10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin.
10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is broken
10.4 Electric Shock
10.4.1 Disconnect power supply before handling LCD module.
10.4.2 Do not pull or fold the CCFL cable.
10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s connector or cables in order to prevent electric shock.
10.5 Absolute Maximum Ratings and Power Protection Circuit
10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc.otherwise LCD module may be damaged.
10.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time.
10.5.3 It’s recommended employing protection circuit for power supply.
10.6 Operation
10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly.
10.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.
10.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color fading.
10.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzene or other adequate solvent.
www.panelook.com
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME13- A Product Information Page No. 27 / 27
Document No. Revision 1.0
10.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
10.8 Static Electricity
10.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
10.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is
very weak to electrostatic discharge. Please be careful with electrostatic discharge.
10.8.3 Persons who handle the module should be grounded through adequate methods.
www.panelook.com
10.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise, display characteristics may be changed.
10.10 Disposal
When disposing LCD module, obey the local environmental regulations.
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
on contained in this document is the exclusive property of HannStar Display Corporation. It shall not
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...