Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 1 / 31
Document No. Revision 1.0
To :Sebon
Date : March 30th .2005
www.panelook.com
Product information
Model : HSD150MX17
- AXX
Note: 1. Please contact HannStar Display Corp. before designing your product based on this module
specification.
2. The information contained herein is presented merely to indicate the characteristics and performance
of our products. No responsibility is assumed by HannStar for any intellectual property claims or
other problems that
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
may result from application based on the module described herein.
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 2 / 31
Document No. Revision 1.0
Rev. Updated No. Date Description of change
www.panelook.com
Record of Revisions
01 ѧ Mar.30.2005 Product S
issued.
pecification for HSD150MX17-A was first
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 3 / 31
Document No. Revision 1.0
1.0 General descriptions ……………………………….… p.4
2.0 Absolute maximum ratings ………………………….. p.5
3.0 Optical characteristics ……………………………….. p.7
www.panelook.com
Contents
4.0 Block diagram ………………………………………… p.12
5.0 I/O Connection Pin assignment ……………………….. p.15
6.0 Electrical Characteristics ………………….…………. p.16
7.0 Outline dimension …………………………….……… p.24
8.0 Lot Mark ……………………………………………….. p.26
9.0 Package Specification ……………………………...… p.27
10.0 General precaution ………………………………….. p.29
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 4 / 31
Document No. Revision 1.0
1.0 GENERAL DESCRIPTIONS
1.1 Introduction
HannStar Display model HSD150MX17-A is a color active matrix thin film transistor
(TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device.
This model is composed of a TFT LCD panel, the voltage reference, common voltage,
DC-DC converter, column, and row driver circuit. This TFT LCD has a 15-inch diagonally
measured active display area with XGA resolution (768 vertical by 1024 horizontal pixel
array).
1.2 Features
15” XGA TFT LCD panel
2 CCFLs Backlight system
Supported XGA (V:768 lines, H:1024 pixels) resolution
Supported to 75Hz refresh rate
With LCD Timing Controller
1.3 General information
Item Specification Unit
Outline dimension 326..5253.510.6 (typ.) mm
Display area 304.1(H) x 228.1(V) (15.0” diagonal) mm
Number of Pixel 1024(H) x 768(V) Pixels
Pixel pitch 0.297(H) x 0.297(V) mm
Pixel arrangement RGB Vertical stripe
Display color 16 million(6 bit + FRC)
Display mode Normally white
Surface treatment Antiglare, Hard-Coating(3H)
www.panelook.com
Weight 925(typ.) G
Back-light 2-CCFLs, Top & bottom edge side
Input signal Source and Gate Driver control signals
Power consumption
(with B/L)
Optimum viewing
direction
13 W(typ.), with back light W
6 o’clock
1.4 Applications
Desktop monitors
Display terminals for AV applications
Monitors for industrial applications
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 5 / 31
Document No. Revision 1.0
1.5 Mechanical Information
Item Min. Typ. Max. Unit
www.panelook.com
Horizontal(H) 326.0 326.5 327.0 mm
Module Size
Vertical(V) 253.0 253.5 254.0 mm
Depth(D) -- 10.6 10.9 mm
Weight (without inverter) -- 925 955 g
Torque of customer screw hole 3.0 Kgf*Cm
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item Symbol Min. Max. Unit Note
Storage temperature T
Operating temperature T
Vibration(non-operating) V
Shock(non-operating) S
Storage humidity H
Operating humidity HOP 10 80 %RH (4)
Low pressure(operating) P
Low pressure(non-operating) P
-20 60 oC
STG
0 50 oC (1)
OPR
-- 1.5 G (2)
NOP
-- 70 G (3)
NOP
10 90 %RH (3)
STG
697 -- HPa (5)
LOP
116 -- HPa (6)
LNOP
Note (1)Storage /Operating temperature
Humidity (%)
100
90
80
60
Storage Range
-20-40
40
20
10
0
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Operating Range
0
Temperature (
20 40 60
o
C)
50
65
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 6 / 31
Document No. Revision 1.0
(2) 5-500-5Hz sine wave, X,Y,Z each directions, 30 min/cycle.
(3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test,
It is necessary to fill the silicon rubber between the shock jig as buffer.
(4) Max wet bulb temp. =39
(5) 2 hrs. (10000 feet)
(6) 24hrs. (50000 feet)
2.2 Electrical Absolute Rating:
2.2.1 TFT LCD Module:
www.panelook.com
o
C
Item Symbol Min. Max. Unit. Note
Power supply Voltage
Logic input voltage
V
V
DD
SIG
+3.0 +3.6
-0.3
V
+0.3
DD
V(DC)
V (1)(2)
(1)(2)
2.2.2 Back Light Unit:
Item Symbol Min. Max. Unit Note
Lamp voltage
Lamp current
Lamp frequency
V
L
I
L
f
L
0 2000 V(rms) (1)(2)
Ё
9.0 mA (1)(2)
0 80 KHz (1)(2)
Note: (1) Permanent damage may occur to the LCD module if beyond this specification.
Functional operation should be restricted to the conditions described under
Normal Operating Conditions.
(2) Within Ta=25±2°C
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 7 / 31
Document No. Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR 500 600 -- (1)(2)
Response time
Rising
Falling
www.panelook.com
TR +TF -- 16 26 msec (1)(3)
White luminance
(center of screen)
Red
200 250 cd/m
Y
L
Rx
Ry
Gx
Gy
Bx
Color
chromaticity
(CIE1931)
Gree
n
Blue
By
White
Wx
Wy
Hor.
Viewing angle
Ver.
Brightness uniformity B
ӘL 55 65 --
Ә
R
Ә
H
Ә
L
UNI
Crosstalk CT(n)
o
Ә=0
o
I=0
Normal
viewing
angle
55 65 --
CR>10
0.604 0.634 0.664
0.309 0.339 0.369
0.255 0.285 0.315
0.557 0.587 0.617
0.114 0.144 0.174
0.045 0.075 0.105
0.280 0.310 0.340
0.300 0.330 0.360
35 45 --
45 55 --
o
Ә=0
75 80 -- % (5)
o
I=0
-- -- 1.3 % (6)
(1)(4)=
2
(IL=8.0mA)
(1)(4)
3.2 Measuring Condition
Measuring surrounding : dark room
Lamp current I
V
=3.3V, fV=60Hz, f
DD1
Surrounding temperature : 25±2
30min. Warm-up time.
3.3 Measuring Equipment
LCD-7000 of Otsuka Electric Corp., which utilized MCPD-7000 for Chromaticity
and BM-5A for other optical characteristics.
Measuring spot size : 10~12mm
: (8.0)±0.1mA, lamp freq. FL=55 KHz,Inverter :HIU-766(11pf)
BL
=32.5MHz
DCLK
o
C
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 8 / 31
Document No. Revision 1.0
Note (1) Definition of Viewing Angle:
ӘL=90
o
Note (2) Definition of Contrast Ratio(CR) :
measured at the center point of panel
Ә
L
6’ o’clock
ӥ
www.panelook.com
ӥ
H
12’ o’clock
ӥ
Ә
ӥ
L
o
=90
L
H
R
=90
o
ӘR=90
o
Luminance with all pixels white (L255)
CR =
Luminance with all pixels black (L0)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 9 / 31
Document No. Revision 1.0
www.panelook.com
Note (3) Definition of Response Time: Sum of T
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
R
100%
90%
and T
R
Optical
response
10%
0%
Note (4) Optical characteristic measurement setup
F
T
F
Photo-detector (BM-5A)
time
Field=2
o
50cm
LCD panel
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 10 / 31
Document No. Revision 1.0
Note (5) Definition of brightness uniformity
Luminance uniformity = x 100%
256 512 768
www.panelook.com
(Min Luminance of 9points)
(Max Luminance of 9 points)
Y2
Y3
192
Y1
384
Y4 Y5
576
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Ё
V
H
Ё
(3)
Ё
V
H
Ё
(3)
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 11 / 31
Document No. Revision 1.0
Note (6) Definition of crosstalk CT (1) ~ CT (4)
L (n) – LB (n)
CT(n) = x 100% , n = 1 ~ 4
L (n)
Where L(n) = Luminance of point “n” at pattern A (cd/m
LB(n) = Luminance of point “n” at pattern B (cd/m
The location measured will be exactly the same in both patterns.
www.panelook.com
2
) , n=1Д4
2
) , n=1Д4
L0: Luminance with all pixels black
L255: Luminance with all pixels white
Gray scale: L127
1
V
Ё
1
Ё
4
V
V
8
L
1
Ё
V
1
4
V
8
1
Ё
H
8
1
Ё
4
1
Ё
2
H
L(1)
L(4)
L(2)
1
8
1
Ё
H
4
1
Ё
H
2
H
Gray scale: L0
1
Ё
1
Ё
V
8
V
4
Gray scale: L127
LB(1)
LB(4)
LB
1
Ё
V
2
1
Ё
V
1
4
V
8
1
Ё
H
8
1
Ё
4
LB(2)
1
8
1
Ё
H
1
Ё
H
2
H
H
4
Pattern A Pattern B
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
r
r
r
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 12 / 31
Document No. Revision 1.0
4.0 BLOCK DIAGRAM
4.1 LCD Module Block Diagram:
TCON with
CN1
LVDS receive
www.panelook.com
X-driver IC
Connecto
DC/DC
Converte
4.2 Back Light Unit
Liquid Crystal Panel
-driver IC
1024768 pixels
Gray scale
Manipulation
Voltage
Generation
Circuit
CN3
CN4
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 13 / 31
Document No. Revision 1.0
4.3 Pixel Format
www.panelook.com
1,1
1,2
1,3
(odd)
2,1
(odd)
(even)
(odd)
1,4
(even)
LCD Display Area
1,1024
R
R
1 Pixel
G
768,
1024
768 Lines
R
B
768,1
1024 Pixels
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 14 / 31
Document No. Revision 1.0
4.4 Relationship between Displayed Color and Input Data
Basic
color
Gray
scale
of
Red
Gray
scale
of
Green
Gray
scale
of
Blue
Gray
scale
of
White
and
Black
Display
Black LLLLLLLLLLLLLLLLLL -
Blue LLLLLLLLLLLLHHHHHH -
Green LLLLLLHHHHHHLLLLLL -
Light Blue LLLLLLHHHHHHHHHHHH -
Red HHHHHHLLLLLLLLLLLL -
Purple HHHHHHLLLLLLHHHHHH -
Yellow H H H H H H H H H H H H LLLLLL -
White H H H H H H H H H H H H H H H H H H -
Black LLLLLLLLLLLLLLLLLL L0
Dark
Light
Red HHHHHHLLLLLLLLLLLLRed L63
Black LLLLLLLLLLLLLLLLLL L0
Dark
Light
Green LLLLLLHHHHHHLLLLLLGreen L63
Black LLLLLLLLLLLLLLLLLL L0
Dark
Light
Blue LLLLLLLLLLLLHHHHHHBlue L63
Black LLLLLLLLLLLLLLLLLL L0
Dark
Light
White H H H H H H H H H H H H H H H H H H White L63
MSB LSB
R5 R4 R3 R2 R1 R0
LLLLLHLLLLLLLLLLLL L1
LLLLHLLLLLLLLLLLLL L2
HHHHLHLLLLLLLLLLLL L61
HHHHHLLLLLLLLLLLLL L62
LLLLLLLLLLLHLLLLLL L1
LLLLLLLLLLHLLLLLLL L2
LLLLLLHHHHLHLLLLLL L61
LLLLLLHHHHHLLLLLLL L62
LLLLLLLLLLLLLLLLLH L1
LLLLLLLLLLLLLLLLHL L2
LLLLLLLLLLLLHHHHLH L61
LLLLLLLLLLLLHHHHHL L62
LLLLLHLLLLLHLLLLLH L1
LLLLHLLLLLHLLLLLHL L2
HHHHLHHHHHLHHHHHLH L61
HHHHHLHHHHHLHHHHHL L62
www.panelook.com
MSB LSB
G5 G4 G3 G2G1 G0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
MSB LSB
B5 B4 B3 B2 B1 B0
:
:
:
:
:
:
:
:
Gray scale
level
L3…L63
L3…L60
L3…L60
L3…L60
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 15 / 31
Document No. Revision 1.0
5.0 I/O CONNECTION PIN ASSIGNMENT
5.1 Interface Connector (20-pins x 1) (Hirose: DF14H-20P-1.25H)
Pin No. Symbol Description
˄ʳ
VDD Power Supply, 3.3v (typical)
˅ʳ
VDD Power Supply, 3.3v (typical)
ˆʳ
VSS Ground
ˇʳ
VSS Ground
www.panelook.com
I/F Connector (CH11)
ˈʳ
Rin0- -LVDS differential data input(R0-R5, G0)
ˉʳ
Rin0+ +LVDS differential data input(R0-R5, G0)
ˊʳ
VSS Ground
ˋʳ
Rin1- -LVDS differential data input(G1-G5, B0-B1)
ˌʳ
Rin1+ +LVDS differential data input(G1-G5, B0-B1)
˄˃ʳ
VSS Ground
˄˄ʳ
Rin2- -LVDS differential data input(B2-B5, HS, VS, DE)
˄˅ʳ
Rin2+ +LVDS differential data input(B2-B5, HS, VS, DE)
˄ˆʳ
VSS Ground
˄ˇʳ
ClkIN- -LVDS differential clock input
˄ˈʳ
ClkIN+ +LVDS differential clock input
˄ˉʳ
VSS Ground
˄ˊʳ
Rin3- -LVDS differential data input(R6-R7, G6-G7, B6-B7)
˄ˋʳ
Rin3+ +LVDS differential data input(R6-R7, G6-G7, B6-B7)
˄ˌʳ
VSS Ground
˅˃ʳ
VSS Ground
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 16 / 31
Document No. Revision 1.0
5.1 Back Light Unit (CCFL) Connectors:
CN3, 4: CCFL Power Source (BHR-03VS-1/Japan Solderless Terminal MFG Co., LTD)
Mating connector: SM02 (8.0)B-BHS-1/ Japan Solderless Terminal MFG Co., LTD
Terminal No. Symbol Function
1 VL CCFL power supply (high voltage)
2 NC No connection
3 GL CCFL power supply (low voltage)
Note: Please connects NC pin to nothing. Don’t connect it to ground nor to other signal
Input. (NC pin should be open.)
www.panelook.com
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module:
Item Symbol Min. Typ. Max. Unit Note
Voltage of power supply VDD 3.0 3.3 3.6 V
Current of power
supply
Vsync frequency fV - 60 75 Hz (2)(3)
Hsync frequency fH - 48.36 75 KHz
Frequency f
Input rush current I
Note (1)
1). V-Color :
V-Color I
Mosaic I
Yellow
White
Purple
Red
260 360 460 mA (1)(3)
DD1
290 390 490 mA (1)(3)
DD2
- 65.00 80 MHz
DCLK
--- --- 1.5 A (3)(4)
RUSH
Cyan
Green
Blue
Black
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 17 / 31
Document No. Revision 1.0
2). Mosaic : Dot checker image
www.panelook.com
L31
Grey scale: L0ДL255.
L0: Luminance with all pixels black.
L255: Luminance with all pixels white.
Note (2) When fv is too low, a flicker may be occurred on the display.
Note (3) Input Rush Current condition
0.9VDD
GND
0.1VDD
L0
3.3V
470us~10ms
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 18 / 31
Document No. Revision 1.0
6.2 Back-Light Unit
The back-light system is an edge-lighting type with 2 CCFL
www.panelook.com
(Cold Cathode Fluorescent Lamp).
The characteristics of the lamp is shown in the following tables.
Item Symbol Min. Typ. Max. Unit Note
Lamp current IL 3.0 8.0 9.0 mA(rms) (1)
Lamp voltage VL
576 640 700
V(rms) IL=8.0mA
Frequency fL 50 55 80 kHz (2)
Operating lamp life time Hr 30,000 -- -- Hour (3)
Startup voltage Vs
1040 at 25oC
1350
-- -- V(rms)
at 0
Note (1)
Lamp current is measured with current meter for high frequency as shown below. Specified
values are for a single lamp.
1
2
3
A
INVERTER
LCD MODULE
1
2
3
A
(HIU-766)
o
C
Note (2)
Lamp frequency may produce interference with horizontal synchronous frequency and this may
cause ripple noise on the display. Therefore lamp frequency shall be kept away from the
horizontal synchronous frequency and its harmonics as far as possible in order to avoid
interference.
Note (3)
Lamp life time (Hr) can be defined as the time in which it continues to operate under the
condition : Ta=25±3
o
C, Typical IL value indicated in the above table and fL=55kHz until the
brightness becomes less than 50%
Note (4)
CCFL inverter should be able to provide a voltage over specified value (Vs) in the above table.
Lamp units need at least Vs value shown above to ignition.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 19 / 31
Document No. Revision 1.0
Note (5)
The voltage over specified value (Vs) should be applied to the lamp more than 1 second after
startup. Otherwise, the lamp may not be turned on. The used lamp current is the lamp typical
current.
Note (6)
The output voltage waveform and current waveform of the inverter must be symmetrical
(Unsymmetrical ratio is less than 10%). Please do not use the inverter which has unsymmetrical
voltage and current waveform, and spike waveform. The inverter design which can provide the
best optical performance, power efficiency, and lamp life should under the following conditions.
a. The asymmetry rate of the inverter waveform should be less than 10%.
b. The distortion tae of the waveform should be within Ѕ2±10%.
c. The inverter output waveform should be better similar to the ideal sine wave.
www.panelook.com
Asymmetry rate = |I
Distortion rate = I
p (or I-p) / Irms
Ip
I-p
p-I-p| / Irms x 100%
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 20 / 31
Document No. Revision 1.0
6.3 AC Electrical Characteristics:
6.3.1 Timing Parameters (Hsync, Vsync and DE mode)
Item Symbol Min. Typ. Max. Unit
Period t1
Vertica l
display term
Active t2
Display
start
Period t4
Horizontal
display term
Active t5
Display
Start
Period t7 12.50 15.38
Clock
Low time t8 5
High time t9 5
Setup time t10
Data
Hold time t11 5
Note 1) Refer to TIMING CHART at page19, 20 and 21.
Note 2) In case of using the long frame period, the deterioration of display quality, noise
etc. may be occurred.
Note 3) When ENAB is fixed to “L” level after NCLK input, the panel is displayed as black.
However, a flicker may be occurred on the display. When ENAB is fixed to “H”
level after NCLK input, the panel will be damaged.
Note 4) Do not fix NCLK to “H” or “L” level while the V
fixed to “H” level or “L” level for certain period while the V
the panel may be damaged.
Note 5) Do not change t1 and t4 values in the operation. When t1 or t4 is changed, the
panel is displayed as black.
Note 6) Please adjust LCD operating signal timing and FL driving frequency, to optimize
the display quality. There is a possibility that flicker is observed by the
interference of LCD operating signal timing and FL driving condition (especially
driving frequency).
www.panelook.com
778ut4
Ё
Ё
8ut4
t3
t6
Ё
1180 ut7
Ё
Ё
32ut7
Ё
2
1344ut7
1024ut7
806ut4
16.67
768ut4
15.88
Ё
20.68
15.76
Ё
Ё
Ё
Ё
Ё
Remar
ks
860ut4
Ё
Ё
Ё
ms
Ё
1) 5)
1)
ms
Ё
1400ut7
Ё
Ё
Ё
Ё
Ё
Ё
Ё
Ё
(+3.3V) is supplied. If NCLK is
DD
Ё
1)
ms
1) 5)
Ё
Ps
1)
Ё
Ps
1)
Ё
Ps
5)
ns
ns
ns
ns
ns
(+3.3V) is supplied,
DD
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
K
K
,2,
,
,
1022
,
1023
,
1024
,
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 21 / 31
Document No. Revision 1.0
6.3.2 Timing Diagram of Interface Signal (Hsync, Vsync and DE mode)
24 Bit two pixel/clock input mode
www.panelook.com
t3
t6
t4
X,766 X,767 X,768
X
X
X
t2
t1
X,Y X,1 X,2 X,3
t5
4
3
t4
t7
1
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
CL
Hsync
ENAB
Vsync
R7~R0
G7~G0
B7~B0
Horizontal Timing
CL
Hsync
ENAB
R7~R0
G7~G0
B7~B0
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 22 / 31
Document No. Revision 1.0
www.panelook.com
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 23 / 31
Document No. Revision 1.0
(5). Initial Condition:
VDD
(3.3V)
Power ON
0V
www.panelook.com
0.9 VDD
Dat a &
Control signal s
100 ms
40 ms
OE
* Input Power (VDD) should be 0V(GND) before Power-ON.
* All signals (including control signals and data) should be kept low
before it is active.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Κ
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 24 / 31
Document No. Revision 1.0
6.4 Power On / Off Sequence
www.panelook.com
Power Supply
0.1V
0V
Signal
0V
Backlight
(Recommended)
TP6
50%
Power Off
0.9V
TP3
DD
0.1V
DD
0.1VDD
TP4
Power On
0.9VDD
DD
TP1
TP2
0.6V 0.6V
TP5
50%
Item Min. Typ. Max. Unit Remark
TP1 0.5
TP2 0
Ё
Ё
10 msec
50 msec
TP4 1
TP5 200
TP6 200
Ё Ё
Ё Ё
Ё Ё
sec
msec
msec
NoteΚ(1) The supply voltage of the external system for the module input should be the same as the
definition of V
DD
.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on
before the LCD operation or the LCD truns off before the back-light turns off, the display
may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or keep a high
impedance.
(4) T4 should be measured after the module has been fully discharged between power off and
on period.
(5)Interface signal shall not be kept at high impedance when the power is on.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 25 / 31
Document No. Revision 1.0
7.0 OUTLINE DIMENSION
8.1 Front View: Date: 2003.09.08
www.panelook.com
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Κ
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 24 / 31
Document No. Revision 1.0
6.4 Power On / Off Sequence
www.panelook.com
Power On
Power Off
Power Supply
0.9VDD
0.1V
0V
DD
Signal
0V
Backlight
(Recommended)
TP1
TP2
0.6V 0.6V
TP5
50%
TP3
TP6
50%
0.9V
DD
0.1V
DD
0.1VDD
TP4
Item Min. Typ. Max. Unit Remark
TP1 0.5
TP2 0
TP3 0
TP4 1
TP5 200
TP6 200
NoteΚ(1) The supply voltage of the external system for the module input should be the same as the
Ё
Ё
Ё
10 msec
50 msec
50 msec
Ё Ё
Ё Ё
Ё Ё
sec
msec
msec
definition of V
DD
.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on
before the LCD operation or the LCD truns off before the back-light turns off, the display
may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or keep a high
impedance.
(4) T4 should be measured after the module has been fully discharged between power off and
on period.
(5)Interface signal shall not be kept at high impedance when the power is on.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 27 / 31
Document No. Revision 1.0
9.0 LOT MARK
9.1 Lot Mark
www.panelook.com
１２３４５６７８９
10 11 12 13 14 15
code 1,2,3,4,5,6: HannStar internal flow control code.
code 7: production location.
code 8: production year.
code 9: production month.
code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008
Mark 9 0 1 2 3 4 5 6 7 8
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
9.2 Location of Lot Mark
(1) The label is attached to the backside of the LCD module.
(2) This is subject to change without prior notice.
HSD150MX17
-A**
Rev:
Lot mark
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
ˋˋ
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 28 / 31
Document No. Revision 1.0
10.0 PACKAGE SPECIFICATION
10.1 packing form
(1) package quantity in one carton: 15 pieces.
(2) carton size: 4643 mm3603 mm431
(3) for domestic transportation only.
10.2 packing assembly drawings
LCD Module
www.panelook.com
H
3 mm.
Bag
Tape
One packing
Tape
Carton
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
d
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 29 / 31
Document No. Revision 1.0
10.3 Pallet transportation specification
www.panelook.com
Pallet
Packing case
11505 mm
Ban
Band clip
Tape
10045 mm
9705 mm
1 Pallet = 12
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 30 / 31
Document No. Revision 1.0
11.0 GENERAL PRECAUTION
11.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation
control systems, military systems and any other application where performance failure
could be life-threatening or otherwise catastrophic.
11.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD
module, and may cause scratches or dust on the display. HannStar does not warrant the
module, if customers disassemble or modify the module.
11.3 Breakage of LCD Panel
11.31 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid
crystal, and do not contact liquid crystal with skin.
11.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
11.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
11.3.4 Handle carefully with chips of glass that may cause injury, when the glass is
broken.
11.4 Electric Shock
11.4.1 Disconnect power supply before handling LCD module.
11.4.2 Do not pull or fold the CCFL cable.
11.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s connector
or cables in order to prevent electric shock.
11.5 Absolute Maximum Ratings and Power Protection Circuit
11.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental
temperature, etc., otherwise LCD module may be damaged.
11.5.2 Please do not leave LCD module in the environment of high humidity and high
temperature for a long time.
11.5.3 It’s recommended employing protection circuit for power supply.
11.6 Operation
11.6.1Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
Use fingerstalls of soft gloves in order to keep clean display quality, when persons
11.6.2 handle the LCD module for incoming inspection or assembly.
11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft
material.
11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color
fading.
11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little
petroleum benzine or other adequate solvent.
www.panelook.com
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
HannStar Display Corp.
Document Title HSD150MX17- A Product information Page No. 31 / 31
Document No. Revision 1.0
11.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
11.8 Static Electricity
11.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
11.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is
very weak to electrostatic discharge. Please be careful with electrostatic discharge.
11.8.3 Persons who handle the module should be grounded through adequate methods.
11.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
www.panelook.com
11.10 Disposal
When disposing LCD module, obey the local environmental regulations.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...