How it Works
HannStar
Loading...
HSD190ME12-A06
Specification
29 pgs846.92 Kb0

HannStar HSD190ME12-A06 Specification

Download
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 1 / 29
www.panelook.com
Document No. Revision
Hannst
ar Product Information
1.0
Model : HSD190ME12
- A06
Note: 1. Please contact HannStar Display Corp. before designing your product based on this module
specification.
2. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other
problems that
may result from application based on the module described herein.
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 2 / 29
www.panelook.com
Document No. Revision
1.0
Record of Revisions
Rev. Updated No. Date Description of change
1.0 ѧ July 11, 2005 HSD190ME12-A product information was first issued.
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 3 / 29
www.panelook.com
Document No. Revision
1.0
Contents
1.0 General descriptions ……………………………….… p.4
2.0 Absolute maximum ratings ………………………….. p.5
3.0 Optical characteristics ……………………………….. p.7
4.0 Block diagram ………………………………………… p.12
5.0 I/O Connection Pin assignment ……………………….. p.15
6.0 Electrical Characteristics ………………….…………. p.16
7.0 Input Timing Spec………………………………………… p.21
8.0 Outline dimension …………………………….……… p.22
9.0 Lot Mark ……………………………………………….. p.24
10.0 Package Specification ……………………………...… P.26
11.0 General precaution ………………………………….. p.28
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 4 / 29
www.panelook.com
Document No. Revision
1.0 GENERAL DESCRIPTIONS
1.1 Introduction
HannStar Display model HSD190ME12 is a color active matrix thin film transistor (TFT)
liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, the voltage reference, common voltage, DC-DC converter, column, and row driver circuit. This TFT LCD has a 19-inch diagonally measured active display area with SXGA resolution (1024 vertical by 1280 horizontal pixel array).
1.2 Features
19”SXGA TFT LCD panel
4 CCFLs Backlight system Supported SXGA (V:1024 lines, H:1280 pixels) resolution
Supported to 75Hz refresh rate
LCD Timing Controller Compatible with RoHS standard
1.3 General information
Item Specification Unit
Outline dimension 404.2(H) X 330(V) X 19.0 (typ.) mm
Display area 376.32(W) x 301.056(H) (19.0” diagonal) mm
Number of Pixel 1280(H) x 1024(V) Pixels
Pixel pitch 0.294(H) x 0.294(V) mm
Pixel arrangement
Display color
Display mode Normally white
Surface treatment Antiglare, Hard-Coating(3H)
RGB Vertical stripe
16.2M (6-bits+FRC)
1.0
Weight 2350(typ.) G
Back-light 4-CCFLs, Top & bottom edge side
Input signal 2 –CH LVDS
Power consumption
(with B/L)
Optimum viewing direction
System 3
W
B/L 22
6 o’clock
1.4 Applications
Desktop monitors
Display terminals for AV applications Monitors for industrial applications
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 5 / 29
www.panelook.com
Document No. Revision
1.5 Mechanical Information
Item Min. Typ. Max. Unit
Horizontal(H) 403.7 404.2 404.7 mm
Module Size
Vertical(V) 329.5 330 330.5 mm
Depth(D) 18.5 19 19.5 mm
Weight (without inverter) 2230 2350 2470 g
Torque of customer screw hole 3.0 Kgf*Cm
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item Symbol Min. Max. Unit Note
Storage temperature T
Operating temperature T
Vibration(non-operating) V
Shock(non-
operating) S
Storage humidity H
Operating humidity HOP 10 80 %RH (4)
Low pressure(operating) P
Low pressure(non-operating) P
-20 60
STG
0 50
OPR
-- 1.5 G (2)
NOP
--
NOP
10 90 %RH (3)
STG
697 -- HPa (5)
LOP
116 -- HPa (6)
LNOP
70 G (3)
1.0
o
C
o
C (1)
Note (1)Storage /Operating temperature
Humidity (%)
100
90
80
60
40
20
10
0
The informati
Storage Range
-20-40
Operating Range
0
Temperature (
20
o
C)
40 60
50
65
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 6 / 29
www.panelook.com
Document No. Revision
(2) 5-500 Hz sine wave, X,Y,Z each directions, 30 min/cycle. (3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test, It is necessary to fill the silicon rubber between the shock jig as buffer. (4) Max wet bulb temp. =39
o
C
(5) 2 hrs. (10000 feet) (6) 24hrs. (50000 feet)
2.2 Electrical Absolute Rating:
2.2.1 TFT LCD Module:
Item Symbol Min. Max. Unit. Note
Power supply Voltage
V
DD
-0.3 5.5
V(DC)
(1)(2)
2.2.2 Back Light Unit:
Item Symbol Min. Max. Unit Note
1.0
Lamp current IL 3.5 9.0 mA (1)(2)
Lamp frequency fL 40 80 KHz (1)(2)
Note: (1) Permanent damage may occur to the LCD module if beyond this specification.
Functional operation should be restricted to the conditions described under
Normal Operating Conditions.
(2) To exceed 6.5mA, life time accelerate drop down and if to exceed 9.0 mA has
safety problem. If current is lower than 3.5 mA, CCFL would be unstable or
damaged.
(3) Within Ta=25±2°C.
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 7 / 29
www.panelook.com
Document No. Revision
3.0 OPTICAL CHARACTERISTICS
3.1 Optical
Contrast CR
Response time
White luminance (center of screen)
Color chromaticity (CIE1931)
Viewing angle
Viewing angle
Brightness u
Crosstalk CT(n)
specification
Item Symbol Condition Min. Typ. Max. Unit Note
450 700 -- (1)(2)
Rising TR -- 3.6 7
Falling TF 8.4 11
200 250 cd/m
Y
Red
Gree
n
Blue
White
Hor.
Ver.
Hor.
Ver.
niformity B
L
Rx
Ry
Gx
Gy
Bx
By
Wx
Wy
ӘL 60 75 --
60 75 --
Ә
R
ӘH 55 70 -­Ә
L
ӘL -- 80 --
-- 80 --
Ә
R
ӘH -- 75 -­Ә
L
75 80
UNI
o
Ә=0
o
I=0
Normal viewing
angle
CR>10
CR>5
o
Ә=0
o
I=0
0.617 0.647 0.677
0.297 0.327 0.357
0.262 0.292 0.322
0.584 0.614 0.644
0.112 0.142 0.172
0.049 0.079 0.109
0.280 0.310 0.340
0.300 0.330 0.360
55 65 --
-- 75 --
-- % (6)
-- -- 1.3 % (7)
1.0
msec (1)(3)
(1)(4)
2
(IL=6.5mA)
(1)(4)
3.2 Measuring Condition
Measuring surrounding : dark room Lamp current I V
=5.0V, fV=60Hz, f
DD1
Surrounding temperature : 25±2
: (6.5)±0.1mA, lamp freq. FL=48 KHz,Inverter :EMAX19402E(22pf)
BL
=54MHz
DCLK
o
C
30min. Warm-up time.
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 8 / 29
www.panelook.com
Document No. Revision
3.3 Measuring Equipment
MD-3000 of Otsuka Electric Corp., which utilized MCPD-7000 for Chromaticity
and BM-5A for other optical characteristics.
Measuring spot size : 10~12mm
Note (1) Definition of Viewing Angle:
ӥ
H
12’ o’clock
o
=90
ӥ
H
1.0
Ә
ӘL=90
L
o
ӥ
L
Ә
R
6’ o’clock
o
=90
ӥ
L
Note (2) Definition of Contrast Ratio(CR) :
measured at the center point of panel
Luminance with all pixels white (L255) CR = Luminance with all pixels black (L0)
ӘR=90
o
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 9 / 29
www.panelook.com
Document No. Revision
Note (3) Definition of Response Time: Sum of TR and T
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
R
10
0%
90%
F
T
F
Optical
response
10%
0%
1.0
time
Note (4) Optical characteristic measurement setup
Field=2
o
50cm
Photo-detector (BM-5A)
LCD panel
The informati
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 10 / 29
www.panelook.com
Document No. Revision
Note (5) Definition of Ce
Center Luminance= Y1
1/10 H
nter Luminance of White
1/10H
1/2H
1/10V
Y1
1/2V
1.0
1/10V
Note (6) Definition of brightness uniformity
(Min Luminance of 9 points)
Luminance uniformity = x 100%
(Max Luminance of 9 points)
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
(3)
(3)
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 11 /29
www.panelook.com
Document No. Revision
Note (7) Definition of crosstalk CT (1) ~ CT (4)
L (n) – LB (n) CT(n) = x 100% , n = 1 ~ 4 L (n)
Where L(n) = Luminance of point “n” at pattern A (cd/m
LB(n) = Luminance of point “n” at pattern B (cd/m
2
) , n=1Д4
2
) , n=1Д4
The location measured will be exactly the same in both patterns.
L0: Luminance with all pixels black
L255: Luminance with all pixels white
Gray scale: L127
Gray scale: L0
Gray scale: L127
1.0
1
Ё
1
Ё
4
V
8
V
V
L(1)
L(4)
V
L
1
Ё
V
2
1
Ё
V
1
4
Ё
V
8
1
Ё
H
8
1
Ё
4
L(2)
1
Ё
H
8
1
Ё
H
1
Ё
H
2
H
4
1
Ё
V
2
H
1
Ё
1
Ё
V
8
V
4
LB(1)
LB(4)
LB
1
Ё
V
1
4
Ё
V
8
1
Ё
H
8
1
Ё
4
LB(2)
1
Ё
H
8
1
Ё
H
1
Ё
H
2
H
4
H
Pattern A Pattern B
The informati
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 12 /29
www.panelook.com
Document No. Revision
4.0 BLOCK DIAGRAM
4.1 LCD Module Block Diagram:
DC/DC Converter
Liquid Crystal Panel
Connector
-driver IC Y
12801024 pixels
-driver IC
X
TCON
1.0
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 13 /29
www.panelook.com
Document No. Revision
4.2 Back Light Unit
1.0
1 Hot 1 2 Cold 1
1 Hot 2 2 Cold 2
Back light lamp
CN2, 3, 4, 5.
Hot 1
1 2 Cold 1
1 Hot 2 2 Cold 2
4.3 Pixel Format
1,2
1,3
(odd)
1,4
(even)
LCD Display Area
1 Pixel
R
G
R
R
B
2,1
(odd)
1024
,1
(even)
1280 Pixels
The informati
1280
1,
1024 Lines
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 14 /29
www.panelook.com
Document No. Revision
4.4 Relationship Between Displayed Color and Input
MSB LSB MSB LSB MSB LSB Gray scale
Display
Black
Blue L L L L L L L L L L L L L L L L H H H H H H H H -
Green L L L L L L L L H H H H H H H H L L L L L L L L ­Basic color
Gray scale of Red
Gray scale of Green
Gray scale of Blue
Gray scale of White & Black
Light
Red H H H H H H H H L L L L L L L L L L L L L L L L ­Purple H H H H H H H H L L L L L L L L H H H H H H H H ­Yellow H H H H H H H H H H H H H H H H L L L L L L L L -
White H H H H H H H H H H H H H H H H H H H H H H H H ­Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L H L L L L L L L L L L L L L L L L L L2
Light
Red H H H H H H H H L L L L L L L L L L L L L L L L Red L255
Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L L L L L L L L L H L L L L L L L L L L2
Light L L L L L L L L H H H H H H L H L L L L L L L L L255
Green L L L L L L L L H H H H H H H H L L L L L L L L Green L255
Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L L L L L L L L L L L L L L L L L H L L2
Light L L L L L L L L L L L L L L L L H H H H H H L H L255
Blue L L L L L L L L L L L L L L L L H H H H H H H H Blue L255
Black L L L L L L L L L L L L L L L L L L L L L L L L L0
Dark L L L L L L H L L L L L L L H L L L L L L L H L L2
Light H H H H H H L H H H H H H H L H H H H H H H L H L255
White H H H H H H H H H H H H H H H H H H H H H H H H White L255
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
L L L L L L L L L L L L L L L L L L L L L L L L -
Blue L L L L L L L L H H H H H H H H H H H H H H H H -
L L L L L L L H L L L L L L L L L L L L L L L L L1
ХΝ Ν Ν L3ΞL251 Ц
H H H H H L H H L L L L L L L L L L L L L L L L L255
H H H H H H L H L L L L L L L L L L L L L L L L L255 H H H H H H H L L L L L L L L L L L L L L L L L L255
L L L L L L L L L L L L L L L H L L L L L L L L L1
ХΝ Ν Ν L3ΞL251 Ц
L L L L L L L L H H H H H L H H L L L L L L L L L255
L L L L L L L L H H H H H H H L L L L L L L L L L255
L L L L L L L L L L L L L L L L L L L L L L L H L1
ХΝ Ν Ν L3ΞL251 Ц
L L L L L L L L L L L L L L L L H H H H H L H H L255
L L L L L L L L L L L L L L L L H H H H H H H L L255
L L L L L L L H L L L L L L L H L L L L L L L H L1
ХΝ Ν Ν L3ΞL251 Ц
H H H H H L H H H H H H H L H H H H H H H L H H L255
H H H H H H H L H H H H H H H L H H H H H H H L L255
1.0
Level
The informati
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 15 /29
www.panelook.com
Document No. Revision
5.0 I/O CONNECTION PIN ASSIGNMENT
5.1 Interface Connector (30-pins ) (JAE: FI-X30SSL-HF or equivalent
Pin No. Signal Description
1 2 RinO0+ Receiver Signal (+) 3 RinO1- Receiver Signal (-) 4 RinO1+ Receiver Signal (+) 5 RinO2- Receiver Signal (-) 6 7 VSS Ground 8 RinOC- Clock Signal (-)
9 RinOC+ Clock Signal (+) 10 RinO3- Receiver Signal (-) 1
1 RinO3+ Receiver Signal (+) 12 RinE0- Receiver Signal (-) 13 RinE0+ Receiver Signal (+) 14 VSS Ground 15 16 RinE1+ Receiver Signal (+) 17 VSS 18 RinE2- Receiver Signal (-) 19 RinE2+ Receiver Signal (+) 20 RinEC- Clock Signal (-) 21 RinEC+ Clock Signal (+) 22 23 RinE3+ Receiver Signal (+) 24 VSS Ground 25 VSS 26 NC NC 27 VSS Ground 28 VDD+5V Power Supply, 5V (Typical) 29 VDD+5V Power Supply, 5V (Typical) 30 VDD+5V Power Supply, 5V (Typical)
RinO0- Receiver Signal (-)
RinO2+ Receiver Signal (+)
RinE1- Receiver Signal (-)
Ground
RinE3- Receiver Signal (-)
Ground
1.0
)
Note 1) Please connects NC pin & Test pin to nothing. Don’t connect it to ground nor to other signal input. Note 2) Please connects GND pin to ground. Don’t use it as no-connect nor connect with
high impedanc
5.2 Back Light Unit (CCFL) Connectors:
CN2, 3, 4, 5: CCFL Power Source (BHR-02VS-1)
Pin No. Symbol Color Function
1 Hot1 Pink CCFL power supply (High voltage) 2 Cold1 White Ground
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 16 /29
www.panelook.com
Document No. Revision
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module:
Item Symbol Min. Typ. Max. Unit Note
Voltage of power supply VDD 4.5 5.0 5.5 V
Current of power supply
Vsync frequency fV 56 60 76 Hz (2)(3)
Hsync frequency fH 64 64 80 KHz
Frequency f
Input rush current I
Note (1)
1). V-Color :
V-
Color I
Mosaic I
White
Yellow
Purple
330
DD1
380 480 580 mA (1)(3)
DD2
50 54 67.5 MHz
DCLK
--- --- 3.0 A (3)(4)
RUSH
Red
Cyan
Green
Blue
Black
430 530 mA (1)(3)
1.0
The informati
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 17 /29
www.panelook.com
Document No. Revision
2). Mosaic : Dot checker image
L7
Grey scale: L0ДL255 L0: Luminance with all pixels black.
L255: Luminance with all pixels white.
L0
1.0
Note (2) When fv is too low, a flicker may be occurred on the display. Note (3) Input Rush Current condition
0.9VDD
GND
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
0.1VDD
5.0V
Min 0.5ms
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 18 /29
www.panelook.com
Document No. Revision
6.2 Back-Light Unit
The back-light system is an edge-lighting type with 4 CCFL
(Cold Cathode Fluorescent Lamp)
The characteristics of the lamp are shown in the following tables.
Item Symbol Min. Typ. Max. Unit Note
Lamp current IL 3.5 6.5 9.0 mA(rms) (1)
Lamp volt
age VL 630 700 770 V(rms) I
Frequency fL 40 48 80 KHz (2)
Operating lamp life time Hr 50000 -- -- Hour 6.5mA (3)
Startup voltage Vs
1210 -- at 25oC
1430
--
-
V(rms)
1.0
=6.5mA
L
o
at 0
.
C
1
2
1
2
1
2
1
2
A
A
INVERTER
(EMAX19402E
-22pf)
LCD MODULE
1
1
2
2
1
1
2
2
Note (1) Lamp current is measured with current meter for high frequency as shown below. Specified
values are for a single lamp. To exceed 6.5mA, life time accelerate drop down and if to exceed 9.0 mA has safety problem. If current lower than 3.5 mA, CCFL would be unstable or damaged.
Note (2) Lamp frequency may produce interference with horizontal synchronous frequency and this
may cause ripple noise on the display. Therefore lamp frequency shall be kept away from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference.
Note (3) Lamp life time (Hr) can be defined as the time in which it continues to operate under the
condition : Ta=25±3
o
C, Typical IL value indicated in the above table and fL=48 kHz until the
brightness becomes less than 50%
A
A
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 19 /29
www.panelook.com
Document No. Revision
Note (4) CCFL inverter should be able to provide a voltage over specified value (Vs) in the above
table. Lamp units need at least Vs value shown above to ignition. Note (5) The voltage over specified value (Vs) should be applied to the lamp more than 1 second
after startup. Otherwise, the lamp may not be turned on. The used lamp current is the lamp typical current.
Note (6) The output voltage waveform and current waveform of the inverter must be symmetrical
(Unsymmetrical ratio is less than 10%). Please do not use the inverter which has unsymmetrical voltage and current waveform, and spike waveform. The inverter design which can provide the best optical performance, power efficiency, and lamp life should under the following conditions.
a. The asymmetry rate of the inverter waveform should be less than 10%. b. The distortion tae of the waveform should be within Ѕ2±10%. c. The inverter output waveform should be better similar to the ideal sine wave.
1.0
Ip
I-p
Asymmetry rate = |I Distortion rate = I
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
p
| / I
p-I-p
(or I-p) / I
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
rms
rms
x 100%
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 20 /29
www.panelook.com
Document No. Revision
6.3 Interface Timing ( DE mode)
Item Symbol Min. Typ. Max. Unit Frame Rate -- 56 60 76 Hz Fram
e Period t1 1032 1066 1100 line Vertical Display Time t2 1024 1024 1024 line Vertical Blanking Time t3 8 42 -- line 1 Line Scanning Time t4 780 844 880 clock Horizontal Display Time t5 640 640 640 clock Horizontal Blanking Time t6 140 204 -- clock Clock Rate t7 50 54 67.5 MHz
1.0
Timing Diagram of Interface Signal (DE mode)
ˡ˖˟˞
˗˘
˥ʿ˚ʿ˕ˮ˃ˍˊ˰
ˡ˖˟˞
˗˘
˥ʿ˚ʿ˕ˮ˃ˍˊ˰
The informati
˄˅ˆ
ˇ
ˊ
ˈ ˉ
ˌ˄˃˄˄
ˋ
˄˅
˄˅ˉˌ ˄˅ˊ˃
˄˅ˊ˄ ˄˅ˊ˅
˄˅ˊˆ ˄˅ˊˇ
˄˅ˊˈ ˄˅ˊˉ
˄˅ˊˊ ˄˅ˊˋ
˄˅ˊˌ ˄˅ˋ˃
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
˄˅ˆˇˈ
ˉ
www.panelook.com
Global LCD Panel Exchange Center
Κ
(
d
)
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 21 /29
www.panelook.com
Document No. Revision
7.0 Input Timing Spec
7.1 Power On / Off Sequence
Power On
Power Off
Power Supply
0.9V
0.1V
DD
0.1V
TP4
0V
0V
0.1V
Signal
0.9V
DD
TP1
TP2
0.6V 0.6V
TP5
TP3
TP6
Backlight
Recommende
50%
50%
1.0
DD
Item Min. Typ. Max. Unit Remark
TP1 0.5 TP2 0 TP3 0 TP4 0.5 TP5 200 TP6 200
Ё Ё Ё ЁЁ ЁЁ ЁЁ
10 msec 50 msec 50 msec
sec msec msec
NoteΚ(1) The supply voltage of the external system for the module input should be the
same as the definition of V
DD
.
(2) Apply the lamp volatge within the LCD operation range. When the back-light
turns on before the LCD operation or the LCD truns off before the back-light turns
off, the display may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or
keep a high impedance.
(4) T4 should be measured after the module has been fully discharged between
power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 22 /29
www.panelook.com
Document No. Revision
8.0 OUTLINE DIMENSION
8.1 Front View: Date: 2004.04.30
1.0
Note: BMΚΪΪA-BΪ & ΪC-DΪ < 1.0mm
LCD
c
a
b
Bezel
d
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Active
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 23 /29
www.panelook.com
Document No. Revision
.2 Back View :
8
1.0
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 24 /29
www.panelook.com
Document No. Revision
9.0 LOT MARK
9.1 Lot Mark
１２３４５６７８９
code 1,2,3,4,5,6: HannStar internal flow control code. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008
Mark 9 0 1 2 3 4 5 6 7 8
10 11 12 13 14 15
1.0
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
9.2 Sub
Model Code
1 2 3
code 1: Panel sub model code of type. (A~Z) code 2,3: Panel product sub model code of serial number. (00~99)
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 25 /29
www.panelook.com
Document No. Revision
9.3 Location of Lot Mark
(1) The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice.
HSD190ME12
HSD190ME12
-A02
-A06
Rev:
Rev:
RoHS
Hannstar Display Corporation
MADE IN TAIWAN
Lot mark
1.0
Sub module code
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 26 /29
www.panelook.com
Document No. Revision
10.0 PACKAGE SPECIFICATION
10.1 packing form
(1) package quantity in one carton: 8 pieces.
(2) carton size: 5443 mm3023 mm4463 mm.
(3) for domestic transportation only.
packing assembly drawings
10.2
LCD Module
Bag
1.0
Packing pair
Packing pair
Packing plate
Packing plate
Bag
Tape
One packing
Packing plate
Tape
Carton
Carton
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
d
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 27 /29
www.panelook.com
Document No. Revision
10.3 Pallet transportation specification
Ban
Packing case
Band clip
1.0
Pallet
11505 mm
1 Pallet = 12 cartons
97
05 mm
10605 mm
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 28 /29
www.panelook.com
Document No. Revision
11.0 GENERAL PRECAUTION
11.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.
11.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.
11.3 Breakage of LCD Panel
11.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid Crystal, and do not contact liquid crystal with skin.
11.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
11.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
Rinse thoroughly with water.
11.3.4 Handle carefully with chips of glass that may cause injury, when the glass is
Broken
11.4 Electric Shock
11.4.1 Disconnect power supply before handling LCD module.
11.4.2 Do not pull or fold the CCFL cable.
11.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s connector or cables in order to prevent electric shock.
11.5 Absolute Maximum Ratings and Power Protection Circuit
11.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature; etc otherwise LCD module may be damaged.
11.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time.
11.5.3 It’s recommended employing protection circuit for power supply.
11.6 Operation
11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead. Use fingerstalls of soft gloves in order to keep clean display quality, when Persons handle the LCD module for incoming inspection or assembly.
11.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other soft
Material
11.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops
Contact with polarizer for a long time, they may causes deformation or color Fading
11.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a little
Petroleum benzene or other adequate solvent
1.0
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD190ME12- A Product Information Page No. 29 /29
www.panelook.com
Document No. Revision
11.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
11.8 Static Electricity
11.8.1 Protection film must remove very slowly from the surface of LCD module to Prevent from electrostatic occurrence.
11.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is Very weak to electrostatic discharge, Please be careful with electrostatic Discharge
11.8.3 Persons who handle the module should be grounded through adequate
methods.
11.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise, Display characteristics may be changed.
11.10 Disposal
When disposing LCD module, obey the local environmental regulations.
1.0
The informati be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use