How it Works
HannStar
Loading...
HSD170MGW1-B00
Specification
30 pgs938.79 Kb0

HannStar HSD170MGW1-B00 Specification

Download
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 1 / 30
Document No. Revision 1.0
TO : Roadwell
Date : June 05, 2008
Customer Acceptance Specifications
www.panelook.com
Model : HSD170MGW
-B00
࣬ᜢЎҹǺ
Accepted by:
Proposed by: Technical Service Division
Signature Date
Signature Date
Note:
1. The information contained herein is tentative and may be changed without prior notices.
2. Please contact HannStar Display Corp. before designing your product based on this module specification.
3. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual propertyclaims or other problems that may result from application based on the module described herein.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 2 / 30
Document No. Revision 1.0
Rev. Date Sub-Model Description of change
www.panelook.com
Record of Revisions
1.0
June.05, 2008
B00
HSD170MGW1 Specification was first issued.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 3 / 30
Document No. Revision 1.0
1.0 General description ……………………………….… p.4
2.0 Absolute maximum ratings …………………………. p.6
3.0 Optical characteristics ………………………………. p.8
www.panelook.com
Contents
4.0 Block diagram …………………………….. ……….. p.12
5.0 Interface pin connection ……………………………. p.15
6.0 Electrical characteristics ……………………………. p.16
7.0 Outline dimension …………………………………… p.24
8.0 Lot mark …………………………….………………… p.27
9.0 Package specification ………………………………. p.28
10.0 General precaution ………………………………….. p.29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 4 / 30
Document No. Revision 1.0
1.0 GENERAL DESCRIPTION
1.1 Introduction
HannStar Display model HSD170MGW1-B is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 17.0 inch diagonally measured active display area with XGA resolution (900 vertical by 1440 horizontal pixel array) and can display up to
16.2M (6-bit+FRC)colors.
1.2 Features
17.0 WXGA+ for Monitor application High Resolution: 1440*900 2-ch LVDS interface system LCD Timing Controller Wide Viewing Angle RoHS compatible
1.3 Applications
Desktop Monitor Display terminals for AV applications
Display terminals for industrial applications
1.4 General information
Item Specification Unit Outline Dimension 389.2 x 254.5 x 11.7 (Typ) mm Display area 367.2 (H) x 229.5 (V) mm Number of Pixel 1440(H) x 900(V) pixels Pixel pitch 0.255(H) x 0.255(V) mm Pixel arrangement RGB Vertical stripe Display color 16.2M (6-bit+FRC) colors Color Gamut 63% NTSC Display mode Normally white Surface treatment Antiglare (3H) Weight 1365 g Back-light 2-CCFLs, Top & bottom edge side Input signal 2-ch LVDS
Power Consumption
www.panelook.com
Logic System 3.0(TYP.) W B/L System 11.76(TYP.) W
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 5 / 30
Document No. Revision 1.0
1.5 Mechanical Information
Item Min. Typ. Max. Unit
Horizontal (H) 388.7 389.2 389.7 mm
Module
Size
Vertical (V) 254.0 254.5 255.0 mm
Depth (D) Weight (Without inverter) Torque of customer screw hole
www.panelook.com
11.4 11.7
-
- - 3.0
12.0 mm
1365 - g
Kgf•Cm
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 6 / 30
Document No. Revision 1.0
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item Symbol Min. Max. Unit Note Storage temperature T Operating temperature T
Vibration (non-operating) V
www.panelook.com
-20 60 oC
STG
0 50 oC (1)
OPR
NOP
Ё
1.5 G (2)
Shock (non-operating) S
Storage humidity H
NOP
10 90 %RH (3)
STG
Ё
70 G (3)
Operating humidity HOP 10 90 %RH (4)
Low pressure (operating) P
Low pressure (non-operating) P
697
LOP
116
LNOP
Ё
Ё
hPa (5)
hPa (6)
Note (1) Storage / Operating temperature
Humidity (%)
-20-40
(2) 5-500-5Hz sine wave, X, Y, Z each directions, 30min/cycle.
100
90
80
60
40
Storage Range
20
10
0
0
Temperature (
Operating Range
20 40
o
C)
50
60
(3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test, it is
necessary to fill the silicon rubber between the shock jig as buffer. (4) Max wet bulb temp.= 39oC (5) 2hrs. (10000 feet) (6) 24hrs. (50000 feet)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 7 / 30
Document No. Revision 1.0
2.2 Electrical Absolute Rating
2.2.1 TFT LCD Module
Item Symbol Min. Max. Unit Note Power supply voltage VDD -0.3 6.0 V (1) (2) Logic input voltage VIN -0.3 VDD+0.3 V (1) (2)
2.2.2 Back-Light Unit
Item Symbol Min. Max. Unit Note Lamp current IL 3.5 8.0 mA (1) (2) Lamp frequency fL 40 60 KHz (1) (2)
Note(1)Permanent damage may occur to the LCD module if beyond this specification.
functional operation should be restricted to the conditions described under normal operating conditions.
(2) Ta =25±2к
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 8 / 30
Document No. Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
www.panelook.com
Contrast CR
Response time
Rising TR - 1.5
Falling TF -
White luminance (Center)
Color chromaticity
Red
Green
YL 200 250 - cd/m2
Ә=0
Rx
Ry
Gx
Gy
viewing
angle
-
-
(CIE1931)
Blue
Bx
By
Wx 0.283 0.313 0.343
White
Wy
ӘL
Viewing angle
Hor.
Ver.
Ә
R
ӘD
CR>10
ӘU
ӘL
Viewing angle
Hor.
Ver.
ӘR
ӘD
Ә
U
CR>5
500 600
- (1)(2)
3
msec (1)(3)
3.5 7
(1)(4)(5)
(IL=7.5mA)
0.621 0.651 0.681
0.302 0.332 0.362
0.288 0.318 0.348
0.539 0.569 0.599
0.117 0.147 0.177
0.061 0.091 0.121 (1)(4)
0.299 0.329 0.359
70
70
75
55
75
75 85 -
75 85
75 85
80 -
80 -
85
65
-
-
85 -
-
-
Brightness uniformity B
UNI
Ә=0
70 75 - % (6)
3.2 Measuring Condition
Measuring surrounding: dark room Lamp current IBL: 7.5±0.1mA, lamp freq. FL=50 KHz, Inverter: TDK TBD315NR-1  VDD=5.0V, fV=60Hz  Ambient temperature: 25±2oC  30min. Warm-up time.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 9 / 30
Document No. Revision 1.0
3.3 Measuring Equipment
FPM520 of Westar Electric Corp., which utilized SR-3 for Chromaticity and BM-5A
for other optical characteristics.
Measuring spot size: 20~21mm
Note (1) Definition of Viewing Angle:
ӥ=180o
Note (2) Definition of Contrast Ratio (CR): measured at the center point of panel
Luminance with all pixels white (L63) CR = Luminance with all pixels black (L0)
ӘL
6’ o’clock ӥ=270
www.panelook.com
ӘU
12’ o’clock
ӥ=90
Ә
ӘD
o
o
R
ӥ=0o
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 10 / 30
Document No. Revision 1.0
Note (3) Definition of Response Time: Sum of TR and TF
white(TFT OFF) black (TFT ON) white(TFT OFF)
100%
90%
Optical
response
10%
0%
Note (4) Optical characteristic measurement setup
LCD Panel
www.panelook.com
T
R
120cm
Field = 1
T
F
o
Photo-detector (BM-5A)
time
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 11 / 30
Document No. Revision 1.0
Note (5) Definition of Average Luminance of White
Center Luminance =
www.panelook.com
Y
1
1/10V
1/10V
1/10 H
1/2H
Y1
Note (6) Definition of brightness uniformity
1/10H
1/2V
(Min Luminance of 9 points)
Luminance uniformity = 100%
(Max Luminance of 9 points)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 12 / 30
Document No. Revision 1.0
4.0 BLOCK DIAGRAM
4.1 TFT LCD Module
www.panelook.com
X-driver IC
Connector CN1
Converter
TCON with
LVDS receiver
DC/DC
Y-driver IC
Liquid Crystal Panel
1440900 pixels
Gamma
Reference
Voltage
Generator
4.2 Back Light Unit
2 Cold1 1 Hot 1
CN3
CN4
1 Hot 2 2 Cold 2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 13 / 30
Document No. Revision 1.0
4.3 Pixel Format
1,1
1,2
1,3
(odd)
(even)
(odd)
1,4
(even)
www.panelook.com
1,1440
2,1
(odd)
900,1
LCD Display Area
1 Pixel
R BG
R
1440Pixels
900 Lines
R
900,
1440
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 14 / 30
Document No. Revision 1.0
4.4 Relationship Between Displayed Color and Input
Basic color
Gray scale of Red
Gray scale of Green
Gray scale of Blue
Gray scale of White & Black
Display
Black LLLLLLLLLLLLLLLLLL -
Blue LLLLLLLLLLLLHHHHHH -
Green L L L L L L H H H H H H L L L L L L -
Light Blue L L L L L L H H H H H H H H H H H H -
Red HHHHHHLLLLLLLLLLLL - Purple H H H H H H L L L L L L H H H H H H ­Yellow H H H H H H H H H H H H L L L L L L -
White HHHHHHHHHHHHHHHHHH -
Black LLLLLLLLLLLLLLLLLL L0
Dark
Light
Red H H H H H H L L L L L L L L L L L L Red L63
Black LLLLLLLLLLLLLLLLLL L0
Dark
Light
Green L L L L L L H H H H H H L L L L L L Green L63
Black LLLLLLLLLLLLLLLLLL L0
Dark
Light
Blue L L L L L L L L L L L L H H H H H H Blue L63
Black LLLLLLLLLLLLLLLLLL L0
Dark
Light
White H H H H H H H H H H H H H H H H H H White L63
MSB LSB R5 R4 R3 R2 R1 R0
LLLLLHLLLLLLLLLLLL L1 LLLLHLLLLLLLLLLLLL L2
 
H H H H L H L L L L L L L L L L L L L61 H H H H H L L L L L L L L L L L L L L62
LLLLLLLLLLLHLLLLLL L1 LLLLLLLLLLHLLLLLLL L2
 
L L L L L L H H H H L H L L L L L L L61 L L L L L L H H H H H L L L L L L L L62
LLLLLLLLLLLLLLLLLH L1 LLLLLLLLLLLLLLLLHL L2
 
L L L L L L L L L L L L H H H H L H L61 L L L L L L L L L L L L H H H H H L L62
LLLLLHLLLLLHLLLLLH L1 LLLLHLLLLLHLLLLLHL L2
 
H H H H L H H H H H L H H H H H L H L61 H H H H H L H H H H H L H H H H H L L62
www.panelook.com
MSB LSB G5 G4 G3 G2G1 G0
: :
: :
: :
: :
: :
: :
: :
: :
MSB LSB B5 B4 B3 B2 B1 B0
: :
: :
: :
: :
Gray scale
level
L3…L60
L3…L60
L3…L60
L3…L60
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 15 / 30
Document No. Revision 1.0
5.0 INTERFACE PIN CONNECTION
5.1 TFT LCD Module
Interface Connector (30-pins ) (HIROSE: MDF76URW-30S-1H(58) or equivalent)
Pin No. Signal Description
1 RinO0- Receiver Signal (-) 2 RinO0+ Receiver Signal (+) 3 RinO1- Receiver Signal (-) 4 RinO1+ Receiver Signal (+) 5 RinO2- Receiver Signal (-) 6 RinO2+ Receiver Signal (+) 7 VSS Ground 8 RinOC- Clock Signal (-) 9 RinOC+ Clock Signal (+)
10 RinO3- Receiver Signal (-)
11 RinO3+ Receiver Signal (+) 12 RinE0- Receiver Signal (-) 13 RinE0+ Receiver Signal (+) 14 VSS Ground 15 RinE1- Receiver Signal (-) 16 RinE1+ Receiver Signal (+) 17 VSS Ground 18 RinE2- Receiver Signal (-) 19 RinE2+ Receiver Signal (+) 20 RinEC- Clock Signal (-) 21 RinEC+ Clock Signal (+) 22 RinE3- Receiver Signal (-) 23 RinE3+ Receiver Signal (+) 24 VSS Ground 25 NC NC 26 NC NC 27 NC NC 28 VDD+5V Power Supply, 5V (Typical) 29 VDD+5V Power Supply, 5V (Typical) 30 VDD+5V Power Supply, 5V (Typical)
www.panelook.com
5.2 Back-Light Unit
CN3, 4: CCFL Power Source (BDBR-03(4.0)V-1S or equivalent)
Mating connector: SM02(8.0)B-BDBS-1-TB(CF)(SN) or equivalent
Terminal No. Symbol Function
1 VL CCFL power supply (high voltage) 2 NC No connection
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
3 GL CCFL power supply (low voltage)
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 16 / 30
Document No. Revision 1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module
Item Symbol Min. Typ. Max. Unit Note
Voltage of power supply VDD 4.5 5.0 5.5 V
www.panelook.com
Current of power supply
White I
V-Color I
Mosaic I
DD0
DD1
DD2
Vsync frequency fV Hsync frequency fH Frequency f Input rush current I
DCLK
Rush
Note (1)
1). White & V- Color:
White
2). Mosaic: Dot checker image
310 410 510
380 480 580
510 610 710
56
55.469
44.375 53.25 68.375
- -
60
55.935
White
Yellow
Purple
70.635
Red
mA (1)
mA (1)
mA (1)
75
Hz ref 6.5 t1
KHz ref 6.5 t4
MHz ref 6.5 t7
3.0 A (2)
Cyan
Green
Blue
Black
L7
Grey scale: L0ДL63.
L0: Luminance with all pixels black. L63: Luminance with all pixels white.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
L0
www.panelook.com
Global LCD Panel Exchange Center
V
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 17 / 30
Document No. Revision 1.0
Note (2) Input Rush Current measurement condition
+12V
R1
GND
0.1VDD
VR
0.9VDD
www.panelook.com
5.0V
C2 C1
5.0
500us~10ms
To LCD VDD Input
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 18 / 30
Document No. Revision 1.0
6.2 Back-Light Unit
The back- light system is an edge-lighting type with 2 CCFL.
The characteristic of the lamp is shown in the following tables. Item Symbol Min. Typ. Max. Unit Note Lamp current IL 3.0 7.5 8.0 mA(rms) (1)(6) Lamp voltage VL 589.5 655 769.5 V(rms) (6) IL=7.5mA Frequency fL 40 50 60 KHz (2) Operating lamp life
time
Startup voltage Vs
Note (1) Lamp current is measured with current meter for high frequency as shown
below. Specified valued are for single lamp.
www.panelook.com
Hr 40,000
1200 (4)(5) at 25oC 1400
- -
- -
Hour (3) IL=7.5mA
V(rms)
(4)(5) at 0oC
LCD MODULE
RED
WHITE(Ground
RED
WHITE(Ground
1 2
1 2
A
A
INVERTER
(TDK TBD315NR-1)
Note (2) Lamp frequency may produce interference with horizontal synchronous
frequency and this may cause ripple noise on the display. Therefore lamp frequency shall be kept away from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference.
*Suggest the inverter frequency avoid fL=41~49KHz
Note (3) Lamp life time (Hr) can be defined as the time in which it continues to
operate under the condition: Ta=25±3 oC, typical IL value indicated in the above table until the brightness becomes less than 50%.
Note (4) CCFL inverter should be able to provide a voltage over specified
value (Vs) in the above table. Lamp units need at least Vs value shown above to ignition.
Note (5) The voltage over specified value (Vs) should be applied to the lamp more
than 1 second after startup. Otherwise, the lamp may not be turned on. The used lamp current is the lamp typical current.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 19 / 30
Document No. Revision 1.0
Note (6) The output voltage waveform and current waveform of the inverter must be
symmetrical (Unsymmetrical ratio is less than 10%). Please do not use the inverter which has unsymmetrical voltage and current waveform, and spike waveform. The inverter design which can provide the best optical performance, power efficiency, and lamp life should under the following conditions.
a. The asymmetry rate of the inverter waveform should be less than 10%. b. The distortion tae of the waveform should be within Ѕ2±10%. c. The inverter output waveform should be better similar to the ideal sine
wave.
Asymmetry rate = |Ip-I-p| / Irms x 100% Distortion rate = Ip (or I-p) / Irms
www.panelook.com
Ip
I-p
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 20 / 30
Document No. Revision 1.0
6.3 Switching Characteristics for LVDS Receiver
Item Symbol Min. Typ. Max. Unit Conditions
Differential Input High Threshold
Differential Input Low Threshold
Input Current I
Input Voltage Range(Signal ended)
www.panelook.com
Vth
Vtl Ё
IN
V
IN
100
Ё Ё
Ё Ё
1.1-(|VID|)/2
Ё
Ё
1.375+(|VID|)/2 V
Ё
Ё mV
-100
±10 uA
±10 uA V
mV
=1.75V,VDD=3.6
V
IN
V
=0.8V,VDD=3.6V
IN
V
=1.2V
CM
Differential input Voltage |VID| 250
Common Mode Voltage Offset
V
1.1
CM
Clock Frequency fc
LVDS Skew Margin t
LVDS Input Clock Jitter Tolerance
RSKM
Ё Ё Ё
RCLK
Rin0
Rin1
Rin2
t
RSKM
t
RSKM
LVDS Receiver skew margin
Ё
Ё
450 mV
1.375 V
44.375 53.25 68.375
Ё Ё
400
±2.5 % center spread
MHz
pS At fc=44.375MHz
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 21 / 30
Document No. Revision 1.0
6.4 Bit Mapping & Interface Definition
7T
6.5/7T
5.5/7T
4.5/7T
3.5/7T
2.5/7T
1.5/7T
0.5/7T
www.panelook.com
RCLKP
Rin0
R[2]
R[1] R[0] G[0] R[5] R[4] R[3] R[2] R[1] R[0] G[0]
Rin1
G[2]
G[1] B[1] B[0] G[5] G[4] G[3] G[2] G[1] B[1]G[3]
Rin2
B[4]
B[3] B[2] DE (VS) (HS) B[5] B[4] B[3] B[2] DE
Pervious Cycle Current Cycle
Next Cycle
Bit Mapping & Timing Definition
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
(2)
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 22 / 30
Document No. Revision 1.0
6.5 Interface Timing ( DE mode)
Item Symbol Min. Typ. Max. Unit Frame Rate -- 56 60 75 Hz Frame Period t1 910 934 1050 line Vertical Display Time t2 900 900 900 line Vertical Blanking Time t3 10 34 150 line 1 Line Scanning Time t4 800 952 968 clock Horizontal Display Time t5 720 720 720 clock Horizontal Blanking Time t6 60 232 248 clock Clock Rate t7 44.375 53.25 68.375 MHz
www.panelook.com
Timing Diagram of Interface Signal (DE mode)
(1)Vertical
NCLK
DE
0~5
R
0~5
G
0~5
B
Horizontal
NCLK
DE
0~5
R
0~5
G
0~5
B
t2
t4
X,1 X,2 X,3 X,Y
t7
1234567891011
t1
X,898
t4
t5 t6
1431 1432
1433 1434
12
X,899
1435 1436
1437 1438
X,900
1439 1440
t3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
(
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 23 / 30
Document No. Revision 1.0
6.6 Power ON/OFF Sequence
www.panelook.com
Power On
Power Supply
90%
10%
0V
Signal
Backlight
Recommended)
T1
T2 T3
10% 10%
90% 90%
Valid Signal
T5 T6
50%
50%
Power ON/OFF Sequence
Power Off
90%
10% 10%
T4
Note (1) Apply the lamp volatge within the LCD operation range. When the back-light
(2) In case of VDD = off level, please keep the level of input signal on 0 voltage.
(3) T4 should be measured after the module has been fully discharged between
500 usec < T1  10 msec
0 < T2  50 msec
0 < T3  50 msec:
Back-light:
200 ms  T5
200 msec < T6
200 ms  T4
turns on before the LCD operation or the LCD truns off before the back-light
turns off. the display may momentarily become white.
power off and on period.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 24 / 30
Document No. Revision 1.0
7.0 OUTLINE DIMENSION
7.1 Front View Outline Dimension
www.panelook.com
Unit : mm
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 25 / 30
Document No. Revision 1.0
BM Assembly
Tolerance
| A-A’ |  1 (mm)
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 26 / 30
Document No. Revision 1.0
7.2 Back View Outline Dimension
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 27 / 30
Document No. Revision 1.0
8.0 LOT MARK
8.1 Lot Mark
www.panelook.com
˞ ˟ ˠ ˡ ˢ ˣˤ˥˦
10 11 12 13 14 15
code 1,2,3,4,5,6: HannStar internal flow control code. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008
Mark 9 0 1 2 3 4 5 6 7 8
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
8.2 Location of Lot Mark
(1) The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice.
HSD170MGW1
-B00
Hannstar Display Corporation
MADE IN TAIWAN
Rev:
RoHS
Lot mark
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 28 / 30
Document No. Revision 1.0
9.0 PACKAGE SPECIFICATION
9.1 packing form
(1) Package quantity in one carton: 10 pieces.
(2) Carton size: 470 x 374 x 370H (mm)
9.2 packing assembly drawings
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 29 / 30
Document No. Revision 1.0
10.0 GENERAL PRECAUTION
10.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.
10.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.
10.3 Breakage of LCD Panel
10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin.
10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is broken.
10.4 Electric Shock
10.4.1 Disconnect power supply before handling LCD module.
10.4.2 Do not pull or fold the CCFL cable.
10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s connector or cables in order to prevent electric shock.
10.5 Absolute Maximum Ratings and Power Protection Circuit
10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.
10.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time.
10.5.3 It’s recommended to employ protection circuit for power supply.
10.6 Operation
10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead. Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly.
10.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.
10.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading.
10.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzene or other adequate solvent.
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD170MGW1 Specification for Roadwell Page No. 30 / 30
Document No. Revision 1.0
10.7 Mechanism
Please mount LCD module by using mouting holes arranged in four corners tightly.
10.8 Static Electricity
10.8.1 Protection film must remove very slowly from the surface of LCD module to prevent from electrostatic occurrence.
10.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge.Persons who handle the module should be grounded through adequate methods.
www.panelook.com
10.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,display characteristics may be changed.
10.10 Disposal
When disposing LCD module, obey the local environmental regulations.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use