HannStar HSD101PFW1-A00 Product Specification

HannStar Display Corp.

or reproduced in whole or in part without written

Document Title HSD101PFW1 Specification for Wealth Star Page No. 2/26

Document No. DC170-006152 Revision 1.0

Record of Revisions

Rev.

1.0

Date Sub-Model

Sep, 14, 2010

www.jxlcd.com

A00

Customer Acceptance Specification of HSD101PFW1 was 1 released

Description of change

st

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed Corporation.

permission of HannStar Display

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 3/26

Document No. DC170-006152 Revision 1.0

Contents

1.0 General description ………………………………… p.5

2.0 Absolute maximum ratings……………………………. p.6

3.0 Optical characteristics.………………………………. p.7

4.0 Block diagram ……………………………………… p.11

5.0 Interface pin connection …………………………… p.13

6.0 Electrical characteristics …………………………… p.14

7.0 Reliability test items ………………………………… p.21

8.0 Outline dimension …………………………………… p.22

9.0 Lot mark ……………………………………………... p.24

10.0 Package specification ……………………………… p.25

www.jxlcd.com

11.0 General precaution …………………………………… p.26

www.jxlcd.com

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 4/26

Document No. DC170-006152 Revision 1.0

1.0 GENERAL DESCRIPTION

1.1 Introduction

HannStar Display model HSD101PFW1-A is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 10.1 (16:9) inch diagonally measured active display area with WSVGA (1024 horizontal by 576 vertical pixel) resolution.

1.2 Features

■ 10.1 (16:9 diagonal) inch configuration

■ One channel LVDS interface

■ 262K color by 6 bit R.G.B signal input

■ RoHS Compliance

■ Halogen Free

1.3 Applications

 Mobile NB  Digital Photo frame  Display terminal for AV application

1.4 General information

www.jxlcd.com

Outline Dimension 235 x 143 x 4.9 (Typ.) mm Display area 222.72(H) x 125.28(V) mm Number of Pixel 1024 RGB (H) x 576(V) pixels Pixel pitch 0.2175(H) x 0.2175(V) mm Pixel arrangement RGB Vertical stripe Display mode Normally white NTSC 50 % Surface treatment Anti-Glare, Hard-Coating (3H) Weight 185 (Typ.) g Back-light White LED

Power Consumption

Item Specification Unit

Logic System 1.0 (Max.) W B/L System 2.3 (Max.) W

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 5/26

Document No. DC170-006152 Revision 1.0

1.5 Mechanical Information

Module

Size

Weight

2.0 ABSOLUTE MAXIMUM RATINGS

2.1 Electrical Absolute Rating

2.1.1 TFT LCD Module

Logic Supply voltage

2.1.2 Environment Absolute Rating

Operating Temperature T Storage Temperature T

www.jxlcd.com

Item Min. Typ. Max. Unit Horizontal (H) 234.5 235 235.5 mm Vertical (V) 142.5 143 143.5 mm Depth (D)

Item Symbol Min. Max. Unit Note

VDD -0.3 4.0 V

Item Symbol Min. Max. Unit Note

－－

0 50

opa

-20 60

stg

4.9 185 195 g

5.2 mm

℃ ℃

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 6/26

Document No. DC170-006152 Revision 1.0

3.0 OPTICAL CHARACTERISTICS

3.1 Optical specification

Item Symbol Condition Min. Typ. Max. Unit Note

－

Contrast CR

Response time

Rising Tr Falling

Tf

400 500

－

2 4 6 12

(1)(2)(4)

msec

(1)(3)

White luminance (5 point)

Red

Color chromaticity

(CIE1931)

www.jxlcd.com

Viewing angle

Brightness uniformity B

Brightness Uniformity B

3.2 Measuring Condition

■ Measuring surrounding：dark room

■ LED current I

■ Ambient temperature：25±2oC

■ 15min. warm-up time.

Green

Blue

White

Hor.

Ver.

YL 160 200

L

CR>10

(13 points)

Θ=0

Normal viewing

angle

(5point)

Rx RY Gx

GY

Bx BY

Wx Wy

Θ Θ

R

Θ

U

Θ

D

UNI

：

20mA / signal LED

L

Θ

=0

0.581

0.336

0.330

0.545

0.123

0.089

0.283

0.299 40 45 40 45 10 15 30 35

80

70

－

0.611 0.641

0.366 0.396

0.360 0.390

0.575 0.605

0.153 0.183

0.119 0.149

0.313 0.343

0.329 0.359

－－

－

cd/m

(1)(4)

(IL=20mA)

% (5)

% (6)

(1)(4)(5)

2

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 7/26

Document No. DC170-006152 Revision 1.0

3.3 Measuring Equipment

■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and BM-5A for other optical characteristics.

■ Measuring spot size：20 ~ 21 mm

Note (1) Definition of Viewing Angle:

Note (2) Definition of Contrast Ratio (CR) : measured at the center point of panel

Luminance with all pixels white CR = Luminance with all pixels black

www.jxlcd.com

Φ=180o

Θ

L

6’ o’clock

Φ=270

Θ

D

Θ

U

12’ o’clock

Φ=90

Θ

o

R

Φ=0o

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 8/26

Document No. DC170-006152 Revision 1.0

Note (3) Definition of Response Time : Sum of TR and TF

white(TFT OFF) black (TFT ON) white(TFT OFF)

T

R

100%

90%

Optical response

Note (4) Definition of optical measurement setup

www.jxlcd.com

10%

0%

T

F

time

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 9/26

Document No. DC170-006152 Revision 1.0

Note (5) Definition of Average Luminance Uniformity of White (5 Point)

Average Luminance Uniformity =

www.jxlcd.com

Y1+Y2+Y3+Y4+Y5

5

Note (6) Definition of brightness uniformity

Luminance uniformity(13points) = ×100%

Luminance uniformity(5 points) = ×100%

(Min Luminance of 5 points) (Max Luminance of 5 points)

(Min Luminance of 13 points) (Max Luminance of 13 points)

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

LED

Document Title HSD101PFW1 Specification for Wealth Star Page No. 10/26

Document No. DC170-006152 Revision 1.0

4.0 BLOCK DIAGRAM

4.1 TFT LCD Module:

X-driver IC

Driver

Timing

Connector

EDID

DC/DC

Converter

Controller

+

LVDS

Receiver

Liquid Crystal Panel

Y-driver IC

1024x576 pixels

www.jxlcd.com

4.2 Pixel Format

1,1

2,1

576,1

1,2 1,3 1,4

Gray scale

Manipulation

Voltage

Generation

Circuit

1024 pixel (3072 Dots)

LCD Display Area

1 Pixel

R B G

R

1,1024

576,

1024

576 Lines

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

scale of

Document Title HSD101PFW1 Specification for Wealth Star Page No. 11/26

Document No. DC170-006152 Revision 1.0

4.3 Relationship Between Displayed Color and Input

Basic color

Gray scale of Red

Gray scale of Green

Gray scale of Blue

Gray White &

Black

MSB LSB

Display

Black L L L L L L L L L L L L L L L L L L

Blue L L L L L L L L L L L L H H H H H H

Green L L L L L L H H H H H H L L L L L L

Light Blue L L L L L L H H H H H H H H H H H H

Red H H H H H H L L L L L L L L L L L L Purple H H H H H H L L L L L L H H H H H H Yellow H H H H H H H H H H H H L L L L L L

White H H H H H H H H H H H H H H H H H H

Black L L L L L L L L L L L L L L L L L L

Dark

Light

Red H H H H H H L L L L L L L L L L L L Red L63

Black L L L L L L L L L L L L L L L L L L

Dark

www.jxlcd.com

Light

Green L L L L L L H H H H H H L L L L L L Green L63

Black L L L L L L L L L L L L L L L L L L

Dark

Light

Blue L L L L L L L L L L L L H H H H H H Blue L63

Black L L L L L L L L L L L L L L L L L L

Dark

Light

White H H H H H H H H H H H H H H H H H H White L63

R5 R4 R3 R2 R1 R0

L L L L L H L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L

↑ ↓

H H H H L H L L L L L L L L L L L L H H H H H L L L L L L L L L L L L L

L L L L L L L L L L L H L L L L L L L L L L L L L L L L H L L L L L L L

↑

www.jxlcd.com

↓

L L L L L L H H H H L H L L L L L L L L L L L L H H H H H L L L L L L L

L L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L L L L H L

↑ ↓

L L L L L L L L L L L L H H H H L H L L L L L L L L L L L L H H H H H L

L L L L L H L L L L L H L L L L L H L L L L H L L L L L H L L L L L H L

↑ ↓

H H H H L H H H H H L H H H H H L H H H H H H L H H H H H L H H H H H L

: :

MSB LSB G5 G 4 G3 G2 G1 G 0

: :

MSB LSB B5 B4 B3 B2 B1 B0

: :

Gray scale

L3…L60

level

-

L0 L1 L2

L61 L62

L0 L1 L2

L61 L62

L0 L1 L2

L61 L62

L0 L1 L2

L61 L62

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 12/26

Document No. DC170-006152 Revision 1.0

5.0 INTERFACE PIN CONNECTION

5.1

TFT LCD Module

Pin No. Signal Description

1 NC No Connection 2 VCC 3.3V Power Supply 3 VCC 3.3V Power Supply 4 V_EDID EDID 3.3V Power Supply 5 NC No Connection 6 CLK_EDID EDID Clock 7 DATA_EDID EDID Data 8 RXIN0- LVDS Signal - channel0-

9 RXIN0+ LVDS Signal+ channel0+ 10 GND Ground 11 RXIN1- Data Input channel112 RXIN1+ Data Input channel1+ 13 GND Ground 14 RXIN2- Data Input channel215 RXIN2+ Data Input channel2+ 16 GND Ground 17 RXCLKIN- Data Input CLK18 RXCLKIN+ Data Input CLK+ 19 GND Ground

www.jxlcd.com

Note

20 NC No Connection 21 NC No Connection 22 GND Ground 23 NC No Connection 24 NC No Connection 25 GND Ground 26 NC No Connection 27 NC No Connection 28 GND Ground 29 NC No Connection 30 NC No Connection 31 VLED_GND LED Ground 32 VLED_GND LED Ground 33 VLED_GND LED Ground 34 NC No Connection 35 PWM PWM Signal for LED dimming control 36 LED_EN LED Enable Pin (+3V Input) 37 NC No Connection 38 VLED LED Power Supply 5-21V 39 VLED LED Power Supply 5-21V 40 VLED LED Power Supply 5-21V

：

The brightness of LCD panel could be changed by adjusting PWM

：

：：

：

CN1 (Input signal): IPEX 20455-040E-12 (IPEX or equivalent)

：

：：

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Supply Voltage

3.0v

td

Document Title HSD101PFW1 Specification for Wealth Star Page No. 13/26

Document No. DC170-006152 Revision 1.0

6.0 ELECTRICAL CHARACTERISTICS

6.1 TFT LCD Module Item Symbol

VDD 3.0 3.3 3.6 V Note (1)

Current of power supply

Inrush current

Note (1): V

When VDD operating within 2.7V≦VDD<3.0V，td≦10ms , the display may

VDD<2.7V , VDD dip condition should also follow the Power On/Off

www.jxlcd.com

DD-

momentarily become abnormal.

conditions for supply voltage.

IDD - 0.266 0.303 A

I

RUSH

dip condition:

Min. Typ. Max. Unit

VDD =3.3V、L0 pattern

Ta=25℃ fv=60Hz

- - 1.50 A Note (2)

Note

VDD

GND

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 14/26

Document No. DC170-006152 Revision 1.0

Note

www.jxlcd.com

：

(2) Power on Inrush current test circuit

：

：：

www.jxlcd.com

VDD

0.9VDD

0.1VDD

0V

0.5 ms

Vin rising time

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

2.5/7T

5.5/7T

Document Title HSD101PFW1 Specification for Wealth Star Page No. 15/26

Document No. DC170-006152 Revision 1.0

6.2 Switching Characteristics for LVDS Receiver

Item Symbol Min. Typ.

Max. Unit Conditions Differential Input High Threshold Vth Differential Input Low Threshold

Input Current Differential input Voltage

Common Mode Voltage Offset VCM (|VID|/2)

6.3 Bit Mapping & Interface Definition

7T

6.5/7T

4.5/7T

3.5/7T

1.5/7T

0.5/7T

RCLK

www.jxlcd.com

Rin0

－

Vtl -100

I

IN

|VID|

-10

0.1

－－－

1.25

R[2] R[1] R[0] G[0] R[5] R[4] R[3] R[2] R[1] R[0] G[0]

100 mV

VCM=1.2V

－

mV

+10 uA

0.6 V

2.4-(|VID|/2) V

Rin1

Rin2

B[4] B[3] B[2] DE

G[2] G[1] B[1] B[0] G[5] G[4] G[3] G[2] G[1] B[1] G[3]

Pervious cycle Current cycle

LVDS Receiver Input Timing Definition

(VS)

(HS)

B[5] B[4] B[3] B[2] DE

for 6bits LVDS input

Next cycle

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 16/26

Document No. DC170-006152 Revision 1.0

6.4 Interface Timing (DE mode)

Item Symbol Frame Rate -- 55 60 65 Hz Frame Period t1 612 625 681 line Vertical Display Time t2 576 576 576 line Vertical Blanking Time t3 36 49 105 line 1 Line Scanning Time t4 1160 1200 1252 clock Horizontal Display Time t5 1024 1024 1024 clock Horizontal Blanking Time Clock Rate t7 39 45 51.42 MHz

Timing Diagram of Interface Signal (DE mode)

www.jxlcd.com

t6 136 176 228 clock

Min. Typ. Max. Unit

X574 X575 X576

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

0.9V

DD

0.6V

50%

Document Title HSD101PFW1 Specification for Wealth Star Page No. 17/26

Document No. DC170-006152 Revision 1.0

6.5 Power On / Off Sequence

Power Supply

Power On

Power

Off

0.9VDD

0.1VDD

0V

Signal

0V

Backlight

(Recommended

www.jxlcd.com

TP1

TP2

TP5

)

Item Min. Typ. Max. Unit Remark TP1 0.5 -- 10 msec TP2 0 -- 50 msec TP3 0 -- 50 msec TP4 500 -- -- msec TP5 200 -- -- msec TP6 200 -- -- msec

TP3

TP6

50%

0.1VDD

TP4

0.1V

DD

Note

：

(1) The supply voltage of the external system for the module input should be the same

：

：：

as the definition of VDD.

(2) Apply the lamp volatge within the LCD operation range. When the back-light turns

on before the LCD operation or the LCD truns off before the back-light turns off, the

display may momentarily become white.

(3) In case of VDD = off level, please keep the level of input signal on the low or

keep a high impedance.

(4) TP4 should be measured after the module has been fully discharged between

power off and on period.

(5) Interface signal shall not be kept at high impedance when the power is on.

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 18/26

Document No. DC170-006152 Revision 1.0

6.6 Backlight Unit Parameter Symbol Min Typ Max Units Condition

LED Current IF -- 20 20.6 mA LED Voltage VF 3.0 3.2 3.4 Volt

P

LED Power consumption

LED Life-Time N/A 10,000 -- -- Hour

Note (1): Calculator value for reference P=IF x VF x N (LED Qty’)

Note (2): The LED lifetime defines as the estimated time to 50% degradation of final

luminous.

6.7 LED Driver

6.7.1 Absolute Maximum Ratings

Item Symbol Min. Max. Unit Note

LED Power Supply voltage LED_EN, PWM pin Voltage

www.jxlcd.com

6.7.2 DC Electrical Characteristics

--

LED

V

LED

VEN, V

-0.3 24 Volt

PWM

1.75 1.89

-- 5.5 Volt

Watt

Ta=25℃ Ta=25℃ Ta=25℃

Note (1) Ta=25℃ IF=20mA

Note (2)

Parameter Symbol Min Typ Max Units Remark

LED Power Supply Voltage

LED_EN High Threshold

LED_EN Low Threshold

PWM High Threshold

PWM Low Threshold

PWM Frequency PWM Duty Cycle

be disclosed, distributed Corporation.

V

PWMH

V

PWML

F

LED

ENH

ENL

PWM

T

D

5.0 -- 21.0 Volt

2.0 -- -- Volt

-- -- 0.3 Volt

3.0 -- -- Volt

-- -- 0.2 Volt

--

200

10 -- -- % Note(1)

300

Hz

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Dimming

Signal

, PWM

LED Enable

, LED_EN

0.9V

T

t

Document Title HSD101PFW1 Specification for Wealth Star Page No. 19/26

Document No. DC170-006152 Revision 1.0

Note: PWM Duty Cycle. Pulse duty the bigger the brighter.

Duty Cycle TD= (t / T) x 100%

6.7.3 LED Power on/off sequence (Only A00, A01)

LED Power Supply, V

LED

T1 T2 T4 T5 T3

0.1V

0V

LED

0.1V

LED

www.jxlcd.com

0V

www.jxlcd.com

0V

Symbol

T1 T2 T3 T4 T5

Note: The duty of LED dimming signal should be more than 20% in T2 and T3

Min Typ Max

10 -- -10 -- -50 -- --

0 -- --

10 -- --

Value

Unit

ms

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

C(30min),100 cycles

100

20 40

50

Document Title HSD101PFW1 Specification for Wealth Star Page No. 20/26

Document No. DC170-006152 Revision 1.0

7.0 Reliability test items

No.

1 High Temperature Storage Ta=+60oC, 240hrs 2 Low Temperature Storage Ta=-20oC, 240hrs

High Temperature Operation Ta=+50oC, 500hrs

3

Low Temperature Operation Ta=0oC, 500hrs

4 5 Thermal Cycling Test (non operation) -20oC(30min)→+60

Vibration

6

7 Shock

Storage / Operating temperature

www.jxlcd.com

Note .Max wet bulb temp.=39oC

Item Conditions Remark

o

Sine Wave

1.5G, 5~500Hz, XYZ 30min/each direction Half-Sine, 200G, 2ms, ±XYZ, 1time

-40

Humidity (%)

-20

90

80

60

40

Storage Range

20

10

0

Temperature (oC)

Operating Range

60

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 21/26

Document No. DC170-006152 Revision 1.0

8.0 OUTLINE DIMENSION

8.1 Front View Outline Dimension (Update: 2009/4/08)

www.jxlcd.com

Note:

1. Model: HSD101PFW1-A00

2. Outline: 235*143*5.2(max)

3. Customer nut:4-M2(nut depth

4. General tolerance:+/-0.5mm

5. I/F connector

6.

7. Unit: mm

nit : mm

0

Cutaway view A-A[2]

Scale: 4:1

18mm-max)

Part 20455-040E-12 or equivalent User mounting torque spec: 2kgf-cm

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 22/26

Document No. DC170-006152 Revision 1.0

8.2 Back View Outline Dimension(Update: 2009/1/16)

www.jxlcd.com

BM Assembly Tolerance

| A-A’ | ≤ 1 (mm)

| B-B’ | ≤ 1 (mm)

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Rev

: *

-A

EDX.X 6 A0

Document Title HSD101PFW1 Specification for Wealth Star Page No. 23/26

Document No. DC170-006152 Revision 1.0

9.0 LOT MARK

9.1 Lot Mark

1

Code 1,2,3,4,5,6: HannStar internal flow control code. Code 7: production location. Code 8: production year. Code 9: production month. Code 10,11,12,13,14,15: serial number.

Note (1) Production Year

Year 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015

Mark 6 7 8 9 0 1 2 3 4 5

Note (2) Production Month

Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.

Mark 1 2 3 4 5 6 7 8 9 A B C

www.jxlcd.com

9.2 Location of Lot Mark

www.jxlcd.com

(1) Location : The label is attached to the backside of the LCD module. See Product back

view. ( Section 8.0 : (2) Detail of the Mark : As attached below (3) This is subject to change without prior notice.

OUTLINE DIMENSION )

HSD101PFW1

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 24/26

Document No. DC170-006152 Revision 1.0

10.0 PACKAGE SPECIFICATION

10.1

Packing form

LCM Model LCM Qty. in the box

HSD101PFW-A

10.2 Packing assembly drawings

Inner Box Size

50 pcs/box

www.jxlcd.com

460 x 316 x 321

(mm)

H

Notice

HSD101PFW1-A Material Notice

Box Corrugated Paper Board

Partition/Pad Corrugated Paper Board

Corner Pad Corrugated Paper Board

ESD bag PE --

(AB Flute)

(B Flute)

(AB Flute)

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 25/26

Document No. DC170-006152 Revision 1.0

11.0 GENERAL PRECAUTION

11.1 Use Restriction

This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.

11.2 Disassembling or Modification

Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.

11.3 Breakage of LCD Panel

11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin.

11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately.

11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and

rinse thoroughly with water.

11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is

broken.

11.4 Electric Shock

www.jxlcd.com

11.4.1. Disconnect power supply before handling LCD module.

11.4.2. Do not pull or fold the LED cable.

11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector

or cables in order to prevent electric shock.

11.5 Absolute Maximum Ratings and Power Protection Circuit

11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.

11.5.2. Please do not leave LCD module in the environment of high humidity and high temperature for a long time.

11.5.3. It’s recommended to employ protection circuit for power supply.

11.6 Operation

11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.

11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly.

11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.

be disclosed, distributed Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not

or reproduced in whole or in part without written permission of HannStar Display

Document Title HSD101PFW1 Specification for Wealth Star Page No. 26/26

Document No. DC170-006152 Revision 1.0

11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading.

11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent.

11.7 Mechanism

Please mount LCD module by using mounting holes arranged in four corners tightly.

11.8 Static Electricity

11.8.1 Protection film must remove very slowly from the surface of LCD module to

prevent from electrostatic occurrence.

11.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge. Persons who handle the module should be grounded through adequate methods.

11.9 Strong Light Exposure The module shall not be exposed under strong light such as direct sunlight. Otherwise,

display characteristics may be changed.

www.jxlcd.com

11.10 Disposal

When disposing LCD module, obey the local environmental regulations.

www.jxlcd.com

be disclosed, distributed Corporation.

HannStar HSD101PFW1-A00 Product Specification

Specifications and Main Features

Frequently Asked Questions

User Manual