How it Works
HannStar
Loading...
HSD101PFW3-A
Product Specification
28 pgs680.83 Kb0

HannStar HSD101PFW3-A Product Specification

Download
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 1/28
Document No. DC170-006524 Revision 1.0
TO :
Date :
Customer Acceptance Specification
Model: HSD101PFW3
www.jxlcd.com
www.jxlcd.com
-A++
Accepted by:
Note:
1. Please contact HannStar Display Corp. before designing your product based on this module specification.
2. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that may result from application based on the module described herein.
Signature Date
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 2/28
Document No. DC170-006524 Revision 1.0
Record of Revisions
Rev.
1.0 Nov, 30, 2010
Date Sub-Model
www.jxlcd.com
www.jxlcd.com
A**
Description of change
Formal specification was first released
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 3/28
Document No. DC170-006524 Revision 1.0
Contents
1.0 General description ………………………………… p.4
2.0 Absolute maximum ratings……………………………. p.5
3.0 Optical characteristics.………………………………. p.6
4.0 Block diagram ……………………………………… p.10
5.0 Interface pin connection …………………………… p.12
6.0 Electrical characteristics …………………………… p.15
7.0 Reliability test items ………………………………… p.22
8.0 Outline dimension …………………………………… p.23
9.0 Lot mark ……………………………………………... p.25
10.0 Package specification ……………………………… p.26
www.jxlcd.com
11.0 General precaution …………………………………… p.27
www.jxlcd.com
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 4/28
Document No. DC170-006524 Revision 1.0
1.0 GENERAL DESCRIPTION
1.1 Introduction
HannStar Display model HSD101PFW3-A** is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 10.1 (16:9) inch diagonally measured active display area with WSVGA (1024 horizontal by 600 vertical pixel) resolution.
1.2 Features
■ 10.1 (16:9 diagonal) inch configuration
■ One channel LVDS interface
■ 262K color by 6 bit R.G.B signal input
■ RoHS Compliance
■ Halogen Free
1.3 Applications
Mobile NB Digital Photo frame Display terminal for AV application
1.4 General information
Item Specification Unit
www.jxlcd.com
Outline Dimension 243x 146.5 (typ) w/ Bracket & PCB mm
www.jxlcd.com
Display area 222.72(H) x 125.28(V) mm Number of Pixel 1024 RGB (H) x 600(V) pixels Pixel pitch 0.2175(H) x 0.2088(V) mm Pixel arrangement RGB Vertical stripe Display mode Normally white NTSC 50 % Surface treatment Glare, Hard-Coating (3H) Weight 160 (Max.) g Back-light White LED
Power Consumption 0.65 (Max)/Logic W
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 5/28
Document No. DC170-006524 Revision 1.0
1.5 Mechanical Information
Module
Size
Weight
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Electrical Absolute Rating
2.1.1 TFT LCD Module
LED Power Supply voltage Logic Supply voltage
2.2 Environment Absolute Rating
www.jxlcd.com
www.jxlcd.com
Operating Temperature T Storage Temperature T
Item Min. Typ. Max. Unit Remark Horizontal (H) 242.5 243 243.5 mm Vertical (V) 146 146.5 147 mm Depth (D)
Item Symbol Min. Max. Unit Note
Item Symbol Min. Max. Unit Note
－ －
V
-0.3 6.0 V GND=0
LED
VDD -0.3 6.0 V
0 50 ℃
opa
-20 60 ℃
stg
3.3 150 160 g
3.6 mm
W/ bracket
&PCB
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 6/28
Document No. DC170-006524 Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR
Tr
Response time
Tf
White luminance (5 point)
Color chromaticity
(CIE1931)
www.jxlcd.com
www.jxlcd.com
Viewing angle
Red
Green
Blue
White
Hor.
Ver.
YL 140 180
Rx RY Gx GY
Bx BY
Wx Wy
Θ
Θ
R
Θ
U
Θ
D
L
Θ=0
Normal viewing
angle
CR>10
400 500
－ －
0.555
0.302
0.259
0.487
0.099
0.061
0.263
0.279 40
40 10 30
12 24
0.605 0.655
0.352 0.402
0.309 0.359
0.537 0.587
0.149 0.199
0.111 0.161
0.313 0.363
0.329 0.379 45 45 15 35
－
4 8
－
－ －
－
－
(1)(2)(4)
msec
2
cd/m
(1)(4)
(1)(3)
(1)(4)(5)
Brightness uniformity B
Brightness Uniformity B
3.2 Measuring Condition
■ Measuring surrounding：dark room
■ Ambient temperature：25±2oC
■ 15min. warm-up time.
UNI
UNI
Θ=0
(5point)
Θ=0
(13 points)
be disclosed, distributed or reproduced in whole or in Corporation.
－ －
－ －
1.25
1.5
(5)
(6)
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
o
Document Title HSD101PFW3 Standard Specification Page No. 7/28
Document No. DC170-006524 Revision 1.0
3.3 Measuring Equipment
■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and BM-5A for other optical characteristics.
■ Measuring spot size：20 ~ 21 mm
Note (1) Definition of Viewing Angle:
Note (2) Definition of Contrast Ratio (CR) : measured at the center point of panel
Luminance with all pixels white CR = Luminance with all pixels black
www.jxlcd.com
www.jxlcd.com
Φ=180
Θ
L
6’ o’clock
Φ=270
Θ
D
Θ
U
12’ o’clock
Φ=90
Θ
o
o
R
Φ=0o
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 8/28
Document No. DC170-006524 Revision 1.0
Note (3) Definition of Response Time : Sum of TR and TF
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
R
100%
90%
Optical response
Note (4) Definition of optical measurement setup
www.jxlcd.com
www.jxlcd.com
10%
0%
T
F
time
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 9/28
Document No. DC170-006524 Revision 1.0
Note (5) Definition of Average Luminance Uniformity of White (5 Point)
Average Luminance Uniformity =
www.jxlcd.com
www.jxlcd.com
Y1+Y2+Y3+Y4+Y5
5
Note (6) Definition of brightness uniformity
Luminance uniformity =
Luminance uniformity =
(Max Luminance of 5 points) (Min Luminance of 5 points)
(Max Luminance of 13 points) (Min Luminance of 13 points)
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
B G
LED
Document Title HSD101PFW3 Standard Specification Page No. 10/28
Document No. DC170-006524 Revision 1.0
4.0 BLOCK DIAGRAM
4.1 TFT LCD Module:
Driver
Timing
X-driver IC
Connector
EDID
DC/DC
Converter
Controller
+
LVDS
Receiver
Liquid Crystal Panel
Y-driver IC
1024x600 pixels
www.jxlcd.com
www.jxlcd.com
Gray scale
Manipulation
Voltage
Generation
Circuit
4.2 Pixel Format
1,1
2,1
600,1
1,2 1,3 1,4
LCD Display Area
1 Pixel
R
R
1024 pixel (3072 Dots)
R
1,1024
600,
1024
600 Lines
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
scale of
Document Title HSD101PFW3 Standard Specification Page No. 11/28
Document No. DC170-006524 Revision 1.0
4.3 Relationship Between Displayed Color and Input
Basic color
Gray scale of Red
Gray scale of Green
Gray scale of Blue
Gray White &
Black
MSB LSB
Display
Black L L L L L L L L L L L L L L L L L L
Blue L L L L L L L L L L L L H H H H H H
Green L L L L L L H H H H H H L L L L L L
Light Blue L L L L L L H H H H H H H H H H H H
Red H H H H H H L L L L L L L L L L L L Purple H H H H H H L L L L L L H H H H H H Yellow H H H H H H H H H H H H L L L L L L
White H H H H H H H H H H H H H H H H H H
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Red H H H H H H L L L L L L L L L L L L Red L63
Black L L L L L L L L L L L L L L L L L L
Dark
www.jxlcd.com
Light
Green L L L L L L H H H H H H L L L L L L Green L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Blue L L L L L L L L L L L L H H H H H H Blue L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
White H H H H H H
R5 R4 R3 R2 R1 R0
L L L L L H L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L
↑ ↓
H H H H L H L L L L L L L L L L L L H H H H H L L L L L L L L L L L L L
L L L L L L L L L L L H L L L L L L L L L L L L L L L L H L L L L L L L
www.jxlcd.com
↑ ↓
L L L L L L H H H H L H L L L L L L L L L L L L H H H H H L L L L L L L
L L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L L L L H L
↑ ↓
L L L L L L L L L L L L H H H H L H L L L L L L L L L L L L H H H H H L
L L L L L H L L L L L H L L L L L H L L L L H L L L L L H L L L L L H L
↑ ↓
H H H H L H H H H H L H H H H H L H H H H H H L H H H H H L H H H H H L
: :
: :
: :
: :
MSB LSB G5 G 4 G3 G 2 G1 G0
: :
: :
: :
: :
H H H H H H H H H H H H White L63
MSB LSB B5 B 4 B3 B 2 B1 B 0
: :
: :
: :
: :
Gray scale
L3…L60
L3…L60
L3…L60
L3…L60
level
-
-
-
-
-
-
-
­L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 12/28
Document No. DC170-006524 Revision 1.0
5.0 INTERFACE PIN CONNECTION
5.1
TFT LCD Module：：：：
Pin Signal Description
1 GND Ground 2 AVDD PowerSupply,3.3V(typical) 3 AVDD PowerSupply,3.3V(typical) 4 DVDD DDC3.3V power
5 CABC_EN 6 SCL DDC Clock
7 SDA DDC Data 8 Rin0- - LVDSdifferential data input
9 Rin0+ + LVDSdifferential data input 10 GND Ground 11 Rin1- - LVDSdifferential data input 12 Rin1+ + LVDSdifferential data input 13 GND Ground 14 Rin2- - LVDSdifferential data input 15 Rin2+ + LVDSdifferential data input 16 GND Ground
www.jxlcd.com
17 ClkIN- - LVDSdifferential data input
www.jxlcd.com
18 ClkIN+ + LVDSdifferential data input 19 GND Ground 20 VDDA_EN VDDA on/off 21 NC No Connection 22 GND Ground 23 NC No Connection 24 NC No Connection 25 GND Ground 26 NC No Connection 27 NC No Connection 28 GND Ground 29 NC No Connection 30 NC No Connection 31 VLED_GND LED Ground 32 VLED_GND LED Ground 33 VLED_GND LED Ground 34 NC No Connection 35 PWM System PWM Signal Input 36 VLED_EN LED enable pin(+3.3V input)/VLED on/off
CN1 (Input signal): IPEX 20455-040E-12 (IPEX or equivalent)
CABC function enable/disable
Default 0: Disable
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 13/28
Document No. DC170-006524 Revision 1.0
37 NC No Connection 38 VLED LED Power Supply5V 39 VLED LED Power Supply5V 40 VLED LED Power Supply5V
Note：
：
The brightness of LCD panel could be changed by adjusting PWM
：：
[Note] (1) ADJ can adjust brightness to control Pin. Pulse duty the bigger the brighter.
Luminance
Luminance Bright
Luminance Dark
www.jxlcd.com
(2) ADJ Signal=0~3.3V，，，，Operation Conditions：：：：
www.jxlcd.com
Parameter Symbol
ADJ Logic-High Level V
ADJ Logic-Low Level V
Dimming Frequency F
Dimming Duty Cycle D 20 -- 100 %
Duty(0%) Duty(100%)
Conditions Min Typ Max Unit
1.8 3.3 3.6
ADJH
0 0 0.4 V
ADJL
18 20 22 kHz
ADJ
Duty
V
t
on
T
S
D= ton / TS x 100% F
= 1 / TS
ADJ
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 14/28
Document No. DC170-006524 Revision 1.0
(3) VLED_EN & VDDA_EN & CABC_EN ，，，，Operation Conditions：：：：
Parameter Symbol Min Typ Max Units Remark
LED enable pin (control LED driver circuit on/off)
VDD on/off signal (control Panel VDD power source on/off)
CABC on/off signal (control CABC Function on/off)
www.jxlcd.com
www.jxlcd.com
LED_EN (H)
LED_EN (L)
VDDA_EN (H)
VDDA_EN (L)
CABC_EN (H)
CABC_EN (L)
3.0 3.3 3.6 LED on
-- 0 0.2
3.0 3.3 3.6 VDD on
-- 0 0.2
3.0 3.3 3.6 CABC on
-- 0 0.2
Volt
LED off
Volt
VDD off
Volt
CABC off
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Supply Voltage
td
Document Title HSD101PFW3 Standard Specification Page No. 15/28
Document No. DC170-006524 Revision 1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module Item Symbol
VDD 3.0 3.3 3.6 V Note (1)
Current of power supply
Inrush current
Note ：
：
(1) V
：：
When VDD operating within 2.7V≦VDD<3.0V，td≦10ms , the display may momentarily become abnormal .
VDD<2.7V, VDD dip condition should also follow the Power On/Off conditions for supply
voltage.
www.jxlcd.com
www.jxlcd.com
(2) Maximum Measurement Condition: Black Pattern
(3) Typical Measurement Condition: Mosaic Pattern
dip condition :
DD-
IDD - 0.19 - A
I
RUSH
Min. Typ. Max. Unit
Ta=25℃ fv=60Hz
- - 1.50 A Note (4)
Note
VDD =3.3V
Note (2)(3)
VDD
GND
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
V
V
Document Title HSD101PFW3 Standard Specification Page No. 16/28
Document No. DC170-006524 Revision 1.0
(4) Power on Inrush current test circuit
www.jxlcd.com
12v
3.3v
www.jxlcd.com
DD
0.9VDD
0.1VDD
0V
0.5 ms
rising time
in
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
DE
2.5/7T
5.5/7T
Document Title HSD101PFW3 Standard Specification Page No. 17/28
Document No. DC170-006524 Revision 1.0
6.2 Switching Characteristics for LVDS Receiver
Item Symbol
Min. Typ.
Max. Unit
Conditions Differential Input High Threshold Vth Differential Input Low Threshold Vtl -100
Input Current Differential input Voltage
Common Mode Voltage Offset VCM 0.7
6.3 Bit Mapping & Interface Definition
www.jxlcd.com
www.jxlcd.com
RCLK
Rin0
7T
6.5/7T
4.5/7T
3.5/7T
1.5/7T
0.5/7T
R[2]
R[1]
R[0]
G[0]
I
IN
|VID|
－ －
－
-10
0.1
－
－
1.2
100 mV
－
+10 uA
0.6 V
1.6
mV
V
VCM=1.2V
R[5]
R[4]
R[3]
R[2]
R[1]
R[0]
G[0]
Rin1
G[3]
G[2]
G[1]
B[1]
B[0]
G[5]
G[4]
G[3]
G[2]
Rin2
B[4]
B[3]
B[2] DE
(VS) (HS)
B[5]
B[4]
B[3]
Pervious cycle Current cycle
LVDS Receiver Input Timing Definition
for 6bits LVDS input
be disclosed, distributed or reproduced in whole or in Corporation.
G[1]
B[2]
B[1]
Next cycle
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 18/28
Document No. DC170-006524 Revision 1.0
6.4 Interface Timing (DE mode)
Item Symbol Min. Typ. Max. Unit Frame Rate Frame Period t1 612 625 638 line Vertical Display Time t2 600 600 600 line Vertical Blanking Time t3 12 25 38 line 1 Line Scanning Time t4 1160 1200 1240 clock Horizontal Display Time t5 1024 1024 1024 clock Horizontal Blanking Time t6 136 176 216 clock Clock Rate t7 39 45 51.42 MHz
Timing Diagram of Interface Signal (DE mode)
www.jxlcd.com
www.jxlcd.com
-- 55 60 65 Hz
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
0V
TP5 TP6
0V
TP3 TP8
D
0V
TP2
0V
VDDA_EN
T
P11
TP9
0V
TP4
TP7
TP1
0
TP1
Document Title HSD101PFW3 Standard Specification Page No. 19/28
Document No. DC170-006524 Revision 1.0
6.5 Power On / Off Sequence
AVDD(3.3V) & VLED(5V)
LVDS Signal & Clock
LED dimming, PWM
www.jxlcd.com
www.jxlcd.com
LED_EN
0.9V
0.1V
DD
DD
Item Min. Typ. Max. Unit Remark TP1 0.5 -- 10 msec TP2 10 -- -- msec TP3 30 40 90 msec TP4 200 -- -- msec TP5 10 -- -- msec TP6 0 -- -- msec TP7 110 -- -- msec TP8 0 16 80 msec
TP9 0 -- -- msec Must exceed 0 TP10 -- 10 30 msec TP11 1000 -- -- msec
0.9V
0.1V
D
DD
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 20/28
Document No. DC170-006524 Revision 1.0
Note：(1) The supply voltage of the external system for the module input should be the same as the
definition of VDD.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on
before the LCD operation or the LCD truns off before the back-light turns off, the display may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or keep a
high impedance.
(4) TP4 should be measured after the module has been fully discharged between power off
and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
6.6 Backlight Unit Parameter Symbol Min Typ Max Units Condition
LED Current IF -- 17.5 18.55 mA
www.jxlcd.com
LED Voltage VF 3.0 3.2 3.4 Volt LED Power
consumption LED Life-Time N/A 10,000 -- -- Hour
Note (2): The LED lifetime defines as the estimated time to 50% degradation of final
6.7 LED Driver
www.jxlcd.com
P
--
LED
Note (1): Calculator value for reference P=IF x VF x N (LED Qty’)
luminous.
6.7.1 Absolute Maximum Ratings
Item Symbol Min. Max. Unit Note
LED Power Supply voltage LED_EN, PWM pin Voltage
V
LED
VEN, V
-0.3 6 Volt
PWM
1.34 1.51
-- 5.5 Volt
Watt
Ta=25℃ Ta=25℃ Ta=25℃
Note (1) Ta=25℃ IF=20mA
Note (2)
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
CABC_EN High
Document Title HSD101PFW3 Standard Specification Page No. 21/28
Document No. DC170-006524 Revision 1.0
6.7.2 DC Electrical Characteristics
Parameter Symbol Min Typ Max Units Remark
LED Power Supply Voltage
PWM High Threshold
PWM Low Threshold
6.8 CABC DC Electrical Characteristics
Parameter Symbol Min Typ Max Units Remark
Threshold CABC_EN Low
Threshold
www.jxlcd.com
www.jxlcd.com
V
CABCH
V
CABCL
V
V
PWMH
V
PWML
LED
0.7V
4.5 -- 5.5 Volt
3.0 -- -- Volt
-- -- 0.2 Volt
DD
-- -- 0.3V
-- -- Volt
DD
Volt
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
C(30min),100 cycles
0 20 40
Document Title HSD101PFW3 Standard Specification Page No. 22/28
Document No. DC170-006524 Revision 1.0
7.0 Reliability test items
No.
1 High Temperature Storage Ta=+60oC, 240hrs 2 Low Temperature Storage Ta=-20oC, 240hrs
High Temperature Operation Ta=+50oC, 500hrs
3
Low Temperature Operation Ta=0oC, 500hrs
4 5 Thermal Cycling Test (non operation) -20oC(30min)→+60
Vibration
6
7 Shock
Storage / Operating temperature
www.jxlcd.com
www.jxlcd.com
-40
Note .Max wet bulb temp.=39oC
Item Conditions Remark
Humidity (%)
Storage Range
-20
80
60
40
10
Operating Range
Temperature (oC)
o
Sine Wave
1.5G, 5~500Hz, XYZ 30min/each direction Half-Sine, 200G, 2ms, ±XYZ, 1time
50
60
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Up view (1:1)
Document Title HSD101PFW3 Standard Specification Page No. 23/28
Document No. DC170-006524 Revision 1.0
8.0 OUTLINE DIMENSION
8.1 Front View Outline Dimension
www.jxlcd.com
www.jxlcd.com
Detail A (2:1)
Detail B (2:1)
Detail C (2:1)
General tolerance: +/- 0.3
nit : mm
Detail D (2:1)
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 24/28
Document No. DC170-006524 Revision 1.0
8.2 Back View Outline Dimension
www.jxlcd.com
www.jxlcd.com
Detail F (2:1)
Detail E (2:1)
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
２
３
４
５
６
７
８
９
10
11
12
13
14
15
Rev
: -A**
EDX.X 6
A0
Document Title HSD101PFW3 Standard Specification Page No. 25/28
Document No. DC170-006524 Revision 1.0
9.0 LOT MARK
9.1 Lot Mark
１
Code 1,2,3,4,5,6: HannStar internal flow control code. Code 7: production location. Code 8: production year. Code 9: production month. Code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
Mark 6 7 8 9 0 1 2 3 4 5
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
www.jxlcd.com
Mark 1 2 3 4 5 6 7 8 9 A B C
www.jxlcd.com
9.2 Location of Lot Mark
(1) Location : The label is attached to the backside of the LCD module. See Product back
view. ( Section 8.0 : (2) Detail of the Mark : As attached below (3) This is subject to change without prior notice.
OUTLINE DIMENSION )
HSD101PFW3
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 26/28
Document No. DC170-006524 Revision 1.0
10.0 PACKAGE SPECIFICATION
10.1 Packing form
LCM Model LCM Qty. in the box Inner Box Size (mm) Notice
HSD101PFW3-A
10.2 Packing assembly drawings
30pcs/box
LCM+EPE+LCM
LCM+EPE+LCM
LCM+EPE+LCM
Tray(Face to Face)
Tray(Face to Face)
Tray(Face to Face)
Insert Top
Insert Top
Insert Top Cover w/
Cover w/
Cover w/ Flat Surface
Flat Surface
www.jxlcd.com
www.jxlcd.com
Seal the Box
Seal the Box With Tape
With Tape
Flat Surface Downward
Downward
Downward
565x316 x240 H
CLOSE Tray Cover
CLOSE Tray Cover
CLOSE Tray Cover Snap 5 Lock Points
Snap 5 Lock Points
Snap 5 Lock Points
Insert Trays to
Insert Trays to
Insert Trays to Partition Slot
Partition Slot
Partition Slot ( PCB side UP)
( PCB side UP)
( PCB side UP) 15 Trays/Box
15 Trays/Box
15 Trays/Box
.
.
.
be disclosed, distributed or reproduced in whole or in Corporation.
HSD101PFW3-A Material Notice
Box Corrugated Paper Board AB Flute
Partition/Pad Corrugated Paper Board B Flute
Pad Corrugated Paper Board B Flute Tray PE -­EPE PET --
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 27/28
Document No. DC170-006524 Revision 1.0
11.0 GENERAL PRECAUTION
11.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.
11.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.
11.3 Breakage of LCD Panel
11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin.
11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately.
11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is
broken.
11.4 Electric Shock
www.jxlcd.com
www.jxlcd.com
11.4.1. Disconnect power supply before handling LCD module.
11.4.2. Do not pull or fold the LED cable.
11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector
or cables in order to prevent electric shock.
11.5 Absolute Maximum Ratings and Power Protection Circuit
11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.
11.5.2. Please do not leave LCD module in the environment of high humidity and high temperature for a long time.
11.5.3. It’s recommended to employ protection circuit for power supply.
11.6 Operation
11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly.
11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.
be disclosed, distributed or reproduced in whole or in Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
Document Title HSD101PFW3 Standard Specification Page No. 28/28
Document No. DC170-006524 Revision 1.0
11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading.
11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent.
11.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
11.8 Static Electricity
11.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
11.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge. Persons who handle the module should be grounded through adequate methods.
11.9 Strong Light Exposure The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
11.10 Disposal
When disposing LCD module, obey the local environmental regulations.
www.jxlcd.com
www.jxlcd.com
be disclosed, distributed or reproduced in whole or in Corporation.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use