HannStar Display Corp.
Document Title HSD101PFW2-B Formal Specification Page No. 1/26
Document No. Revision 1.0
Date : 2010/6/29
Customer Acceptance Specification
Model: HSD101PFW2
-B00
www.jxlcd.com
www.jxlcd.com
Accepted by:
Proposed by: Technical Service Division
Signature Date
Note:
(1) Please contact HannStar Display Corp. before designing your product based on
this module specification.
(2) The information contained herein is presented merely to indicate the characteristics and
performance of our products. No responsibility is assumed by HannStar for any
intellectual property claims or other problems that may result from application based on
the module described herein.
(3) The mark “ ** ” of Model means sub-model code.
Signature Date
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 2/26
Document No. Revision 1.0
Record of Revisions
Rev.
1.0
Date Sub-Model
2010/6/29 B00 Formal Product Specification was first released.
www.jxlcd.com
www.jxlcd.com
Description of change
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 3/26
Document No. Revision 1.0
Contents
1.0 General description ………………………………… p.4
2.0 Absolute maximum ratings……………………………. p.5
3.0 Optical characteristics.………………………………. p.6
4.0 Block diagram ……………………………………… p.10
5.0 Interface pin connection …………………………… p.12
6.0 Electrical characteristics …………………………… p.13
7.0 Reliability test items ………………………………… p.20
8.0 Outline dimension …………………………………… p.21
9.0 Lot mark ……………………………………………... p.23
10.0 Package specification ……………………………… p.24
www.jxlcd.com
11.0 General precaution …………………………………… p.25
www.jxlcd.com
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 4/26
Document No. Revision 1.0
1.0 GENERAL DESCRIPTION
1.1 Introduction
HannStar Display model HSD101PFW2-B is a color active matrix thin film
transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a
switching device. This model is composed of a TFT LCD panel, a driving circuit
and a back light system. This TFT LCD has a 10.1 (16:9) inch diagonally
measured active display area with WSVGA (1024 horizontal by 600 vertical pixel)
resolution.
1.2 Features
■ 10.1 (16:9 diagonal) inch configuration
■ One channel LVDS interface
■ 262K color by 6 bit R.G.B signal input
■ RoHS Compliance
■ Halogen Free
1.3 Applications
Mobile NB
Digital Photo frame
Display terminal for AV application
1.4 General information
www.jxlcd.com
www.jxlcd.com
Outline Dimension 235 x 143 x 4.9 (Typ.) mm
Display area 222.72(H) x 125.28(V) mm
Number of Pixel 1024 RGB (H) x 600(V) pixels
Pixel pitch 0.2175(H) x 0.2088(V) mm
Pixel arrangement RGB Vertical stripe
Display mode Normally white
NTSC 50 %
Surface treatment Anti-Glare, Hard-Coating (3H)
Weight 175 (Typ.) g
Back-light White LED
Item Specification Unit
Power Consumption 0.65W (Max.)/Logic W
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 5/26
Document No. Revision 1.0
1.5 Mechanical Information
Module
Size
Weight
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Electrical Absolute Rating
2.1.1 TFT LCD Module
Logic Supply voltage
2.1.2 Environment Absolute Rating
Operating Temperature T
Storage Temperature T
www.jxlcd.com
www.jxlcd.com
Item Min. Typ. Max. Unit
Horizontal (H) 234.5 235 235.5 mm
Vertical (V) 142.5 143 143.5 mm
Depth (D)
Item Symbol Min. Max. Unit Note
VDD -0.3 4.0 V
Item Symbol Min. Max. Unit Note
－
－
0 50
opa
-20 60
stg
4.9
175 185 g
5.2 mm
℃
℃
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 6/26
Document No. Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
－
Contrast CR
Tr
Response time
Tf
400 500
－
－
4 8
12 24
(1)(2)(4)
msec
(1)(3)
White luminance
(5 point)
Red
Color
chromaticity
(CIE1931)
www.jxlcd.com
www.jxlcd.com
Viewing angle
Brightness uniformity B
Brightness Uniformity B
3.2 Measuring Condition
■ Measuring surrounding：dark room
■ Ambient temperature：25±2oC
■ 15min. warm-up time.
Green
Blue
White
Hor.
Ver.
YL 160 200
Rx
RY
Gx
GY
Bx
BY
Wx
Wy
Θ
Θ
Θ
Θ
UNI
UNI
L
R
CR>10
U
D
(13 points)
Θ=0
Normal
viewing
angle
Θ
=0
(5point)
Θ
=0
0.542
0.305
0.277
0.505
0.104
0.044
0.263
0.279
40
40
10
30
80
70
0.592 0.642
0.355 0.405
0.327 0.377
0.555 0.605
0.154 0.204
0.094 0.144
0.313 0.363
0.329 0.379
45
45
15
35
－
－
(1)(4)(5)
－
－
－
－
－
－
－
2
cd/m
(1)(4)
(IL=18mA)
% (5)
% (6)
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
o
Document Title HSD101PFW2-B Formal Specification Page No. 7/26
Document No. Revision 1.0
3.3 Measuring Equipment
■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity
and BM-5A for other optical characteristics.
■ Measuring spot size：20 ~ 21 mm
Note (1) Definition of Viewing Angle:
Note (2) Definition of Contrast Ratio (CR) :
measured at the center point of panel
Luminance with all pixels white
CR =
Luminance with all pixels black
www.jxlcd.com
www.jxlcd.com
Φ=180
Θ
L
6’ o’clock
Φ=270
Θ
D
Θ
U
12’ o’clock
Φ=90
Θ
o
o
R
Φ=0o
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 8/26
Document No. Revision 1.0
Note (3) Definition of Response Time : Sum of TR and TF
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
R
100%
90%
Optical
response
Note (4) Definition of optical measurement setup
www.jxlcd.com
www.jxlcd.com
10%
0%
T
F
time
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 9/26
Document No. Revision 1.0
Note (5) Definition of Average Luminance Uniformity of White (5 Point)
Average Luminance Uniformity =
www.jxlcd.com
www.jxlcd.com
Y1+Y2+Y3+Y4+Y5
5
Note (6) Definition of brightness uniformity
Luminance uniformity(13points) = ×100%
Luminance uniformity(5 points) = ×100%
(Min Luminance of 5 points)
(Max Luminance of 5 points)
(Min Luminance of 13 points)
(Max Luminance of 13 points)
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
1024 pixel (3072 Dots)
B G
LED
Document Title HSD101PFW2-B Formal Specification Page No. 10/26
Document No. Revision 1.0
4.0 BLOCK DIAGRAM
4.1 TFT LCD Module:
X-driver IC
Driver
Timing
Connector
EDID
DC/DC
Converter
Controller
+
LVDS
Receiver
Liquid Crystal Panel
Y-driver IC
1024x600 pixels
www.jxlcd.com
www.jxlcd.com
4.2 Pixel Format
1,1
2,1
600,1
1,2 1,3 1,4
Gray scale
Manipulation
Voltage
Generation
Circuit
LCD Display Area
1 Pixel
R
R
R
1,1024
600,
1024
600 Lines
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
scale of
Document Title HSD101PFW2-B Formal Specification Page No. 11/26
Document No. Revision 1.0
4.3 Relationship Between Displayed Color and Input
Basic
color
Gray
scale
of Red
Gray
scale of
Green
Gray
scale of
Blue
Gray
White &
Black
MSB LSB
Display
Black L L L L L L L L L L L L L L L L L L
Blue L L L L L L L L L L L L H H H H H H
Green L L L L L L H H H H H H L L L L L L
Light Blue L L L L L L H H H H H H H H H H H H
Red H H H H H H L L L L L L L L L L L L
Purple H H H H H H L L L L L L H H H H H H
Yellow H H H H H H H H H H H H L L L L L L
White H H H H H H H H H H H H H H H H H H
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Red H H H H H H L L L L L L L L L L L L Red L63
Black L L L L L L L L L L L L L L L L L L
Dark
www.jxlcd.com
Light
Green L L L L L L H H H H H H L L L L L L Green L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Blue L L L L L L L L L L L L H H H H H H Blue L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
White H H H H H H H H H H H H H H H H H H White L63
R5 R4 R3 R2 R1 R0
L L L L L H L L L L L L L L L L L L
L L L L H L L L L L L L L L L L L L
↑
↓
H H H H L H L L L L L L L L L L L L
H H H H H L L L L L L L L L L L L L
L L L L L L L L L L L H L L L L L L
L L L L L L L L L L H L L L L L L L
↑
www.jxlcd.com
↓
L L L L L L H H H H L H L L L L L L
L L L L L L H H H H H L L L L L L L
L L L L L L L L L L L L L L L L L H
L L L L L L L L L L L L L L L L H L
↑
↓
L L L L L L L L L L L L H H H H L H
L L L L L L L L L L L L H H H H H L
L L L L L H L L L L L H L L L L L H
L L L L H L L L L L H L L L L L H L
↑
↓
H H H H L H H H H H L H H H H H L H
H H H H H L H H H H H L H H H H H L
:
:
:
:
:
:
:
:
MSB LSB
G5 G 4 G3 G2 G1 G 0
:
:
:
:
:
:
:
:
MSB LSB
B5 B4 B3 B2 B1 B0
:
:
:
:
:
:
:
:
Gray scale
L3…L60
L3…L60
L3…L60
L3…L60
level
-
-
-
-
-
-
-
L0
L1
L2
L61
L62
L0
L1
L2
L61
L62
L0
L1
L2
L61
L62
L0
L1
L2
L61
L62
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 12/26
Document No. Revision 1.0
5.0 INTERFACE PIN CONNECTION
5.1
TFT LCD Module
Pin No. Signal Description
1 NC No Connection
2 VCC 3.3V Power Supply
3 VCC 3.3V Power Supply
4 V_EDID EDID 3.3V Power Supply
5 NC No Connection
6 CLK_EDID EDID Clock
7 DATA_EDID EDID Data
8 RXIN0- LVDS Signal - channel0-
9 RXIN0+ LVDS Signal+ channel0+
10 GND Ground
11 RXIN1- Data Input channel112 RXIN1+ Data Input channel1+
13 GND Ground
14 RXIN2- Data Input channel215 RXIN2+ Data Input channel2+
16 GND Ground
17 RXCLKIN- Data Input CLK18 RXCLKIN+ Data Input CLK+
19 GND Ground
www.jxlcd.com
www.jxlcd.com
Note
20 NC No Connection
21 NC No Connection
22 GND Ground
23 NC No Connection
24 NC No Connection
25 GND Ground
26 NC No Connection
27 NC No Connection
28 GND Ground
29 NC No Connection
30 NC No Connection
31 VLED_GND LED Ground
32 VLED_GND LED Ground
33 VLED_GND LED Ground
34 NC No Connection
35 PWM PWM Signal for LED dimming control
36 LED_EN LED Enable Pin (+3V Input)
37 NC No Connection
38 VLED LED Power Supply 5-21V
39 VLED LED Power Supply 5-21V
40 VLED LED Power Supply 5-21V
：
The brightness of LCD panel could be changed by adjusting PWM
：
：：
：
CN1 (Input signal): IPEX 20455-040E-12 (IPEX or equivalent)
：
：：
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Supply Voltage
3.0v
td
Document Title HSD101PFW2-B Formal Specification Page No. 13/26
Document No. Revision 1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module
Item Symbol
VDD 3.0 3.3 3.6 V Note (1)
Current of
power supply
Inrush current
Note (1): V
When VDD operating within 2.7V≦VDD<3.0V，td≦10ms , the display may
VDD<2.7V , VDD dip condition should also follow the Power On/Off
www.jxlcd.com
www.jxlcd.com
DD-
momentarily become abnormal.
conditions for supply voltage.
IDD - 0.192 - A
I
RUSH
dip condition:
Min. Typ. Max. Unit
VDD =3.3V、L0 pattern
Ta=25℃ fv=60Hz
- - 1.50 A Note (2)
Note
VDD
GND
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
V
V
Document Title HSD101PFW2-B Formal Specification Page No. 14/26
Document No. Revision 1.0
Note
www.jxlcd.com
：
(2) Power on Inrush current test circuit
：
：：
www.jxlcd.com
DD
0.9VDD
0.1VDD
0V
0.5 ms
rising time
in
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
2.5/7T
5.5/7T
Document Title HSD101PFW2-B Formal Specification Page No. 15/26
Document No. Revision 1.0
6.2 Switching Characteristics for LVDS Receiver
Item Symbol Min. Typ.
Max. Unit Conditions
Differential Input High Threshold Vth
Differential Input Low Threshold
Input Current
Differential input Voltage
Common Mode Voltage Offset VCM (|VID|/2)
6.3 Bit Mapping & Interface Definition
7T
6.5/7T
4.5/7T
3.5/7T
1.5/7T
0.5/7T
RCLK
www.jxlcd.com
www.jxlcd.com
Rin0
R[2]
R[1]
R[0]
Vtl -100
I
IN
|VID|
G[0]
R[5]
－
-10
0.1
R[4]
－
－
－
－
1.25
100 mV
－
mV
+10 uA
0.6 V
2.4-(|VID|/2) V
R[3]
R[2]
R[1]
R[0]
VCM=1.2V
G[0]
Rin1
G[3]
G[2]
G[1]
B[1]
B[0]
G[5]
G[4]
G[3]
G[2]
Rin2
B[4]
B[3]
B[2] DE
(VS)
(HS)
B[5]
B[4]
B[3]
Pervious cycle Current cycle
LVDS Receiver Input Timing Definition
for 6bits LVDS input
G[1]
B[2] DE
Next cycle
B[1]
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 16/26
Document No. Revision 1.0
6.4 Interface Timing (DE mode)
Item Symbol Min. Typ. Max. Unit
Frame Rate
Frame Period t1 612 625 638 line
Vertical Display Time t2 600 600 600 line
Vertical Blanking Time t3 12 25 38 line
1 Line Scanning Time t4 1160 1200 1240 clock
Horizontal Display Time t5 1024 1024 1024 clock
Horizontal Blanking Time t6 136 176 216 clock
Clock Rate t7 39 45 51.42 MHz
Timing Diagram of Interface Signal (DE mode)
www.jxlcd.com
www.jxlcd.com
-- 55 60 65 Hz
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
0.9V
DD
0.6V
0.6V
50%
Document Title HSD101PFW2-B Formal Specification Page No. 17/26
Document No. Revision 1.0
6.5 Power On / Off Sequence
Power Supply
Power On
Power
Off
0.9V
DD
0.1V
DD
0V
Signal
0V
Backlight
(Recommended
www.jxlcd.com
www.jxlcd.com
TP1
TP2
TP5
)
Item Min. Typ. Max. Unit Remark
TP1 0.5 -- 10 msec
TP2 0 -- 50 msec
TP3 0 -- 50 msec
TP4 500 -- -- msec
TP5 200 -- -- msec
TP6 200 -- -- msec
TP3
TP6
50%
0.1V
DD
TP4
0.1V
DD
Note
：
(1) The supply voltage of the external system for the module input should be the same
：
：：
as the definition of VDD.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns
on before the LCD operation or the LCD truns off before the back-light turns off, the
display may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or
keep a high impedance.
(4) TP4 should be measured after the module has been fully discharged between
power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 18/26
Document No. Revision 1.0
6.6 Backlight Unit
Parameter Symbol
LED Current IF -- 18.0 18.75 mA
LED Voltage VF 3.0 3.2 3.4 Volt
P
LED Power
consumption
LED Life-Time
Note (1): Calculator value for reference P=IF x VF x N (LED Qty’)
Note (2): The LED lifetime defines as the estimated time to 50% degradation of final
luminous.
6.7 LED Driver
6.7.1 Absolute Maximum Ratings
Item Symbol Min. Max. Unit Note
LED Power Supply voltage
www.jxlcd.com
www.jxlcd.com
LED_EN, PWM pin Voltage
6.7.2 DC Electrical Characteristics
--
LED
N/A 10,000 -- -- Hour
Min Typ Max Units Condition
Ta=25℃
Ta=25℃
V
LED
VEN, V
1.38 1.53
-0.3 24 Volt
PWM
-- 5.5 Volt
Watt
Ta=25℃
Note (1)
Ta=25℃
IF=18mA
Note (2)
Parameter Symbol Min Typ Max Units Remark
LED Power
Supply Voltage
LED_EN High
Threshold
LED_EN Low
Threshold
PWM High
Threshold
PWM Low
Threshold
PWM Frequency
PWM Duty Cycle
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
V
V
V
V
PWMH
V
PWML
F
LED
ENH
ENL
PWM
T
D
5.0 -- 21.0 Volt
2.0 -- -- Volt
-- -- 0.3 Volt
3.0 -- -- Volt
-- -- 0.2 Volt
--
200
10 -- -- % Note(1)
300
Hz
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Dimming
Signal
, PWM
LED Enable
, LED_EN
0.9V
0.9V
T3
T
t
Document Title HSD101PFW2-B Formal Specification Page No. 19/26
Document No. Revision 1.0
Note(1): PWM Duty Cycle. Pulse duty the bigger the brighter.
Duty Cycle TD= (t / T) x 100%
6.7.3 LED Power on/off sequence
LED Power Supply, V
LED
T1 T2 T4 T5
0.1V
0V
LED
0.1V
LED
www.jxlcd.com
www.jxlcd.com
0V
0V
Symbol
T1
T2
T3
T4
T5
Note: The duty of LED dimming signal should be more than 20% in T2 and T3
Min Typ Max
10 -- -10 -- -50 -- --
0 -- --
10 -- --
Value
Unit
ms
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
C(30min),100 cycles
100
20 40
50
Document Title HSD101PFW2-B Formal Specification Page No. 20/26
Document No. Revision 1.0
7.0 Reliability test items
No.
1 High Temperature Storage Ta=+60oC, 240hrs
2 Low Temperature Storage Ta=-20oC, 240hrs
High Temperature Operation Ta=+50oC, 500hrs
3
Low Temperature Operation Ta=0oC, 500hrs
4
5 Thermal Cycling Test (non operation) -20oC(30min)→+60
Vibration
6
7 Shock
Storage / Operating temperature
www.jxlcd.com
www.jxlcd.com
Note .Max wet bulb temp.=39oC
Item Conditions Remark
o
Sine Wave
1.5G, 5~500Hz, XYZ
30min/each direction
Half-Sine, 200G, 2ms, ±XYZ, 1time
-40
Humidity (%)
-20
90
80
60
40
Storage Range
20
10
0
0
Temperature (oC)
Operating Range
60
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 21/26
Document No. Revision 1.0
8.0 OUTLINE DIMENSION
8.1 Front View Outline Dimension (2009/7/10 update)
www.jxlcd.com
www.jxlcd.com
Suggesti on screw spec.-- 2*
BM Assembly Tolerance
| A-A’ | ≤ 1 (mm)
| B-B’ | ≤ 1 (mm)
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 22/26
Document No. Revision 1.0
8.2 Back View Outline Dimension (2009/3/18 update)
www.jxlcd.com
www.jxlcd.com
H
S
D
B
A
R
C
O
D
E
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Rev
: *
-B
EDX.X 6 A0
Document Title HSD101PFW2-B Formal Specification Page No. 23/26
Document No. Revision 1.0
9.0 LOT MARK
9.1 Lot Mark
1
Code 1,2,3,4,5,6: HannStar internal flow control code.
Code 7: production location.
Code 8: production year.
Code 9: production month.
Code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
Mark 6 7 8 9 0 1 2 3 4 5
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
www.jxlcd.com
9.2 Location of Lot Mark
www.jxlcd.com
(1) Location : The label is attached to the backside of the LCD module. See Product back
view. ( Section 8.0 :
(2) Detail of the Mark : As attached below
(3) This is subject to change without prior notice.
OUTLINE DIMENSION )
HSD101PFW2
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 24/26
Document No. Revision 1.0
10.0 PACKAGE SPECIFICATION
10.1
Packing form
LCM Model LCM Qty. in the box
HSD101PFW2-B
10.2 Packing assembly drawings
Inner Box Size
50 pcs/box
www.jxlcd.com
www.jxlcd.com
460 x 316 x 321
(mm)
H
Notice
HSD101PFW2-B Material Notice
Box Corrugated Paper Board
Partition/Pad Corrugated Paper Board
Corner Pad Corrugated Paper Board
ESD bag PE --
(AB Flute)
(B Flute)
(AB Flute)
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 25/26
Document No. Revision 1.0
11.0 GENERAL PRECAUTION
11.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control
systems, military systems and any other application where performance failure could be
life-threatening or otherwise catastrophic.
11.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD
module, and may cause scratches or dust on the display. HannStar does not warrant the
module, if customers disassemble or modify the module.
11.3 Breakage of LCD Panel
11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid
crystal, and do not contact liquid crystal with skin.
11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately.
11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is
broken.
11.4 Electric Shock
www.jxlcd.com
www.jxlcd.com
11.4.1. Disconnect power supply before handling LCD module.
11.4.2. Do not pull or fold the LED cable.
11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector
or cables in order to prevent electric shock.
11.5 Absolute Maximum Ratings and Power Protection Circuit
11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental
temperature, etc., otherwise LCD module may be damaged.
11.5.2. Please do not leave LCD module in the environment of high humidity and high
temperature for a long time.
11.5.3. It’s recommended to employ protection circuit for power supply.
11.6 Operation
11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons
handle the LCD module for incoming inspection or assembly.
11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft
material.
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
Document Title HSD101PFW2-B Formal Specification Page No. 26/26
Document No. Revision 1.0
11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color
fading.
11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little
petroleum benzine or other adequate solvent.
11.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
11.8 Static Electricity
11.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
11.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is
very weak to electrostatic discharge. Please be careful with electrostatic
discharge. Persons who handle the module should be grounded through
adequate methods.
11.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
www.jxlcd.com
11.10 Disposal
When disposing LCD module, obey the local environmental regulations.
www.jxlcd.com
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Loading...