How it Works
HannStar
Loading...
HSD170MGW1-B01
Product Specification
30 pgs500.88 Kb0

HannStar HSD170MGW1-B01 Product Specification

Download
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 1 / 30
Document No. DC130-004640 Revision 1.0
TO : WEIHAI DAEWOO
Date : Mar, 18, 2010
Customer Acceptance Specification
Model : HSD170MGW1
-B01
Note:
1. Please contact HannStar Display Corp. before designing your product based on this module specification.
2. The information contained herein is presented merely to indicate the characteristics and performance of our
www.jxlcd.com
www.jxlcd.com
相關文件：DC130-004641,DC130-004642,DC130-004643
Accepted by:
Signature Date
Proposed by: Technical Service Division
Signature Date
products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that may result from application based on the module described herein.
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 2 / 30
Document No. DC130-004640 Revision 1.0
Record of Revisions
Rev.
1.0 Mar,18, 2010
Date Sub-Model
www.jxlcd.com
www.jxlcd.com
B01
Description of change
Tentative specification was first released
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 3 / 30
Document No. DC130-004640 Revision 1.0
Contents
1.0 General description ……………………………….… p.5
2.0 Absolute maximum ratings …………………………. p.7
3.0 Optical characteristics ………………………………. p.9
4.0 Block diagram ……………………………………….. p.13
5.0 Interface pin connection ……………………………. p.16
6.0 Electrical characteristics ……………………………. p.17
7.0 Outline dimension …………………………………… p.25
8.0 Lot mark …………………………….………………… p.28
9.0 Package specification ………………………………. p.29
10.0 General precaution ………………………………….. p.30
www.jxlcd.com
www.jxlcd.com
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 4 / 30
Document No. DC130-004640 Revision 1.0
1.0 GENERAL DESCRIPTION
1.1 Introduction
HannStar Display model HSD170MGW1-B01 is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 17.0 inch diagonally measured active display area with XGA resolution (900 vertical by 1440 horizontal pixel array) and can display up to
16.2M (6-bit+FRC)
1.2 Features
■ 17.0 WXGA+ for Monitor application
■ High Resolution: 1440*900
■ 2-ch LVDS interface system
■
LCD Timing Controller
■ Wide Viewing Angle
■ RoHS compatible
■ VESA Compatible
■ TCO’03 Compliance [Remark(1)]
1.3 Applications
■ Desktop Monitor
www.jxlcd.com
www.jxlcd.com
■ Display terminals for AV applications
■
Display terminals for industrial application
Remark(1): There are two functions, brightness and contrast tuning, to let luminance to 125cd/m2 in OSD. OSD shouldn't restrict the panel's G-T curve for brightness to be 125cd/m2. The higher contrast, the higher angular uniformity. That is to say, if OSD want to tune the panel's luminance to 125 cd/m2, the suitable way is to only tune the brightness function. And if tuning the brightness function to 125 cd/m2, it would be better only to tuning the inverter, not the gray level.
colors.
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 5 / 30
Document No. DC130-004640 Revision 1.0
1.4 OUTLINE DIMENSION
Item Specification Unit Outline Dimension 389.2 x 254.5 x 11.7 (Typ.) mm Display area 367.2 (H) x 229.5 (V) mm Number of Pixel 1440(H) x 900(V) pixels Pixel pitch 0.255(H) x 0.255(V) mm Pixel arrangement RGB Vertical stripe Display color 16.2M (6-bit+FRC) colors Color Gamut 63% NTSC Display mode Normally white Surface treatment Antiglare (3H) Weight 1365 g Back-light 2-CCFLs, Top & bottom edge side Input signal 2-ch LVDS
Power Consumption
www.jxlcd.com
www.jxlcd.com
1.5 Mechanical Information
Module
Size
Weight (Without inverter) Torque of customer screw hole
Logic System 3.0(TYP.) W B/L System 11.76(TYP.) W
Item Min. Typ. Max. Unit Horizontal (H) 388.7 389.2 389.7 mm Vertical (V) 254.0 254.5 255.0 mm Depth (D)
11.4 11.7
-
- - 3.0
1365 - g
12.0 mm
Kgf•Cm
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
40
0
20 40
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 6 / 30
Document No. DC130-004640 Revision 1.0
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item Symbol Min. Max. Unit Note Storage temperature T Operating temperature T Vibration (non-operating) V
Shock (non-operating) S Storage humidity H
-20 60
STG
0 50
OPR NOP
NOP
10 90 %RH (3)
STG
－ －
1.5 G (2) 70 G (3)
o
C
o
C (1)
Operating humidity HOP 10 90 %RH (4) Low pressure (operating) P
Low pressure (non-operating) P
697
LOP
116
LNOP
－ －
hPa (5) hPa (6)
Note (1) Storage / Operating temperature
Humidity (%)
www.jxlcd.com
www.jxlcd.com
-40
-20
(2) 5-500-5Hz sine wave, X, Y, Z each directions, 30min/cycle.
100
90
80
60
Storage Range
20 10
0
Temperature (oC)
Operating Range
50
60
(3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test, it is
necessary to fill the silicon rubber between the shock jig as buffer. (4) Max wet bulb temp.= 39oC (5) 2hrs. (10000 feet) (6) 24hrs. (50000 feet)
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 7 / 30
Document No. DC130-004640 Revision 1.0
2.2 Electrical Absolute Rating
2.2.1 TFT LCD Module
Item Symbol Min. Max. Unit Note Power supply voltage VDD -0.3 6.0 V (1) (2) Logic input voltage VIN -0.3 VDD+0.3
2.2.2 Back-Light Unit
Item Symbol Min. Max. Unit Note Lamp current IL 3.5 Lamp frequency fL 40 60 KHz (1) (2)
Note (1) Permanent damage may occur to the LCD module if beyond this specification.
Functional operation should be restricted to the conditions described under normal operating conditions.
(2) Ta =25±2℃
8.0
mA (1) (2)
V (1) (2)
www.jxlcd.com
www.jxlcd.com
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 8 / 30
Document No. DC130-004640 Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR Response
time White luminance
(Center)
Color chromaticity
(CIE1931)
www.jxlcd.com
www.jxlcd.com
Viewing angle
Viewing angle
Rising TR - 1.5
Falling TF -
YL 200 250
Rx
Red
Ry Gx
Green
Gy Bx
Blue
By
Wx 0.283
White
Wy
Θ
Hor.
Ver.
Hor.
Ver.
Θ Θ Θ Θ Θ Θ Θ
R
D
U
R
D
U
L
L
Θ=0
viewing
angle
-
-
CR>10
CR>5
500 600
3.5 7
0.621
0.302
0.288
0.539
0.117
0.061
0.299 70
70 75 55 75
75 85 - 75 85 75 85
0.651 0.681
0.332 0.362
0.318 0.348
0.569 0.599
0.147 0.177
0.091 0.121
0.313 0.343
0.329 0.359 80 ­80 ­85 65 85 -
- (1)(2)
3
msec (1)(3)
(1)(4)(5)
2
-
-
-
-
-
cd/m
(IL=7.5mA)
(1)(4)
Θ
Brightness uniformity B
UNI
=0
70 75 - % (6)
3.2 Measuring Condition
■ Measuring surrounding: dark room
■ Lamp current IBL: 7.5±0.1mA, lamp freq. FL=50 KHz, Inverter: TDK TBD315NR-1
■ VDD=5.0V, fV=60Hz
■ Ambient temperature: 25±2oC
■ 30min. Warm-up time.
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
o
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 9 / 30
Document No. DC130-004640 Revision 1.0
3.3 Measuring Equipment
■ FPM520 of Westar Electric Corp., which utilized SR-3 for Chromaticity and BM-5A for other optical characteristics.
■
Measuring spot size: 20~21mm
Note (1) Definition of Viewing Angle:
Note (2) Definition of Contrast Ratio (CR): measured at the center point of panel
Luminance with all pixels white (L63) CR = Luminance with all pixels black (L0)
Note (3) Definition of Response Time: Sum of TR and TF
www.jxlcd.com
www.jxlcd.com
Φ=180
Θ
L
6’ o’clock
Φ=270
Θ
Θ
U
12’ o’clock
Φ=90
Θ
D
o
o
R
Φ=0o
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 10 / 30
Document No. DC130-004640 Revision 1.0
Optical response
Note (4) Optical characteristic measurement setup
LCD Panel
www.jxlcd.com
www.jxlcd.com
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
100%
90%
10%
0%
120cm
R
Field = 1
o
T
F
Photo-detector (BM-5A)
time
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Y1
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 11 / 30
Document No. DC130-004640 Revision 1.0
Note (5) Definition of Average Luminance of White
Y
Center Luminance =
1
1/10V
1/10 H
1/2H
1/10H
1/2V
1/10V
www.jxlcd.com
www.jxlcd.com
Note (6) Definition of brightness uniformity
Luminance uniformity = ×100%
be disclosed, distributed or reproduced in whole or in part with Corporation.
(Min Luminance of 9 points) (Max Luminance of 9 points)
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 12 / 30
Document No. DC130-004640 Revision 1.0
4.0 BLOCK DIAGRAM
4.1 TFT LCD Module
X-driver IC
Connector CN1
Converter
TCON with
LVDS receiver
DC/DC
Liquid Crystal Panel
1440×900 pixels
Y-driver IC
Gamma
Reference
Voltage
www.jxlcd.com
www.jxlcd.com
Generator
4.2 Back Light Unit
CN3
2 Cold1 1 Hot 1
CN4
1 Hot 2 2 Cold 2
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
B G
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 13 / 30
Document No. DC130-004640 Revision 1.0
4.3 Pixel Format
1,1
1,2
1,3
(odd)
(even)
2,1
(odd)
900,1
www.jxlcd.com
www.jxlcd.com
(odd)
1,4
(even)
LCD Display Area
1 Pixel
R
R
1440Pixels
R
1,1440
900, 1440
900 Lines
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
scale of
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 14 / 30
Document No. DC130-004640 Revision 1.0
4.4 Relationship Between Displayed Color and Input
Basic color
Gray scale of Red
Gray scale of Green
Gray scale of Blue
Gray White &
Black
MSB LSB
Display
Black L L L L L L L L L L L L L L L L L L
Blue L L L L L L L L L L L L H H H H H H
Green L L L L L L H H H H H H L L L L L L
Light Blue L L L L L L H H H H H H H H H H H H
Red H H H H H H L L L L L L L L L L L L Purple H H H H H H L L L L L L H H H H H H Yellow H H H H H H H H H H H H L L L L L L
White H H H H H H H H H H H H H H H H H H
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Red H H H H H H L L L L L L L L L L L L Red L63
Black L L L L L L L L L L L L L L L L L L
Dark
www.jxlcd.com
Light
Green L L L L L L H H H H H H L L L L L L Green L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Blue L L L L L L L L L L L L H H H H H H Blue L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
White H H H H H H H H H H H H H H H H H H White L63
R5 R4 R3 R2 R1 R0
L L L L L H L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L
↑ ↓
H H H H L H L L L L L L L L L L L L H H H H H L L L L L L L L L L L L L
L L L L L L L L L L L H L L L L L L L L L L L L L L L L H L L L L L L L
↑ ↓
www.jxlcd.com
L L L L L L H H H H L H L L L L L L L L L L L L H H H H H L L L L L L L
L L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L L L L H L
↑ ↓
L L L L L L L L L L L L H H H H L H L L L L L L L L L L L L H H H H H L
L L L L L H L L L L L H L L L L L H L L L L H L L L L L H L L L L L H L
↑ ↓
H H H H L H H H H H L H H H H H L H H H H H H L H H H H H L H H H H H L
: :
: :
: :
: :
MSB LSB G5 G 4 G3 G2 G1 G 0
: :
: :
: :
: :
MSB LSB B5 B4 B3 B2 B1 B0
: :
: :
: :
: :
Gray scale
L3…L60
L3…L60
L3…L60
L3…L60
level
-
-
-
-
-
-
-
­L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 15 / 30
Document No. DC130-004640 Revision 1.0
5.0 INTERFACE PIN CONNECTION
5.1 TFT LCD Module Interface Connector (30-pins ) (
Pin No. Signal Description
1 RinO0- Receiver Signal (-) 2 RinO0+ Receiver Signal (+) 3 RinO1- Receiver Signal (-) 4 RinO1+ Receiver Signal (+) 5 RinO2- Receiver Signal (-) 6 RinO2+ Receiver Signal (+) 7 VSS Ground 8 RinOC- Clock Signal (-) 9 RinOC+ Clock Signal (+)
10 RinO3- Receiver Signal (-)
11 RinO3+ Receiver Signal (+) 12 RinE0- Receiver Signal (-) 13 RinE0+ Receiver Signal (+) 14 VSS Ground 15 RinE1- Receiver Signal (-) 16 RinE1+ Receiver Signal (+) 17 VSS Ground 18 RinE2- Receiver Signal (-)
www.jxlcd.com
www.jxlcd.com
5.2 Back-Light Unit
CN3, 4: CCFL Power Source (BDBR-03(4.0)V-1S or equivalent) Mating connector: SM02(8.0)B-BDBS-1-TB(CF)(SN) or equivalent
Terminal No.
19 RinE2+ Receiver Signal (+) 20 RinEC- Clock Signal (-) 21 RinEC+ Clock Signal (+) 22 RinE3- Receiver Signal (-) 23 RinE3+ Receiver Signal (+) 24 VSS Ground 25 NC NC 26 NC NC 27 NC NC 28 VDD+5V Power Supply, 5V (Typical) 29 VDD+5V Power Supply, 5V (Typical) 30 VDD+5V Power Supply, 5V (Typical)
Symbol Function 1 VL CCFL power supply (high voltage) 2 NC No connection 3 GL CCFL power supply (low voltage)
HIROSE: MDF76URW-30S-1H(58) or equivalent
)
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
L7
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 16 / 30
Document No. DC130-004640 Revision 1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1
TFT LCD Module
Item Symbol
Voltage of power supply VDD 4.5 5.0 5.5 V
Current of power supply
Vsync frequency fV Hsync frequency fH Frequency f Input rush current I
Note (1)
1). White & V- Color:
www.jxlcd.com
2). Mosaic: Dot checker image
www.jxlcd.com
White
White I V-Color I Mosaic I
DD0
DD1
DD2
DCLK
Rush
Min. Typ. Max. Unit Note
310 410 510 380 480 580 510 610 710
55.935
White
Yellow
60
Purple Red
56
55.469
44.375 53.25 68.375
- -
mA (1) mA (1) mA (1)
75
70.635
3.0 A (2)
Cyan
Green Blue
Hz ref 6.5 t1
KHz ref 6.5 t4
MHz ref 6.5 t7
Black
L0: Luminance with all pixels black. L63: Luminance with all pixels white.
be disclosed, distributed or reproduced in whole or in part with Corporation.
Grey scale: L0～L63.
L0
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
+12V
GND
5.0V
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 17 / 30
Document No. DC130-004640 Revision 1.0
Note (2) Input Rush Current measurement condition
www.jxlcd.com
R1
VR
C2 C1
www.jxlcd.com
0.1VDD
0.9VDD
500us~10ms
5.0V
To LCD VDD Input
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
WHITE(Ground
RED
2
WHITE(Ground
RED
2
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 18 / 30
Document No. DC130-004640 Revision 1.0
6.2 Back-Light Unit
The back- light system is an edge-lighting type with 2 CCFL.
The characteristic of the lamp is shown in the following tables.
Item Symbol Min. Typ. Max. Unit Note Lamp current IL 3.5 7.5 8.0 mA(rms) Lamp voltage VL 589.5 Frequency fL 40 50 60 KHz (2) Operating lamp life time
Startup voltage Vs
Hr 40,000
1200 1400
655 769.5 V(rms) (6) IL=7.5mA
- -
- -
Hour (3) IL=7.5mA
(4)(5) at 25oC
V(rms)
(4)(5) at 0oC
Note (1) Lamp current is measured with current meter for high frequency as shown
below. Specified valued are for single lamp.
(1)(6)
LCD MODULE
INVERTER
www.jxlcd.com
www.jxlcd.com
1
A
1
(TDK TBD315NR-1)
A
Note (2) Lamp frequency may produce interference with horizontal synchronous
frequency and this may cause ripple noise on the display. Therefore lamp frequency shall be kept away from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference.
*
Suggest the inverter frequency avoid fL=41~49KHz
Note (3) Lamp life time (Hr) can be defined as the time in which it continues to
operate under the condition: Ta=25±3 oC, typical IL value indicated in the above table until the brightness becomes less than 50%.
Note (4) CCFL inverter should be able to provide a voltage over specified
value (Vs) in the above table. Lamp units need at least Vs value shown above to ignition.
Note (5) The voltage over specified value (Vs) should be applied to the lamp more
than 1 second after startup. Otherwise, the lamp may not be turned on. The used lamp current is the lamp typical current.
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 19 / 30
Document No. DC130-004640 Revision 1.0
Note (6) The output voltage waveform and current waveform of the inverter must be
symmetrical (Unsymmetrical ratio is less than 10%). Please do not use the inverter which has unsymmetrical voltage and current waveform, and spike waveform. The inverter design which can provide the best optical performance, power efficiency, and lamp life should under the following conditions.
a. The asymmetry rate of the inverter waveform should be less than 10%. b. The distortion tae of the waveform should be within √2±10%.
c. The inverter output waveform should be better similar to the ideal sine wave.
www.jxlcd.com
www.jxlcd.com
Asymmetry rate = |Ip-I-p| / Irms x 100% Distortion rate = Ip (or I-p) / Irms
Ip
I-p
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 20 / 30
Document No. DC130-004640 Revision 1.0
6.3.1
Switching Characteristics for LVDS Receiver
Item Symbol
Min. Typ.
Max. Unit
Conditions Differential Input High Threshold Vth Differential Input Low Threshold Vtl
Input Current I
Input Voltage Range(Signal ended) Differential input Voltage |VID| Common Mode Voltage Offset V Clock Frequency fc LVDS Skew Margin t LVDS Input Clock Jitter Tolerance
IN
V
IN
CM
RSKM
－
100
－
－ －
1.1-(|VID|)/2 100
1.1
44.375 53.25 68.375
－ －
－ － － － － － －
－ －
－
mV
-100
±10 uA VIN=1.75V,VDD=3.6V ±10 uA VIN=0.8V,VDD=3.6V
1.375+(|VID|)/2 V 600 mV
1.375 V
400 ±2.5 %
mV
MHz
pS At fc=44.375MHz
VCM=1.2V
center spread
RCLK
Rin0
Rin1
www.jxlcd.com
www.jxlcd.com
Rin2
t
RSKM
t
RSKM
LVDS Receiver skew margin
Differential Signal Diagram
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 21 / 30
Document No. DC130-004640 Revision 1.0
6.4 Bit Mapping & Interface Definition
7T
6.5/7T
5.5/7T
4.5/7T
3.5/7T
2.5/7T
1.5/7T
0.5/7T
RCLKP
Rin0
R[2]
R[1]
R[0]
G[0]
R[5]
R[4]
R[3]
R[2]
R[1]
R[0]
G[0]
Rin1
G[2]
G[1] B[1] B[0] G[5] G[4] G[3] G[2] G[1] B[1]G[3]
Rin2
www.jxlcd.com
B[4]
www.jxlcd.com
B[3] B[2] DE (VS) (HS) B[5] B[4] B[3] B[2] DE
Pervious Cycle Current Cycle
Next Cycle
Bit Mapping & Timing Definition
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
(2)Horizontal
X,898
X,900
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 22 / 30
Document No. DC130-004640 Revision 1.0
6.5 Interface Timing ( DE mode)
Item Symbol Min. Typ. Max. Unit Frame Rate Frame Period t1 910 934 1050 line Vertical Display Time t2 900 900 900 line Vertical Blanking Time t3 10 34 150 line 1 Line Scanning Time t4 800 952 968 clock Horizontal Display Time t5 720 720 720 clock Horizontal Blanking Time t6 60 232 248 clock Clock Rate t7 44.375 53.25 68.375 MHz
-- 56 60 75 Hz
Timing Diagram of Interface Signal (DE mode)
(1)Vertical
NCLK
www.jxlcd.com
www.jxlcd.com
DE
0~5
R
0~5
G
0~5
B
NCLK
DE
0~5
R
0~5
G
0~5
B
t2
t4
X,1 X,2 X,3 X,Y
t7
1234567891011
t1
t4
t5 t6
1431 1432
1433 1434
12
X,899
1435 1436
1437 1438
1439 1440
t3
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
(Recomm
e
nded)
Power On
90%
90%
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 23 / 30
Document No. DC130-004640 Revision 1.0
6.6 Power ON/OFF Sequence
Power Supply
0V
10%
T1
T2 T3
10%
Valid Signal
Signal
90%
T5
Backlight
50%
www.jxlcd.com
www.jxlcd.com
Power ON/OFF Sequence
T6
50%
Power Off
10%
90%
10% 10%
T4
Note (1) Apply the lamp volatge within the LCD operation range. When the back-light
500 usec < T1 ≤ 10 msec 0 < T2 ≤ 50 msec 0 < T3 ≤ 50 msec: 200 ms ≤ T4
Back-light:
200 ms ≤ T5 200 msec < T6
turns on before the LCD operation or the LCD truns off before the back-light
turns off. the display may momentarily become white. (2) In case of VDD = off level, please keep the level of input signal on 0 voltage. (3) T4 should be measured after the module has been fully discharged between
power off and on period.
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 24 / 30
Document No. DC130-004640 Revision 1.0
7.0 Outline dimension
7.1 Front View Outline Dimension
nit : mm
www.jxlcd.com
www.jxlcd.com
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 25 / 30
Document No. DC130-004640 Revision 1.0
BM Assembly Tolerance
| A-A’ | ≤ 1 (mm)
| B-B’ | ≤ 1 (mm)
www.jxlcd.com
www.jxlcd.com
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 26 / 30
Document No. DC130-004640 Revision 1.0
7.2 Back View Outline Dimension
www.jxlcd.com
www.jxlcd.com
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
２
３
４
５
６
７
８
９
10
11
12
13
14
15
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 27 / 30
Document No. DC130-004640 Revision 1.0
8.0 LOT MARK
8.1 Lot Mark
１
code 1,2,3,4,5,6: HannStar internal flow control code. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
Mark 1 2 3 4 5 6 7 8 9 0
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
www.jxlcd.com
www.jxlcd.com
8.2 Location of Lot Mark
(1) The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice.
HSD170MGW1
-B01
Rev: 2
RoHS
Hannstar Display Corporation
MADE IN TAIWAN
Lot mark
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 28 / 30
Document No. DC130-004640 Revision 1.0
9.0 PACKAGE SPECIFICATION
9.1
packing form
(1) Package quantity in one carton: 10 pieces.
(2) Carton size: 470 x 374 x 370
9.2
packing assembly drawings
www.jxlcd.com
www.jxlcd.com
H
(mm)
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 29 / 30
Document No. DC130-004640 Revision 1.0
10.0 GENERAL PRECAUTION
10.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.
10.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.
10.3 Breakage of LCD Panel
10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin.
10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is broken.
10.4 Electric Shock
10.4.1 Disconnect power supply before handling LCD module.
www.jxlcd.com
www.jxlcd.com
10.4.2 Do not pull or fold the CCFL cable.
10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s connector or cables in order to prevent electric shock.
10.5 Absolute Maximum Ratings and Power Protection Circuit
10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.
10.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time.
10.5.3 It’s recommended to employ protection circuit for power supply.
10.6 Operation
10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
10.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly.
10.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.
be disclosed, distributed or reproduced in whole or in part with Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD170MGW1 Specification for WEIHAI DEAWOO Page No. 30 / 30
Document No. DC130-004640 Revision 1.0
10.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading.
10.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent.
10.7 Mechanism
Please mount LCD module by using mouting holes arranged in four corners tightly.
10.8 Static Electricity
10.8.1 Protection film must remove very slowly from the surface of LCD module to prevent from electrostatic occurrence.
10.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is very
weak to electrostatic discharge. Please be careful with electrostatic discharge.
Persons who handle the module should be grounded through adequate methods.
10.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
10.10 Disposal
When disposing LCD module, obey the local environmental regulations.
www.jxlcd.com
www.jxlcd.com
be disclosed, distributed or reproduced in whole or in part with Corporation.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use