HannStar HSD150SX89-A00 Specification

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 1 / 32

Document No. Revision 1.0

To : Date : Apr.08.2003

Hannstar Product Information

Model : HSD150SX89

- A

Note: 1. Please contact HannStar Display Corp. before designing your product based on this module

specification.

2. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that

may result from application based on the module described herein.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 2 / 32

Document No. Revision 1.0

Record of Revisions

Rev. Updated No. Date Description of change

01 ─ May.06.2003 Product information of HSD150SX89-A was first

issued.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 3 / 32

Document No. Revision 1.0

Contents

1.0 General descriptions ……………………………….… p.4

2.0 Absolute maximum ratings ………………………….. p.5

3.0 Optical characteristics ……………………………….. p.7

4.0 Block diagram ………………………………………… p.12

5.0 I/O Connection Pin assignment ……………………….. p.15

6.0 Electrical Characteristics ………………….…………. p.17

7.0 Outline dimension …………………………….……… p.26

8.0 Lot Mark ……………………………………………….. p.28

9.0 Package Specification ……………………………...… P.29

10.0 General precaution ………………………………….. p.31

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 4 / 32

Document No. Revision 1.0

1.0 GENERAL DESCRIPTIONS

1.1 Introduction

HannStar Display model HSD150SX89-A is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, the voltage reference, common voltage, DC-DC converter, column, and row driver circuit. This TFT LCD has a 15-inch diagonally measured active display area with XGA resolution (768 vertical by 1024 horizontal pixel array).

1.2 Features

■ 15” XGA TFT LCD panel

■ 4 CCFLs Backlight system

■ Supported XGA (V:768 lines, H:1024 pixels) resolution

■ Supported to 75Hz refresh rate

■ Without LCD Timing Controller

1.3 General information

Item Specification Unit Outline dimension 331.6× 255.5× 14.1(typ.) mm Display area 304.1(H) x 228.1(V) (15.0” diagonal) mm Number of Pixel 1024(H) x 768(V) Pixels Pixel pitch 0.297(H) x 0.297(V) mm Pixel arrangement RGB Vertical stripe Display color 6-bits driver Display mode Normally white Surface treatment Antiglare, Hard-Coating(3H)

Weight 1180(typ.) g Back-light 4-CCFLs, Top & bottom edge side

Input signal Source and Gate Driver control signals Power consumption 18 W(typ.), with back light W Optimum viewing

direction

6 o’clock

1.4 Applications

■ Desktop monitors

■ Display terminals for AV applications

■ Monitors for industrial applications

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 5 / 32

Document No. Revision 1.0

1.5 Mechanical Information

Item Min. Typ. Max. Unit

Horizontal(H) 331.1 331.6 332.1 mm

Vertical(V) 255.0 255.5 256.0 mmModule Size

Depth(D) -- 14.1 14.6 mm

Weight (without inverter) -- 1180 -- g

2.0 ABSOLUTE MAXIMUM RATINGS

2.1 Absolute Rating of Environment

Item Symbol Min. Max. Unit Note Storage temperature T Operating temperature T Vibration(non-operating) V Shock(non-operating) S Storage humidity H Operating humidity H Low pressure(operating) P Low pressure(non-operating) P

STG

OPR

NOP

STG

OP

LOP

LNOP

-20 60 050oC

-- 1.5 G (1)

-- 70 G (2)

10 90 %RH (3)

10 80 %RH (3) 697 -- HPa (4) 116 -- HPa (5)

o

C

Note (1) 5-500-5Hz sine wave, X,Y,Z each directions, 30 min/cycle.

(2) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test,

it is necessary to fill the silicon rubber between the shock jig as buffer.

(3) Max wet bulb temp. =39

o

C (4) 2 hrs. (10000 feet) (5) 24hrs. (50000 feet)

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 6 / 32

Document No. Revision 1.0

Humidity (%)

100

90

80

2.2 Electrical Absolute Rating:

2.2.1 TFT LCD Module:

Item Symbol Condition

Input Power Voltage

Logic Signal input voltage

2.2.2 Back Light Unit:

V

Item Symbol Min. Max. Unit Note

Storage Range

-20-40

DD

SIG

60

40

20

10

0

Operating Range

0

Temperature (

20 40 60

o

C)

Normal

Normal -0.3

50

Value Unit

min. max.

+3.0 +3.8

+0.3

V

DD

65

V(DC)

V

Lamp voltage

Lamp current

Lamp frequency f

V

L

I

L

0 2000 V(rms) (1)

－

7.0 mA (1)

0 100 KHz (1)

Note: (1) Permanent damage may occur to the LCD module if beyond this specification.

Functional operation should be restricted to the conditions described under Normal Operating Conditions.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 7 / 32

Document No. Revision 1.0

3.0 OPTICAL CHARACTERISTICS

3.1 Measuring Condition

■ Measuring surrounding : dark room

■ Lamp current I

■ V

=3.3V, fV=60Hz, f

DD1

■ Surrounding temperature : 25±2

■ 30min. Warm-up time.

3.2 Measuring Equipment

■ LCD-7000 of Otsuka Electric Corp., which utilized MCPD-7000 for Chromaticity and BM-5A for other optical characteristics.

■ Measuring spot size : 10~12mm

3.3 Optical specification

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast CR 400 500 -- (1)(2) Response time White luminance

(center of screen)

Color chromaticity (CIE1931)

Viewing angle

Brightness uniformity B Crosstalk CT(n)

: (6.5)±0.1mA, lamp freq. FL=50 KHz

BL

=32.5MHz

DCLK

o

C

Rising

TR +TF -- 16 26 msec (1)(3)

Falling

400 500 cd/m

o

0.616 0.646 0.676

0.310 0.340 0.370

0.247 0.277 0.307

0.574 0.604 0.634

0.111 0.141 0.171

Red

Green

Y

Rx Ry Gx Gy Bx

L

Θ=0

o

φ=0

Normal viewing

angle

Blue

By

Wx

0.036 0.076 0.106

0.280 0.310 0.340

White

0.297 0.327 0.357

-- 75 --

-- 70 --

-- 65 --

-- 80 --

-- 75 --

o

-- 75 -- % (5)

-- 1.3 -- % (6)

Hor.

Ver.

Hor.

Ver.

Wy

Θ Θ Θ

Θ

Θ Θ Θ

Θ

UNI

L

R

CR>10

H

L

R

H

L

CR>5

Θ=0

o

φ=0

2

(1)(4)

(1)

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 8 / 32

Document No. Revision 1.0

Note (1) Definition of Viewing Angle:

Φ

H

12’ o’clock

o

R

Θ

ΦH=90

L

Θ

ΘL=90

o

Φ

L

6’ o’clock

ΦL=90

Note (2) Definition of Contrast Ratio(CR) :

measured at the center point of panel

Luminance with all pixels white (L63)

CR =

Luminance with all pixels black (L0)

o

ΘR=90

o

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 9 / 32

Document No. Revision 1.0

Note (3) Definition of Response Time: Sum of TR and T

white(TFT OFF) black (TFT ON) white(TFT OFF)

R

T

100%

90%

Optical response

10% 0%

Note (4) Optical characteristic measurement setup

F

T

Photo-detector (BM-5A)

time

Field=2

o

50cm

LCD panel

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 10 / 32

Document No. Revision 1.0

Note (5) Definition of brightness uniformity

Luminance uniformity =(Min Luminance)/(Max Luminance) x 100%

10 mm

256 512 768

10 mm

192

384

576

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

－

V

－

H

－

(3)

－

V

－

H

－

(3)

－

Document Title HSD150SX89 Product Information Page No. 11 / 32

Document No. Revision 1.0

Note (6) Definition of crosstalk CT (1) ~ CT (4)

L (n) – LB (n)

CT(n) = x 100% , n = 1 ~ 4

L (n)

Where L(n) = Luminance of point “n” at pattern A (cd/m LB(n) = Luminance of point “n” at pattern B (cd/m

2

) , n=1∼4

2

) , n=1∼4

The location measured will be exactly the same in both patterns.

L0: Luminance with all pixels black

L63: Luminance with all pixels white

Gray scale: L31

1

1 4

V

8

V

L(1)

Gray scale: L0

1

－

1

4

V

8

V

L(4)

L

1

V

2

1

V

1

4

V

8

1

H

8

1

－

4

L(2)

1 8

1

H

1

H

2

H

4

1

－

V

2

1

－

V

1

4

V

8

1 8

Gray scale: L31

LB(1)

LB

LB(2)

H

1

－

H

4

1

H

2

LB(4)

1 8

1 4

H

Pattern A Pattern B

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 12 / 32

Document No. Revision 1.0

4.0 BLOCK DIAGRAM

4.1 LCD Module Block Diagram:

X-Y FPC

(LCM Internal connector)

Interface

Connector

(J2)

Interface

Connector

(J1)

X-PCB

Gate

Drivers

Y-PCB

X-Y

Connector

40

Voltage

140

DC-DC

1

Reference

Circuit

LCD Panel

768 lines x 1024 pixels

Common

Voltage

Circuit

Source

Drivers

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 13 / 32

Document No. Revision 1.0

4.2 Pixel Format

1st Pixel 2nd Pixel 3rd Pixel 4th Pixel 5th Pixel 6th Pixel 1024th Pixel

1st Line

2nd Line

3rd Line

4th Line

5th Line

6th Line

768th Line

R G B R G B R G B R G B R G B R G B R G B

R G B R G B R G B R G B R G B R G B

R G B R G B R G B R G B R G B

R G B R G B R G B R G B

R G B R G B R G B

R G B R G B

R G B R G B R G B R G B R G B

R G B R G B R G B

R G B R G B R G B R G B

R G B

R G B R G B

LCD Display Area

1 Pixel =

R G B R G B R G B R G B R G B R G B R G B

1024 Pixels

R G B

768 Lines

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 14 / 32

Document No. Revision 1.0

4.3 Relationship between Displayed Color and Input Data

Basic

color

Gray scale

of

Red

Gray scale

of

Green

Gray scale

of

Blue

Gray scale

of

White

and

Black

Display

BlackLLLLLLLLLLLLLLLLLL -

Blue LLLLLLLLLLLLHHHHHH -

GreenLLLLLLHHHHHHLLLLLL -

Light BlueLLLLLLHHHHHHHHHHHH -

Red HHHHHHLLLLLLLLLLLL -

PurpleHHHHHHLLLLLLHHHHHH -

YellowHHHHHHHHHHHHLLLLLL -

White HHHHHHHHHHHHHHHHHH -

BlackLLLLLLLLLLLLLLLLLL L0

Dark

Light

Red HHHHHHLLLLLLLLLLLLRed L63

BlackLLLLLLLLLLLLLLLLLL L0

Dark

Light

GreenLLLLLLHHHHHHLLLLLLGreen L63

BlackLLLLLLLLLLLLLLLLLL L0

Dark

Light

Blue LLLLLLLLLLLLHHHHHHBlue L63

BlackLLLLLLLLLLLLLLLLLL L0

Dark

Light

White HHHHHHHHHHHHHHHHHHWhite L63

MSB LSB R5 R4 R3 R2 R1 R0

LLLLLHLLLLLLLLLLLL L1 LLLLHLLLLLLLLLLLLL L2

↑ ↓

HHHHLHLLLLLLLLLLLL L61 HHHHHLLLLLLLLLLLLL L62

LLLLLLLLLLLHLLLLLL L1 LLLLLLLLLLHLLLLLLL L2

↑ ↓

LLLLLLHHHHLHLLLLLL L61 LLLLLLHHHHHLLLLLLL L62

LLLLLLLLLLLLLLLLLH L1 LLLLLLLLLLLLLLLLHL L2

↑ ↓

LLLLLLLLLLLLHHHHLH L61 LLLLLLLLLLLLHHHHHL L62

LLLLLHLLLLLHLLLLLH L1 LLLLHLLLLLHLLLLLHL L2

↑ ↓

HHHHLHHHHHLHHHHHLH L61 HHHHHLHHHHHLHHHHHL L62

: :

MSB LSB G5 G4 G3 G2G1 G0

: :

MSB LSB B5 B4 B3 B2 B1 B0

: :

Gray scale

level

L3…L60

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 15 / 32

Document No. Revision 1.0

5.0 I/O CONNECTION PIN ASSIGNMENT

5.1 Interface FPC Connector (40-pins x 2) (Hirose: FH12-40S-0.5SH)

I/F FRC Connector (J1) I/F FRC Connector (J2)

Symbol Description

No.

1

NC No Connecting

2

NC No Connecting

3

GND Ground

4

GND Ground

5

EB5 Even-dot Blue Data bit 5 (MSB)

6

EB4 Even-dot Blue Data bit 4

7

EB3 Even-dot Blue Data bit 3

8

EB2 Even-dot Blue Data bit 2

9

EB1 Even-dot Blue Data bit 1

10

EB0 Even-dot Blue Data bit 0 (LSB)

11

GND Ground

12

EG5 Even-dot Green Data bit 5 (MSB)

13

EG4 Even-dot Green Data bit 4

14

EG3 Even-dot Green Data bit 3

15

EG2 Even-dot Green Data bit 2

16

EG1 Even-dot Green Data bit 1

17

EG0 Even-dot Green Data bit 0 (LSB)

18

GND Ground

19

ER5 Even-dot Red Data bit 5 (MSB)

20

ER4 Even-dot Red Data bit 4

21

ER3 Even-dot Red Data bit 3

22

ER2 Even-dot Red Data bit 2

23

ER1 Even-dot Red Data bit 1

24

ER0 Even-dot Red Data bit 0 (LSB)

25

GND Ground

26

CPH1 Pixel Clock Input

27

GND Ground

28

GND Ground

29

STH Horizontal Start Pulse

30

LOAD Source Driver Latch Pulse

31

POL Source Driver Output Polarity control

32

REV Data Reverse Control Signal

33

GND Ground

34

GND Ground

35

STV1 Vertical Start Pulse 1

36

STV2 Vertical Start Pulse 2

37

CPV Vertical Clock Input

38

OE Gate Driver Output Enable Signal

39

GND Ground

40

GND Ground

Symbol Description

No.

1

VDD Digital Power Input (DC +3.3V)

2

VDD Digital Power Input (DC +3.3V)

3

GND Ground

4

GND Ground

5

OB5 Odd-dot Blue Data bit 5 (MSB)

6

OB4 Odd-dot Blue Data bit 4

7

OB3 Odd-dot Blue Data bit 3

8

OB2 Odd-dot Blue Data bit 2

9

OB1 Odd-dot Blue Data bit 1

10

OB0 Odd-dot Blue Data bit 0 (LSB)

11

GND Ground

12

OG5 Odd-dot Green Data bit 5 (MSB)

13

OG4 Odd-dot Green Data bit 4

14

OG3 Odd-dot Green Data bit 3

15

OG2 Odd-dot Green Data bit 2

16

OG1 Odd-dot Green Data bit 1

17

OG0 Odd-dot Green Data bit 0 (LSB)

18

GND Ground

19

OR5 Odd-dot Red Data bit 5 (MSB)

20

OR4 Odd-dot Red Data bit 4

21

OR3 Odd-dot Red Data bit 3

22

OR2 Odd-dot Red Data bit 2

23

OR1 Odd-dot Red Data bit 1

24

OR0 Odd-dot Red Data bit 0 (LSB)

25

GND Ground

26

CPH2 Pixel Clock Input

27

GND Ground

28

GND Ground

29

NC No Connecting

30

NC No Connecting

31

VGH Voltage gate high

32

NC No Connecting

33

VGL Voltage gate low

34

NC No Connecting

35

VGC Voltage gate common

36

NC No Connecting

37

NC No Connecting

38

NC No Connecting

39

GND Ground

40

GND Ground

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 16 / 32

Document No. Revision 1.0

5.2

Back Light Unit (CCFL) Connectors:

1 2 3 4

CCFL Power Source (BHR-04VS-1/Japan Solderless Terminal MFG Co., LTD) Mating connector

:

SM04 (4.0)B-BHS-1-TB/ Japan Solderless Terminal MFG Co., LTD

Terminal No. Symbol Function

1 VL1 CCFL power supply (high voltage) 2 VL2 CCFL power supply (high voltage) 3NC

1)

4 GL1 CCFL power supply (low voltage)

VL1 VL2 NC GL1

VL3 VL4 NC GL2

CCFL Power Source (BHR-04VS-1/Japan Solderless Terminal MFG Co., LTD)

:

Mating connector

SM04 (4.0)B-BHS-1-TB/ Japan Solderless Terminal MFG Co., LTD

Terminal No. Symbol Function

1 VL3 CCFL power supply (high voltage) 2 VL4 CCFL power supply (high voltage) 3NC

1)

4 GL2 CCFL power supply (low voltage)

Note 1) Please connects NC pin to nothing. Don’t connect it to ground nor to other signal

Input. (NC pin should be open.)

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 17 / 32

Document No. Revision 1.0

6.0 ELECTRICAL CHARACTERISTICS

6.1 Electrical System of LCD Module:

Item Symbol Condition

Input Voltage

Input Rush Current

Input Signal

voltage

V

DD

Irush

V

IH

V

IL

VDD = +3.3V

Each Iout = max.

High Level

Low Level

* Inrush current conditions

t=400us ~ 10ms

Value

Min. Typ. Max.

+3.0 +3.3 +3.6

2.4 3.3 VDD+0.2

0

－

3.3V

1.5(*)

0.9

Unit

V(DC)

A

V

6.2 Back-Light Unit:

The backlight system is an edge-lighting type with 4-CCFL (Cold Cathode Fluorescent Lamp).

The characteristics of four lamps are shown in the following tables.

Item Symbol Min. Typ. Max. Unit Note

Lamp current I

Lamp voltage V

Frequency f

L

567 630 693 V(rms) IL=6.5mA

Lamp life time Hr 30,000

6.5 7.0 mA(rms) (1)

50 60 KHz (2)

－－

Hour (3)

1160 at 25oC

Startup voltage Vs

1360

－－

V(rms)

at 0oC

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 18 / 32

Document No. Revision 1.0

Note: (1) Lamp current is measured with current meter for high frequency as shown below.

Specified values are for a lamp.

LCD MODULE

1

2

3

4

A

INVERTER

(Emax-

1

2

3

4

A

PLM143)

(2) Lamp frequency may produce interference with horizontal synchronous frequency and this

may cause line flow on the display. Therefore lamp frequency shall be detached from the

horizontal synchronous frequency and its harmonics as far as possible in order to avoid

interference.

(3) Life time (Hr) can be defined as the time in which it continues to operate under the condition:

Temp. =25±3ºC, IL=6.5mA(rms.) and fL=50 KHz until one of the following event occurs:

1.When the brightness becomes 50%.

2.When the startup voltage (Vs) at 0ºC becomes higher than the maximal value of Vs

specified above.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 19 / 32

Document No. Revision 1.0

6.3 AC Electrical Characteristics:

6.3.1 AC Timing: (VDD1=3.0V~3.6V, TOPR=25 oC) 5)

Item Symbol Min. Typ. Max. Unit Signals Note

Reference Signal (Pixel Clock)

Reference Signal (DENB)

Vertical Periodic

Horizontal Periodic

Periodic

Line Periodic

Line Active

Line Blank

Frame Periodic

Frame Active

Frame Blank

Periodic

Pulse Width

Set-up Time

Hold Time

Period

Pulse Width

Rising Time

Falling Time

Set-up Time

Hold Time

F1

T1=CLK

T2=T1*2

T3=Line 526 672 900 T2

T4 512 512 512 T2

T5 14 160 388 T2

T6 773 806 950 Lines

T7 768 768 768 Lines

T8 5 --- --- Lines

T6 773 806 950 Lines

T9 1 1 --- Lines

T13 700 800 --- n-Sec

T14 700 800 --- n-Sec

T15 --- 1 --- Lines

T16A

T16B

T16C T16D T17A

T17B

T17C T17D T18A

T18B

T18C T18D T19A

T19B T20A

T20B

50

12.5 25

1 1 2

25

2 2

2 2 7 7 7 7

65

15.384

30.769

64

30.769 40 40

4

4 40 40

4

4 10 10 10 10

80 20 40

100

40 60 60

60 60

--- n-Sec

MHz n-Sec n-Sec

u-Sec u-Sec

T2

n-Sec

STV

OE

CPV

LOAD

STH

LOAD

STH

1), 2), 4)

2)

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 20 / 32

Document No. Revision 1.0

Item Symbol Min. Typ. Max. Unit Signals Note

6Horizontal Periodic

Clock

Image Data And Data Reverse Control Pin

Relative Signals

Period Pulse Width Rising Time

Falling Time

Set-up Time

Hold Time

Period Rising Time

Falling Time

Setup time

Hold time

LOAD rising-

STH rising

CPV rising-

LOAD rising

T21 --- 2 --- Lines

T22 --- 1 --- Lines

T23 --- --- 8 n-Sec

T24 --- --- 8 n-Sec

T25 6 --- --- n-Sec

T26 2 --- --- n-Sec

T2 25.00 30.769 40 n-Sec

T27 --- --- 8 n-Sec

T28 --- --- 8 n-Sec

T29 6 --- --- n-Sec

T30 2 --- --- n-Sec

T31 6 --- --- T2

T32 3.5 3.7 4.5 u-Sec

POL

CPH1 CPH2

ER(5:0) EG(5:0) EB(5:0)

OR(5:0) OG(5:0) OB(5:0)

REV

3)

Note 1) Refer to VESA standard.

Note 2) In case of using the long frame period, the deterioration of display quality, noise etc. may be

occurred.

Note 3) Do not fix CPH1 and CPH2 to “H” or “L” level while the VDD (+3.3V) is supplied. If CPH1

and CPH2 is fixed to “H” level or “L” level for certain period while the VDD (+3.3V) is

supplied, the panel may be damaged.

Note 4) Do not change t3 and t6 values in the operation. When t1 or t4 is changed, the panel is

displayed as black.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 21 / 32

Document No. Revision 1.0

Note 5) Please adjust LCD operating signal timing and FL driving frequency, to optimize the display

quality. There is a possibility that flicker is observed by the interference of LCD operating

signal timing and FL driving condition (especially driving frequency).

6.3.2 AC Timing Charts:

(1). Reference Signal (pixel clock):

Reference Signal

(Pixel Clock)

Input Clock

T1

F1=1/T1

T2

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 22 / 32

Document No. Revision 1.0

(2). Vertical Periodic (STV1, STV2, OE, CPV):

T7 T8 T6

DENB

(For Reference)

STV

OE

CPV

LOAD

STH

DENB

(For Reference)

STV

OE

CPV

LOAD

STH

POL

T32

T23

T24

T16A

T3

T9

T13 T14

T16C

T21

T4 T5

T12T11

T16B

T17C

T15

T17A

T17B T18B

T22

T18A

T18C

+

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 23 / 32

Document No. Revision 1.0

(3). Horizontal Periodic 1 (STH, CPH, DATA):

T27 T28

CPH1

CPH2

STH

70%

30%

70%

30%

50%

T20BT19B

50%

T16D

T30T29

st

Odd R,G,B Data

Even R,G,B Data

INVALID

1

Pixel

2

Pixel

rd

3

Pixel

nd

4

Pixel

5

Pixel

th

6

Pixel

REV

(4). Horizontal Periodic 2 (CPH, LOAD, STH, POL):

th

50%

T2

7

Pixel

8

Pixel

th

9

Pixel

th

10

Pixel

th

11

Pixel

th

12

Pixel

1023

Pixel

1024

Pixel

th

CPH1

CPH2

LOAD

70%

30%

70%

30%

50%

T19A

T20A

50%

T2

50%

T16C

T31

STH

70% 50% 30%

T17D T18D

POL

T25

50%

T26

50%

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 24 / 32

Document No. Revision 1.0

(5). Initial Condition:

3.3V

100ms

Data

(R,G,B, other control signals)

35 ~ 100ms

Control

(OE)

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 25 / 32

Document No. Revision 1.0

6.4 Power On / Off Sequence：

Power On

Power Off

Power Supply

0V

0.1V

Signal

0.9V

DD

TP1

TP2

0.6V 0.6V

TP5

TP3

TP6

0.9V

0.1V

DD

TP4

0.1V

DD

Backlight

(Recommended)

50%

Item Min. Typ. Max. Unit Remark

TP1 0.4 TP2 100 TP3 0 TP4 1 TP5 200 TP6 200

－－－－－－－－－

10 msec

200 msec

50 msec

sec msec msec

Note：(1) The supply voltage of the external system for the module input should be the same as the

definition of VDD.

(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on

before the LCD operation or the LCD truns off before the back-light turns off, the display

may momentarily become white.

(3) In case of VDD = off level, please keep the level of input signal on the low or keep a high

impedance.

(4) T4 should be measured after the module has been fully discharged between power off and

on period.

(5)Interface signal shall not be kept at high impedance when the power is on.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 26 / 32

Document No. Revision 1.0

7.0 OUTLINE DIMENSION

7.1.1 Front View: Date: 2002.10.04

NOTE:

1. UNSPECIFIED DIMENSIONAL TOLERANCE ARE ±0.5mm

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 27 / 32

Document No. Revision 1.0

7.1.2 Back View: Date: 2003.02.26

可變電阻VR300

Note:

1. UNSPECIFIED DIMENSIONAL TOLERANCE ARE ±0.5mm

2. CONNE CT OR : J1,J2 Type 810SLS-040ET1R-X(HannStar Elec. Crop.)

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 28 / 32

Document No. Revision 1.0

8. LOT MARK

8.1 Lot Mark

１２３４５６７８９

code 1,2,3,4,5,6: HannStar internal flow control code. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number.

Note (1) Production Year

Year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008

Mark 9012345678

Note (2) Production Month

Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.

Mark 123456789ABC

8.2 Location of Lot Mark

(1) The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice.

10 11 12 13 14 15

HSD150SX89

-

Rev:

Lot mark

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 29 / 32

Document No. Revision 1.0

9.0 PACKAGE SPECIFICATION

9.1 packing form

(1) package quantity in one carton: 10 pieces. (2) carton size: 453± 3 mm× 360± 3 mm× 403± 3 mm. (3) for domestic transportation only.

9.2 packing assembly drawings

LCD Module

Bag

Packing pair

Packing plate

Bag

Tape

One packing

Packing plate

Tape

Carton

One carton contents of 5 packing pairs (Total 10 pieces)

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 30 / 32

Document No. Revision 1.0

9.3 Pallet transportation specification

Pallet

Packing case

1150± 5 mm

Band

Band clip

Tape

948± 5 mm

970± 5 mm

1 Pallet = 12 cartons

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 31 / 32

Document No. Revision 1.0

10.0 GENERAL PRECAUTION

10.1 Use Restriction

This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.

10.2 Disassembling or Modification

Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.

10.3 Breakage of LCD Panel

10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin.

10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.

10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.

10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is broken.

10.4 Electric Shock

10.4.1 Disconnect power supply before handling LCD module.

10.4.2 Do not pull or fold the CCFL cable.

10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s connector or cables in order to prevent electric shock.

10.5 Absolute Maximum Ratings and Power Protection Circuit

10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.

10.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time.

10.5.3 It’s recommended employing protection circuit for power supply.

10.6 Operation

10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.

10.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly.

10.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.

10.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading.

10.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

Document Title HSD150SX89 Product Information Page No. 32 / 32

Document No. Revision 1.0

10.7 Mechanism

Please mount LCD module by using mounting holes arranged in four corners tightly.

10.8 Static Electricity

10.8.1 Protection film must remove very slowly from the surface of LCD module to prevent from electrostatic occurrence.

10.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge.

10.8.3 Persons who handle the module should be grounded through adequate methods.

10.9 Strong Light Exposure

The module shall not be exposed under strong light such as direct sunlight. Otherwise, display characteristics may be changed.

10.10 Disposal

When disposing LCD module, obey the local environmental regulations.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar HSD150SX89-A00 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual