How it Works
HannStar
Loading...
HSD101PWW1-A
Product Specification
26 pgs401.39 Kb0

HannStar HSD101PWW1-A Product Specification

Download
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 1/26
Document No. DC170-007181 Revision 1.0
TO :
Date :
Customer Acceptance Specification
Model: HSD101PWW1
www.jxlcd.com
www.jxlcd.com
Accepted by:
Note: (1) Please contact HannStar Display Corp. before designing your product based on
this module specification.
(2) The information contained herein is presented merely to indicate the characteristics and
performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that may result from application based on the module described herein.
Signature Date
-A++
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
was first
Document Title HSD101PWW1 Standard Specification Page No. 2/26
Document No. DC170-007181 Revision 1.0
Record of Revisions
Rev.
1.0 Apr 28, 2011
Date Sub-Model
www.jxlcd.com
www.jxlcd.com
Description of change
A++ Customer Acceptance Specification of HSD101PWW1-A
released.
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 3/26
Document No. DC170-007181 Revision 1.0
Contents
1.0 General description ………………………………… p.4
2.0 Absolute maximum ratings……………………………. p.5
3.0 Optical characteristics.………………………………. p.6
4.0 Block diagram ……………………………………… p.10
5.0 Interface pin connection …………………………… p.12
6.0 Electrical characteristics …………………………… p.14
7.0 Reliability test items ………………………………… p.21
8.0 Outline dimension …………………………………… p.22
9.0 Lot mark ……………………………………………... p.23
10.0 Package specification ……………………………… p.24
www.jxlcd.com
11.0 General precaution …………………………………… p.25
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 4/26
Document No. DC170-007181 Revision 1.0
1.0 GENERAL DESCRIPTION
1.1 Introduction
HannStar Display model HSD101PWW1-A is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 10.1 (16:10) inch diagonally measured active display area with WXGA (1280 horizontal by 800 vertical pixel) resolution.
1.2 Features
■ 10.1 (16:10 diagonal) inch configuration
■ One channel LVDS interface
■ 262K color by 6 bit R.G.B signal input
■ RoHS Compliance
■ Halogen Free
1.3 Applications
Handbook Notebook
1.4 General information
www.jxlcd.com
www.jxlcd.com
Outline Dimension 229.46(Typ) x 149.2(Typ) x 5.0(Max) mm Display area 216.96(H) x 135.6(V) mm Number of Pixel 1280 RGB (H) x 800(V) pixels Pixel pitch 0.1695(H) x 0.1695(V) mm Pixel arrangement RGB Vertical stripe Display mode Normally Black NTSC 45 %
Surface treatment Weight 170(Max.) g
Back-light White LED Power
Consumption
Item Specification Unit
Glare, Anti-Reflection≦1.5%, Hard-Coating (3H)
3.6 (Max.) VDD =3.3V、white pattern
Logic and BLU
VLED =12V
W
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 5/26
Document No. DC170-007181 Revision 1.0
1.5 Mechanical Information
Module
Size
Weight
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Electrical Absolute Rating
2.1.1 TFT LCD Module
Logic Supply voltage
2.1.2 Environment Absolute Rating
Operating Temperature T Storage Temperature T
www.jxlcd.com
www.jxlcd.com
Item Min. Typ. Max. Unit Horizontal (H) 228.96 Vertical (V) 148.7 149.2 149.7 mm Depth (D)
Item Symbol Min. Max. Unit Note
VDD -0.3 4.0 V
Item Symbol Min. Max. Unit Note
－ － －
0 50 ℃
opa
-20 60 ℃
stg
229.46
－ 170 g
229.96
5.0 mm
mm
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 6/26
Document No. DC170-007181 Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR Response time Rising Tr+Tf
White luminance (5 point)
Color chromaticity
(CIE1931)
www.jxlcd.com
Viewing angle
www.jxlcd.com
Red
Green
Blue
White
Hor.
Ver.
YL 280 350 Rx
RY Gx
GY
Bx
BY Wx
Wy
Θ
L
Θ
R
Θ
U
Θ
D
Θ=0
Normal viewing
angle
CR>10
640 800
－
0.542
0.314
0.288
0.509
0.127
0.077
0.283
0.299 80 89 80 89 80 89 80 89
25 35
0.572
0.344
0.318
0.539
0.157
0.107
0.313 0.343
0.329 0.359
－
－
0.602
0.374
0.348
0.569
0.187
0.137
－ －
－
－
(1)(2)(4)
msec
2
cd/m
(1)(4)
(1)(3)
(1)(4)(5)
(IL=16.25mA)
Brightness uniformity B
Brightness Uniformity B
3.2 Measuring Condition
■ Measuring surrounding：dark room
■ Ambient temperature：25±2oC
■ 15min. warm-up time.
UNI
UNI
Θ=0
(5point)
Θ=0
(13 points)
－ －
－
－
1.25
1.5
(6)
(6)
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 7/26
Document No. DC170-007181 Revision 1.0
3.3 Measuring Equipment
■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and BM-5A for other optical characteristics.
■ Measuring spot size：20 ~ 21 mm
Note (1) Definition of Viewing Angle:
Note (2) Definition of Contrast Ratio (CR) : measured at the center point of panel
Luminance with all pixels white CR = Luminance with all pixels black
www.jxlcd.com
www.jxlcd.com
Φ=180o
Θ
L
6’ o’clock
Φ=270
Θ
D
Θ
U
12’ o’clock
Φ=90
Θ
o
o
R
Φ=0o
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 8/26
Document No. DC170-007181 Revision 1.0
Note (3) Definition of Response Time : Sum of TR and TF
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
R
100%
90%
Optical response
Note (4) Definition of optical measurement setup
www.jxlcd.com
www.jxlcd.com
10%
0%
T
F
time
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 9/26
Document No. DC170-007181 Revision 1.0
Note (5) Definition of Average Luminance Uniformity of White (5 Point)
Average Luminance Uniformity =
10mm 1/4H 1/2H 3/4H 10mm
Y6
Y2
Y13
Y5
Y12
www.jxlcd.com
www.jxlcd.com
Note (6) Definition of brightness uniformity
Y7 Y8
Y1
Y1+Y2+Y3+Y4+Y5
5
Y3
Y9
Y4
Y10Y11
10mm
1/4V
1/2V
3/4V
10mm
Luminance uniformity(13points) =
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
Luminance uniformity(5 points) =
(Max Luminance of 5 points)
(Min Luminance of 5 points)
(Max Luminance of 13 points) (Min Luminance of 13 points)
HannStar Display Corp.
t shall not
LED
Document Title HSD101PWW1 Standard Specification Page No. 10/26
Document No. DC170-007181 Revision 1.0
4.0 BLOCK DIAGRAM
4.1 TFT LCD Module:
X-driver IC
Driver
Timing
Connector
EDID
DC/DC
Converter
Controller
+
LVDS
Receiver
Liquid Crystal Panel
1280x800 pixels
Y-driver IC
www.jxlcd.com
www.jxlcd.com
4.2 Pixel Format
The information contained in this document is the exclusive property of HannStar Display Corporation. I
1,1
2,1
800,1
1,2 1,3 1,4
Gray scale
Manipulation
Voltage
Generation
Circuit
1280 pixel (3840 Dots)
LCD Display Area
1 Pixel
R B G
R
R
1,1280
800,
1280
800 Lines
Corporation.
HannStar Display Corp.
t shall not
scale of
Document Title HSD101PWW1 Standard Specification Page No. 11/26
Document No. DC170-007181 Revision 1.0
4.3 Relationship Between Displayed Color and Input
Basic color
Gray scale of Red
Gray scale of Green
Gray scale of Blue
Gray White &
Black
MSB LSB
Display
Black L L L L L L L L L L L L L L L L L L
Blue L L L L L L L L L L L L H H H H H H
Green L L L L L L H H H H H H L L L L L L
Light Blue L L L L L L H H H H H H H H H H H H
Red H H H H H H L L L L L L L L L L L L Purple H H H H H H L L L L L L H H H H H H Yellow H H H H H H H H H H H H L L L L L L
White H H H H H H H H H H H H H H H H H H
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Red H H H H H H L L L L L L L L L L L L Red L63
Black L L L L L L L L L L L L L L L L L L
Dark
www.jxlcd.com
Light
Green L L L L L L H H H H H H L L L L L L Green L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Blue L L L L L L L L L L L L H H H H H H Blue L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
White H H H H H H H H H H H H H H H H H H White L63
R5 R4 R3 R2 R1 R0
L L L L L H L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L
↑ ↓
H H H H L H L L L L L L L L L L L L H H H H H L L L L L L L L L L L L L
L L L L L L L L L L L H L L L L L L L L L L L L L L L L H L L L L L L L
↑
www.jxlcd.com
↓
L L L L L L H H H H L H L L L L L L L L L L L L H H H H H L L L L L L L
L L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L L L L H L
↑ ↓
L L L L L L L L L L L L H H H H L H L L L L L L L L L L L L H H H H H L
L L L L L H L L L L L H L L L L L H L L L L H L L L L L H L L L L L H L
↑ ↓
H H H H L H H H H H L H H H H H L H H H H H H L H H H H H L H H H H H L
: :
: :
: :
: :
MSB LSB G5 G 4 G3 G 2 G1 G 0
: :
: :
: :
: :
MSB LSB B5 B 4 B3 B 2 B1 B0
: :
: :
: :
: :
Gray scale
L3…L60
L3…L60
L3…L60
L3…L60
level
-
-
-
-
-
-
-
­L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 12/26
Document No. DC170-007181 Revision 1.0
5.0 INTERFACE PIN CONNECTION
5.1
TFT LCD Module：
Pin No. Signal Description
1 NC No Connection 2 VDD Power Supply, 3.3V (typical) 3 VDD Power Supply, 3.3V (typical) 4 DVDD DDC 3.3V power 5 NC No Connection 6 SCL EDID Clock 7 SDA EDID Data 8 Rin0- - LVDS differential data input (R0-R5,G0)
9 Rin0+ +LVDS differential data input (R0-R5,G0) 10 GND Ground 11 Rin1- - LVDS differential data input(G1-G5,B0-B1) 12 Rin1+ +LVDS differential data input (G1-G5,B0-B1) 13 GND Ground 14 Rin2- - LVDS differential data input (B2-B5,HS,VS,DE) 15 Rin2+ +LVDS differential data input (B2-B5,HS,VS,DE) 16 GND Ground 17 CIKIN- -LVDS differential clock input 18 CIKIN+ +LVDS differential clock input 19 NC No Connection
www.jxlcd.com
www.jxlcd.com
20 NC No Connection 21 NC No Connection 22 GND Ground-Shield 23 NC No Connection 24 NC No Connection 25 GND Ground-Shield 26 NC No Connection 27 NC No Connection 28 GND Ground-Shield 29 NC No Connection 30 NC No Connection 31 VLED_GND LED Ground 32 VLED_GND LED Ground 33 VLED_GND LED Ground 34 NC No Connection 35 PWM PWM Signal for LED dimming control 36 LED_EN LED Enable Pin (+3V Input) 37 NC No Connection 38 VLED LED Power Supply 39 VLED LED Power Supply 40 VLED LED Power Supply
Note：：：：The brightness of LCD panel could be changed by adjusting PWM
：
CN1 (Input signal): ): IPEX 20455-040E-12 (IPEX or equivalent)
：：
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Supply Voltage
3.0v
td
Document Title HSD101PWW1 Standard Specification Page No. 13/26
Document No. DC170-007181 Revision 1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module
Item Symbol
VDD 3.0 3.3 3.6 V
Current of power supply
Inrush current
Note (1): V
When VDD operating within 2.7V≦VDD<3.0V，td≦10ms , the display may
VDD<2.7V , VDD dip condition should also follow the Power On/Off
DD-
momentarily become abnormal.
IDD - 0.265 - A
I
RUSH
dip condition:
Min. Typ. Max. Unit
VDD =3.3V、White
- - 1.50 A Note (2)
Note
Note (2)
pattern (L63)
conditions for supply voltage.
.
VDD
www.jxlcd.com
www.jxlcd.com
GND
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 14/26
Document No. DC170-007181 Revision 1.0
Note ：：：：(2) Power on Inrush current test circuit
www.jxlcd.com
www.jxlcd.com
VDD
0.9VDD
0.1VDD
0V
0.5 ms
Vin rising time
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
2.5/7T
5.5/7T
Document Title HSD101PWW1 Standard Specification Page No. 15/26
Document No. DC170-007181 Revision 1.0
6.2 Switching Characteristics for LVDS Receiver
Item Symbol Min. Typ.
Max. Unit Conditions Differential Input High Threshold Vth Differential Input Low Threshold
Input Current Differential input Voltage
Common Mode Voltage Offset VCM (|VID|/2)
6.3 Bit Mapping & Interface Definition
7T
6.5/7T
4.5/7T
3.5/7T
1.5/7T
0.5/7T
RCLK
www.jxlcd.com
www.jxlcd.com
Rin0
－ －
Vtl -100
I
IN
|VID|
-10
0.1
－ － － －
1.25
R[2] R[1] R[0] G[0] R[5] R[4] R[3] R[2] R[1] R[0] G[0]
100 mV
VCM=1.2V
mV
+10 uA
0.6 V
2.4-(|VID|/2) V
Rin1
Rin2
B[4] B[3] B[2] DE
G[2] G[1] B[1] B[0] G[5] G[4] G[3] G[2] G[1] B[1] G[3]
Pervious cycle Current cycle
LVDS Receiver Input Timing Definition
(VS)
(HS)
B[5] B[4] B[3] B[2] DE
Next cycle
for 6bits LVDS input
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
(2)Horizontal
Document Title HSD101PWW1 Standard Specification Page No. 16/26
Document No. DC170-007181 Revision 1.0
6.4 Interface Timing (DE mode)
Item Symbol Frame Rate -- 55 60 65 Hz Frame Period t1 803 823 1023 line Vertical Display Time t2 800 800 800 line Vertical Blanking Time t3 3 23 223 line 1 Line Scanning Time t4 1334 1440 1961 clock Horizontal Display Time t5 1280 1280 1280 clock Horizontal Blanking Time
t6 54 160 681 clock
Clock Rate t7 64.3 71.1 82 MHz
Timing Diagram of Interface Signal (DE mode)
Min. Typ. Max. Unit
(1)Vertical
NCLK
DE
0~5
R
0~5
G
0~5
B
NCLK
DE
0~5
R
0~5
G
0~5
B
t2
t4
www.jxlcd.com
www.jxlcd.com
X,1 X,2 X,3 X,Y
t7
1 2 3 4
5 6
t1
X,798
t4
t5 t6
1277 1278 1279 1280
1276
X,800
X,799
t3
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
VDD(3.3V)
VLED(7~21V)
Document Title HSD101PWW1 Standard Specification Page No. 17/26
Document No. DC170-007181 Revision 1.0
6.5 Power On / Off Sequence
TP1 TP12
10%
LVDS Interface Signal & Clock
LED dimming, PWM
LED_EN
www.jxlcd.com
www.jxlcd.com
Item Min. Typ. Max. Unit Remark
TP1 0.5 -- 10 msec TP2 0 -- 50 msec TP3 200 -- -- msec TP4 0.5 -- 10 msec TP5 10 -- -- msec TP6 10 -- -- msec TP7 0 -- -- msec TP8 10 -- -- msec
TP9 0 -- 10 msec TP10 200 -- -- msec TP11 0 -- 50 msec TP12 1 -- 10 msec TP13 1000 -- -- msec TP14 50 -- -- msec
90% 90%
TP2
TP3 TP10
TP4
90%
10%
TP6
TP5
TP8
TP14
TP9
90%
TP7
TP11
10%
TP13
10%
10%
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 18/26
Document No. DC170-007181 Revision 1.0
Note：：：：(1) The supply voltage of the external system for the module input should be the same
as the definition of VDD.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns
on before the LCD operation or the LCD truns off before the back-light turns off, the display may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or
keep a high impedance.
(4) TP13 should be measured after the module has been fully discharged between
power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on. (6) The duty of LED dimming signal should be more than 20% in TP6 and TP14 (7) PWM can adjust brightness to control Pin. Pulse duty the bigger the brighter
6.6 Backlight Unit Parameter Symbol Min Typ Max Units Condition
LED Current IF -- 16.25 -- mA
www.jxlcd.com
LED Voltage VF -- 2.9 3.0 Volt LED Power
consumption LED Life-Time N/A 10,000 -- -- Hour
Note (2): The LED lifetime defines as the estimated time to 50% degradation of final
www.jxlcd.com
P
--
LED
Note (1): Calculator value for reference P=IF x VF x N (LED Qty’)
luminous.
1.70 1.76
Watt
Ta=25℃ Ta=25℃ Ta=25℃
Note (1)
Ta=25℃
IF=16.25mA
Note (2)
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 19/26
Document No. DC170-007181 Revision 1.0
6.7 LED Driver
6.7.1
LED Power Supply voltage LED_EN, PWM pin Voltage
6.7.2 DC Electrical Characteristics
Absolute Maximum Ratings
Item Symbol Min. Max. Unit Note
V
-0.3 24 Volt
LED
VEN, V
PWM
Parameter Symbol Min Typ Max Units Remark
-- 5.5 Volt
LED Power Supply Voltage
LED_EN High Threshold
LED_EN Low Threshold
PWM High Threshold
PWM Low Threshold
PWM Frequency PWM Duty Cycle
www.jxlcd.com
www.jxlcd.com
Note (1): PWM Duty Cycle
V
V V
V
PWMH
V
PWML
F
LED
ENH
ENL
PWM
T
D
5.5 -- 21.0 Volt
2.0 -- -- Volt
-- -- 0.3 Volt
2.0 -- -- Volt
-- -- 0.15 Volt
--
200
10 -- 100 % Note(1)
1K
Hz
Duty Cycle = (t / T) *100%
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
T
t
HannStar Display Corp.
t shall not
Dimming
Signal
, PWM
LED Enable
, LED_EN
0.9V
0.9V
T3
Document Title HSD101PWW1 Standard Specification Page No. 20/26
Document No. DC170-007181 Revision 1.0
6.7.3 LED Power on/off sequence
LED Power Supply, V
0V
0V
0V
www.jxlcd.com
www.jxlcd.com
0.1V
LED
LED
T1 T2 T4 T5
0.1V
LED
Symbol
T1 T2 T3 T4 T5
Min Typ Max
10 -- -­10 -- -­50 -- --
0 -- --
10 -- --
Value
Unit
ms
Note (1): The duty of LED dimming signal should be more than 20% in T2 and T3 Note (2): PWM can adjust brightness to control Pin. Pulse duty the bigger the brighter
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
C(30min),100 cycles
100
20 40
50
Document Title HSD101PWW1 Standard Specification Page No. 21/26
Document No. DC170-007181 Revision 1.0
7.0 Reliability test items
No.
1 High Temperature Storage Ta=+60oC, 240hrs 2 Low Temperature Storage Ta=-20oC, 240hrs
High Temperature Operation Ta=+50oC, 300hrs
3
Low Temperature Operation Ta=0oC, 300hrs
4 5 Thermal Cycling Test (non operation) -20oC(30min)→+60
Vibration
6
7 Shock
Storage / Operating temperature
www.jxlcd.com
www.jxlcd.com
Note .Max wet bulb temp.=39oC
Item Conditions Remark
o
Sine Wave
1.5G, 5~500Hz, XYZ 30min/each direction Half-Sine, 200G, 2ms, ±XYZ, 1time
-40
Humidity (%)
-20
90
80
60
40
Storage Range
20
10
0
0
Temperature (oC)
Operating Range
60
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 22/26
Document No. DC170-007181 Revision 1.0
8.0 OUTLINE DIMENSION
8.1 Front View Outline Dimension
nit : mm
www.jxlcd.com
8.2 Back View Outline Dimension
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Document Title HSD101PWW1 Standard Specification Page No. 23/26
Document No. DC170-007181 Revision 1.0
9.0 LOT MARK
9.1 Lot Mark
1
Code 1,2,3,4,5,6: HannStar internal flow control code. Code 7: production location. Code 8: production year. Code 9: production month. Code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
Mark 6 7 8 9 0 1 2 3 4 5
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
www.jxlcd.com
9.2 Location of Lot Mark
www.jxlcd.com
(1) The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice.
HSD101PWW1 Rev: -A
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 24/26
Document No. DC170-007181 Revision 1.0
10.0 PACKAGE SPECIFICATION
10.1 Packing form
LCM Model LCM Qty. in the box
HSD101PWW1-A00
10.2 Packing assembly drawings
www.jxlcd.com
www.jxlcd.com
30 pcs/box 476*380*304(H)
Inner Box Size
(mm)
Notice
HSD101PWW1-A Material Notice
Box Corrugated Paper Board
Partition/Pad Corrugated Paper Board
Corner Pad Corrugated Paper Board
Tray PE --
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
AB Flute
B Flute B Flute
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 25/26
Document No. DC170-007181 Revision 1.0
11.0 GENERAL PRECAUTION
11.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.
11.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.
11.3 Breakage of LCD Panel
11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin.
11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately.
11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is
broken.
11.4 Electric Shock
www.jxlcd.com
www.jxlcd.com
11.4.1. Disconnect power supply before handling LCD module.
11.4.2. Do not pull or fold the LED cable.
11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector
or cables in order to prevent electric shock.
11.5 Absolute Maximum Ratings and Power Protection Circuit
11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.
11.5.2. Please do not leave LCD module in the environment of high humidity and high temperature for a long time.
11.5.3. It’s recommended to employ protection circuit for power supply.
11.6 Operation
11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly.
11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.
11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading.
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PWW1 Standard Specification Page No. 26/26
Document No. DC170-007181 Revision 1.0
11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent.
11.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
11.8 Static Electricity
11.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
11.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge. Persons who handle the module should be grounded through adequate methods.
11.9 Strong Light Exposure The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
11.10 Disposal
When disposing LCD module, obey the local environmental regulations.
www.jxlcd.com
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use